Ok new to me Safari. 94, auto td42t, 24volt.
The stereo was replaced and aftermarket 10a converter put in its place by previous owner. He/she also ripped out the stock clarion reducer from the rear panel ( I can see the scraped paint from the screw heads) and cut the wires...
Problem is that the 12v Speedo, clock, temp, oil and fuel gauges dont work, but the 24v lights and volt meter do. I found only one line with 24volts going to the dash the rest is grounds or nothing.
So I assume they didnt rewire anything except the stereo, as there is no other wires running from it.
I found this under the carpet under passenger rear seat.photo.JPG
but I cant see where it goes, there is no wires where the converter should be.
Any help on where to tie my 12volts back into would be great. I cant pass inspections without basic guages.
Any thoughts?