Tb42 pts on carby model.

[taslucas]

How's this?

>>>tappin from tassie

[taslucas]

Was yours once a dual fuel set up Lucas

Yep

>>>tappin from tassie

[Pezzer]

Thanks heaps.......

[taslucas]

Thanks heaps.......

No worries mate, hope it helps

>>>tappin from tassie

[jff45]

I'm trying to help Perry sort out his TPS issue with his mix of TD42 TPS and TB42 loom.

Taslucas, any chance you could take a voltage reading from the 3 wires you've shown there where you have a yellow, yellow/red stripe & yellow/blue stripe.
I think the yellow wire should have around 5v
Thanks

[taslucas]

I'm trying to help Perry sort out his TPS issue with his mix of TD42 TPS and TB42 loom.

Taslucas, any chance you could take a voltage reading from the 3 wires you've shown there where you have a yellow, yellow/red stripe & yellow/blue stripe.
I think the yellow wire should have around 5v
Thanks

Me and electronics don't mix haha. Also I don't have a multi meter... I'll see what I can do

>>>tappin from tassie

[jff45]

Ok, no worries, don't risk blowing anything..

[taslucas]

I could probably test it with my tongue?

>>>tappin from tassie

[Pezzer]

Thanks i have a fully converted td42t now but it wont select the the gears in the auto, i cannot five the elusive 5v that jff45 wants me to find. so annoying i want to drive the beast...

[taslucas]

Hmm... Without the input from the tps it should still change up gears when in drive.

So yours won't select a gear at all?

>>>tappin from tassie