Hi all
I have a GQ 2.8 and i decided to add a front mount intercooler to it.
I am in the process of fitting the hoses to and from the intercooler and am wondering weather the boost pressure will decrease after it goes through all the bends in the piping then the intercooler then back through the bends in the piping again.
and if so can i drill a hole in the inlet manifold and run the small boost pressure hose from there to regulate the boost controller and the fuel pump diaphram instead of direct from the turbo.
after all the inlet manifold is the last of the line ?
Just wondering.
Cheers