G'day all,

As the title states 'I need some helpies'. I have the basic principle of wiring things together. What has me stumped is what lead needs to go into what port on the back of the ARB switch.

What I have is:
LED Lightbar from eBay. (2 wires, black/red)
ARB switch from them. (5 pins at the back of the switch)
40amp wire loom from supercheap auto. (wire everywhere)

I was about to install it tonight, until I took a closer look at the back of the arb switch and found more connections than i need. The supercheap switch has 3 wires coming out of it.

Basically, what goes where please & if you have pretty pics to help me, that would be super.

I was trying to upload images, but they are tooo big, sorry

CHeers

Adam