Yeah I think my Tap was labelled wrong.
Yeah I think my Tap was labelled wrong.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.Originally Posted by Rogue Dung Beetle
WARNING: Towballs used for recoveries can, and do kill people and damage property.
no probs.....
Rossco (17th July 2015)
It went straight in and didn't touch anything.
Do I need to shorten?
When you're finished show me where you are putting your drain and fill plugs too! And whatever other fun stuff you are doing to the winch =]
Time for some glasses hahaha!!
Lol, nah I have a large Tap and Die kit and probably made in China, this is the second time I have come across a Tap that was the wrong size! Oh well. Fixed now.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
it's definitely 1/2" that's for sure
Ground that bolt back too mate, just to be safe.
MudRunnerTD (17th July 2015)
So I've jumped the gun and wired everything up bar the front switches on the grille for the high mount.
If I run a single cable (or just run two) from the isolator in the cab and then splice off to both switches (in and out) on the grille to both the in/out wires right near the solenoid surely that is ok?
If i have read it right then that should be fine...
AB (19th July 2015)
Edit. Sorry just read your post again. Yes it will work but you already have a wire you can use at the front.
Take positive power from the LED light straight to those 2 switches in series. That power is isolated via the inside isolator switch. They just need a 12v supply they can send to the Solenoid for switching. Have another look at that drawing I did bud.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
AB (19th July 2015)
Posting Permissions
Reply With Quote