I have been smashing front indicators for a while now and have now binned them in favour of some nice LED ones
Eventually I'll be doing an exo cage but in the mean time cast your eyes over this little mod
Here's the damage I started with, both wings cuffed, both indicators trashed
The other side's just the same and you'll also note that the grill is broken after some extreme snow bashing last month.
So time to get it sorted and glass fibre it for some local repair strength.
Cleaned up the mud and cracks then clamped and tied it all ready for GRP
Looks heath robinson but worked a treat . You'll see here I've also glassed up the old indicator holes ready for the LED conversion.
I just taped a bit of card board to the hole and slapped on the glass.
Here's the other side after a quick clean up, ready for a 1st fill. I'm using glass fibre filler for extra strength.
Now you get the feel of the final shape now it's filled a bit more.It will end up being flush with the rest of the grill shape.
Here's the LED units I'm fitting. They're side and indicator ones. Water proof too.
Next a quick template out of the box they came in and the wife's chopping board. I got a rollocking last time for using the table
Part 2 coming up, photo restrictions apply
Reply With Quote