Ratchet ring spanners???

[warner01]

I have a set of spy rachet ring spanners, there short stubby ones and are bloody awsome i use em all the time. not sure on exact price but there pretty good value and would be in your range.

[AB]

Thanks gents!!!!!

[my third 256]

got a set of powerite from repco $60.00
dont forget the discount

[fracster]

These are bloody great, dunno if available in Aus, but would assume they are.American spanners and are damned good mate.


https://www.cromwell.co.uk/KEN5823990K

[krbrooking]

Ratchet spanner are awesome I use them every day at work. Be sure to get a half decent set as not sure bout the brand we use but on some of them from the continual use and strain some of them are put under the ratchets have stripped out in quite a few of them. But then we don't have the choice of doing the nut up most of the way and using a normal ring to lock it up.

Sent from me using Forum Runner

[@GUte]

Usually the better the quality the smaller the ratchet head and tighter/narrower degree of throw. Nothing worse than an a ratchet spanner that won't travel to the next 'stop' in a tightish spot. You'll need to carry a set of standard ring spanners for the tight spots too small for the ratchet head if these are for carrying in the 4B.

[menace 2]

I carry my set in a Southern Cross Canvas tool roll and have added a second 10mm ring spanner, a 22mm ring spanner and a 10" shifter. Perfect for all jobs on a Patrol.

where do you get the tool rolls MR ?

[Maxhead]

where do you get the tool rolls MR ?

This is the one I use for work everyday and can vouch for its quality. ...http://henchmanelectronics.com/tool-roll-p-3613.html

[BigRAWesty]

Soooooo....... I think your talking about ratchet spanners?

I have Gearset and they are awesome. Very very happy with them. I'd also but Kingchrome. Metric only and wil serve you well.

Was thinking the same thing bahahahahahaha..

Never had an issue with sidchrome.
But it's the $$$ which is had to swallow..

Hit up old mate Paul (led co.) he once sent me a promotional 13 & 14mm ratchet ringy..
Seems good, haven't broken it yet.. Just wish he'd send me some more lol

[MudRunnerTD]

where do you get the tool rolls MR ?

I have the Southern Cross Canvas roll. It is perfect. I have given it a hard kms and I will give it to my grand kids I reckon !! I ummed and ahhhhed about buying it at the time cause I was short of cash, it was only $25 and it's awesome!!!

The difference between the SC and the one Nisshead has posted is the SC is one side only, the other side acts as a flap over the tooled when it's rolled for added protection. The pockets are deeper too as they are the length of my spanners so the whole spanner goes in. Ther is a spot to every spanner in my set which is a full set of metric and still a space for the big shifter and a 22mm. I have marked it up with a black texta for each slot and it works awesome!! A few here have seen it when out on the tracks and it's complete.

I'll take a pic of it and post it up. There is a pic of them on their website but they have filled it with a heap of tools and it's not as tidy as just the spanners. Love it! I note though that they have improved the design and added reinforcing to 4 of the larger pouches and hoops for the corners to hang it. I have had mine for 4 years and rate it highly and have not had a need for the improvements above.