Fuel range GU 2010

[Avo]

Wow these are quite high..
I'm getting 14.5 out of my na brick. That's combined highway and town..

your telling me mate,thought it would be a lot better to be honest..i got 16/100 on me Q last trip up north loaded with roofracks and campertrailer in tow.

we drive mainly open roads but heaps of hills and slow corners,so it's not get up to speed and hold it either..IT HAS TO GET BETTER....

[BigRAWesty]

Has it been tuned for power at the expense of Fuel??

[Avo]

Dunno.....ex dept of transport mate,airbag suspension,bar work side steps,and FAT tyres..

[kevin07]

Has it been tuned for power at the expense of Fuel??

nothing to tune unless you chip it then tune the chip

[kevin07]

your telling me mate,thought it would be a lot better to be honest..i got 16/100 on me Q last trip up north loaded with roofracks and campertrailer in
we drive mainly open roads but heaps of hills and slow corners,so it's not get up to speed and hold it either..IT HAS TO GET BETTER....

16 loaded that's pretty good

[Avo]

16 loaded that's pretty good

and it pulls like a 15 yr with a good mag and no one home....

enough stuff in it to camp out bush for weeks,worst I ever get is 20/100 and that's driving at 110-130 towing,got done to..30 km over cause I had a trailer..never knew that until then either

[Warwick89]

Buy a scan gauge. Easily the best "under $200" accessory you can have on a CRD.

I went into the ute shed up in midland today and he said that the scngauge II won't fit my 2010 GU CRD, even showed me that the plug wouldn't fit? I just found something on scangauge website that says some nissans need extra pins added. Anyone know what the go is?

[Dazzalco]

I went into the ute shed up in midland today and he said that the scngauge II won't fit my 2010 GU CRD, even showed me that the plug wouldn't fit? I just found something on scangauge website that says some nissans need extra pins added. Anyone know what the go is?

Don't know about 2010 model but I bought one for my 2013 model and fitted fine. I am pretty sure as long as it has a OBD2 connector it should work mine work very well and have no complaints about it. Did you try to hook it up

[Warwick89]

image.jpgimage.jpg

Don't know about 2010 model but I bought one for my 2013 model and fitted fine. I am pretty sure as long as it has a OBD2 connector it should work mine work very well and have no complaints about it. Did you try to hook it up

Tried hooking up one of his dummy connectors to see if it would fit but a couple of pins were different.

I'll attach a photo of my connector.

[Fry]

All common rails should be fine. They connect to the port under the steering wheel.

http://scangauge.com.au/compatibility-nissan/