OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 17

Thread: GU Break system questions

Threaded View

  1. #12
    Patrol Freak
    Join Date
    Sep 2011
    Location
    adelaide
    Posts
    1,352
    Thanks
    1,809
    Thanked 1,646 Times in 732 Posts
    Mentioned
    18 Post(s)
    Tagged
    0 Thread(s)
    Hi JoseM
    All the systems are the same .There is no proportioning valve the only valve is the load sensing valve.
    Your problem can be solved by increasing the booster output , replacing the master with a smaller diameter one [not recommended ] You can also fit high coefficient brake pads.
    If the load sensing valve is not adjusted or working properly you can either over brake or under brake the rear which will effect overall braking.
    also check the vacuum output ant the booster through the whole braking range

  2. The Following User Says Thank You to pearcey For This Useful Post:

    MudRunnerTD (2nd September 2013)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •