I had a similar issue in my gq when it's was 4.2 carby .
It was the points not opening , cleaned them with emery paper , which fixed it .
I had a similar issue in my gq when it's was 4.2 carby .
It was the points not opening , cleaned them with emery paper , which fixed it .
Well the others have covered most of it all add on more, their is a covered spring atached to the carby at the back near the top whitch is your lean/ rich mixture lossen the three scrws and rotate the plastic cover. also might have water in the carby (hope not) strip down and clean...
well i hope you find the answer good luck
hi GQ88,Originally Posted by GQ88
im pretty sure hes sorted the problem out after 2 years haha.
just somthing we ask of our members on here mate. could you please head over to the introduction section and introduce yourself.
cheers mate
rusty
Last edited by rusty_nail; 4th September 2013 at 01:55 PM.
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Posting Permissions
Reply With Quote