6lt into Nissan Qld Transport Regulations - Queensland
Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
6lt into Nissan Qld Transport Regulations - Queensland
Hi, this is just a bit of advise for all that are thinking about engine replacements.
The maximum size petrol motor that you can fit into a full size 4wd is 5.8lt/351ci.
Where as the 6.2 & 6.5 Chev diesel can be fitted and plated under the LA1 Code.
Anything over 5.8 excluding the 6.2 or 6.5 (Chev) diesel you must first seek approval from Vehicle Standards/Qld Transport to fit motor (Form 1854).
If approved they will then give you an approval letter which you then give to your Engineer or Approved Person for plating. This is a one off Approval and it must be sought again if you are going to do another one.
Cheers
David
Last edited by MudRunnerTD; 14th May 2012 at 05:52 PM.
Reply With Quote