As the title states I'm after all your thoughts on a lift pump for a td42t. The problem is after a few hours I need to prime her to get her to start. I've replaced and tightened all hoses around the primer/filter and the IP. Replaced washers in the banjo as there was a fuel leak from there initially. Changed fuel filter etc. When I get a bit more time I'll track it backwards to the tank and inspect lines but its not leaking any fuel. I'm almost over it. Thought I'd chuck in a pump and hope it sorts it out or at least show where the leak is. Open to ideas thoughts and opinions. Thanks Guys & Gals