have done the full nads 5months ago and is doing everything it should without any issue's. [good egt and no over boosting]question is should the battery been disconnected for an hour or so to reset ecu after this mod?
have done the full nads 5months ago and is doing everything it should without any issue's. [good egt and no over boosting]question is should the battery been disconnected for an hour or so to reset ecu after this mod?
3lt GU 111 Wagon 2 inch lift,3in Taipan exhaust, cross country intercooler,catch can,EGR blocked, dawes and needle valve,Pyro/boost gauge ARB lockers,steinbaurer chip, long range tank, s/s water tank, draws, warn winch, and other stuff.
Some say yes. I say no. I have never disconnected the battery after doing any of this work. Doesn't really matter if you do anyway. Only takes a minute.
june (8th June 2013)
not that I have any problems, I will be leaving it alone. but for others that my want to disconnect their battery to reset things, how long a time? is it just minutes or a lot longer.
3lt GU 111 Wagon 2 inch lift,3in Taipan exhaust, cross country intercooler,catch can,EGR blocked, dawes and needle valve,Pyro/boost gauge ARB lockers,steinbaurer chip, long range tank, s/s water tank, draws, warn winch, and other stuff.
Half an hour is fine as a clean of the Maf can be done at the same time.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Posting Permissions
Reply With Quote