The Knife Thread

[threedogs]

[ATTACH=CONFIG]39682[/ATTACH

]Not the prettiest knife going around but its one of two cast blades I have.
Sure does hold an edge and carves up a roast in no time

[oncedisturbed]

Very nice work on the blade. Have been keeping my eye on those strops. Looking at block mounting my 1st once

[oncedisturbed]

Slightly off topic but the new ring was delivered today

[threedogs]

My dad was in the 13th squadron and 30th squadron up Darwin during ww2

[oncedisturbed]

Cool TD, 10th was originally 21 Water Transport in Darwin, your dad may remember the unit.

Picked up 2 more knives on special, not a Bear Grylls fan at all but damn Gerber make some good blades.

Picked up the Ultimate kit and a Tactical Small Samurai with 5 fold blade.

[oncedisturbed]

StOOpid MC didnt let me post pics, will try again.

[threedogs]

Dad passed in 2002 sadly I miss the him big time even tear up writing this.

I have been searching through Knives all day and found a great design.
As I have brass plate I'm going to make a Buck 110 folder but as a fixed blade,
instead of Pakka wood inserts I'll use bone and scrimshaw it, I'll cut the knife out tomorrow.
Will end up an 81/2 inch knife, Querky I think
http://www.ebay.com.au/itm/271228848788?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

Edit::: it will look like picture but fixed, cant wait to start it.

edit again::: I like that hammered look but needs to be on the right knife, yours is good

[oncedisturbed]

That would look sweet when finished, that damascus version is a different spin on it and would look tops when finished.

I wasnt sure on the small samurai in the package but the photo doesnt do it any justice being a bit dark but once I took it out was heaps better.

Sorry about your dad TD, wasnt aware. Should have the timber rattler and mountain man this week.

Checked the bucks in Anaconda yesterday and they wanted $150 for the standard 110, fell over backwards

[threedogs]

No harm done mate he was a great father/man.

That 110 is my sons be he doesn't use it so it stays with me..
Buck also do a file knife as a memory of when they first started I suppose.
http://www.ebay.com.au/itm/220389212679?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648


Edit ::: open to ideas on how to do bolsters and inlay should I one do it so it looks like a folder flush on the top and open underneath
OR just finish it flush on both sides

$150 is just thieving, just wrong when ppl get greedy.
I can get it from Buck cheaper than that

[oncedisturbed]

Yup cheaper direct from Buck, try making some mock scales and bolsters from cardboard etc as an overlay and see how it looks and then try different versions maybe even a hidden tang with a fore finger groove below the top bolster / hilt.

Trying to make an order on Budk but the iglobal part is having a fit, the sales code gives a 2 for 1 so 6 knives for the price of 3, if it comes back online will place the order and the prob sell off 3 of them

[threedogs]

good luck with iGlobal,
I think I'll make it so anyone I show will want to close it LOL
I've got some red spacer material here so that will highlight between brass bolster and bone inlay
There is even a timber rattler 110 buck,

[oncedisturbed]

Muah 110 rattler drooooools

When I finish off some designs, will snag your email off you and send you some designs if interested

[threedogs]

ok started my 110 fixed, I sprayed the Damascus flat black and straced the 110 shape on it
Need a little tweaking to finalise the shape , but happy so far

[oncedisturbed]

Looking forward to seeing the finished product. Did you use a plasma cutter to cut the blank?

[threedogs]

No I cut the basic shape with a 5" grinder and finished the shape on my Linisher.
Not worried about the heat marks as I need to harden and temper it later on.
I'll bet money now all I show it to will try and close it LOL.
As My PM says need to locate pins for the timber side inserts


http://www.ebay.com.au/itm/1-16-dia-brass-rivets-3-8-Long-QTY-100-Round-Head-/230921558510?pt=UK_DIY_Material_Nails_Fixing_MJ&hash=item35c3ff59ee

Rapt found some they will make it look original OHH AHH Glen McGrath
Good shop for pins, lanyard holes even brass spacing material
Just didn't have enough material for a small hump across the back section

Heres a good example of what to use those pins for, I only need 8 that leaves 92 left lol

http://www.ebay.com.au/itm/281087598821?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

[threedogs]

Timber Rattler Bowie arrived this morning WOW what a knife.
great weight to it feels very nice, buffed off the "Pakistan" name easy enough
later on today I will peen the tip straight on my anvil
FYI that timber under the knife is 160 years old

[Gecko17]

I see that Gil Hibben has a Bowie out called 'Big Highlander'.... may have to get it... :D

[threedogs]

@ HL any pics of it,,,, wouldn't mind this one, that TR bowie only cost me $22US
http://www.ebay.com.au/itm/400650107848?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649


s this the one

http://www.ebay.com.au/itm/Gil-Hibben-Highlander-Bowie-Mirror-Polished-Blade-Wire-Wrapped-Handle-GH627-/301077821144?pt=AU_Hunting&hash=item4619a2f6d8

[oncedisturbed]

Budk had a highlander bowie, not a GH one but very similar

[threedogs]

seems a lot of knives are the same and made by other ppl.
the TR was cheap cause it was damaged and United cutlery are out of business
This folder is supposed to be a buck
http://www.ebay.com.au/itm/110716888297?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

@ OD can you explain a molle please

[oncedisturbed]

Wtf? When did united go under?

MOLLE is a modular nylon / gortex / rubber mounting attachment system that allows a user to configure their webbing, patrol pack etc in a way that is easy accessible to items / pouches via straps or clips like the old Alice clip system.

[threedogs]

that's what was written about my TR bowie they are United aren't they
My TR bowie is dis continued stock. Shrade went under too, about 10 years ago
another Buck copy for $15, this one has a bit of weight to it this time, these I'll use at camp
I'll store the Buck away

[oncedisturbed]

Very noice knives. I will see what I can find on UC.

The Gerber LMF II came in today, awesome bit of kit and sturdy knife with weight behind it

[oncedisturbed]

Just checked, UC are still operating and not gone under. They partnered with the USMC in 2013 and the producers of the hobbit for rights to make their products.

[threedogs]

Ok cut the brass for bolsters, note to self "brass get damn hot really quick".
It will looks heaps better polished and the Damascus etched out some more.
This is going to look awesome, if my image of it finished is right ,for the
inlay I'm now going bone then a 4mm slice of copper then more bone, mosaic pin
in each piece of bone
@ OD need apic

[oncedisturbed]

That is looking good TD, do you mean a pic of the new Gerber?

[threedogs]

Yeah any pic is good,
check out the size difference between the Gil Hibben and the timber rattler.
nearly makes it look like a pen knife LOL

[oncedisturbed]

Holy moly, das is huge butter knife. My TR was put in the post today and should get my other Bowie this week touchwood.

Will take some pics of the new Gerber beside my Bear Grylls version and post up


Sent from my iPad using Motorculture mobile app

[threedogs]

Good thing butter never came in tubs back then , you'd end up spreading someone's fingers.
next big knife I think will be Nachez bowie, or Arkansas toothpick.
Know how to display them now, biggest down to the smaller ones I have

[oncedisturbed]

I want to do the same with bayonets when I have enough, going to mount them in a fan pattern like a rising sun emblem.

Here are some promised pics. You can see the size difference and similarities of the blade, the orange version being a non military style size.

[oncedisturbed]

And another

[oncedisturbed]

Both are very comfortable to hold but I think the orange version is slightly more comfortable than the black version. The black 1 is by far the better knife overall though as it had a bit of extra weight behind it and will chop small branches better if need arises.

[threedogs]

I have that many now its hard to have a favourite,
Friday I'll stock up on buff and camel scales.
Will also be getting some fillet knife blanks,

[oncedisturbed]

just hanging out for the new bowies and mountain man to be delivered

[threedogs]

waiting on a few myself. started to put an edge on the
fixed 110 I'll take a lot of time doing this before I temper it.
Plus some pics of my others, all for sale if anyone wanting
wants one except the brass and bone sharp finger skinner
None would let you down in the field.
Once again brass get extremely hot when you grind it lol
again this is only some of them, there is this much again and then some

[oncedisturbed]

Anychance you could pm me the prices at all, I may be interested in 1 or 2

[threedogs]

4 of them are actually buck[branded].seems I like the brand, but I originally only brought the knife for the shape.
as you can see very alike sort of. But as I said I'm a fixed blade guy ever since I first played cowboys and Indians
I like those knives you get cause out n the field you can belt them with rocks/hammers etc to cut something
Should do a photo like Chopper Read with his arms crossed using the two Bowie

I will be putting my bayonet on ebay very soon

[megatexture]

next time your making a knife use this stuff to coat the handle comes in many colours and patterns they use it on gun stocks and car dashes also it looks like awesome stuff


http://youtu.be/wj6W7NQWPQo

[threedogs]

@ Mega great find sure that would be handy for a hunter,
I saw a similar thing on Mega Factories where they dipped
Compound bows into a solution and they came out Camo.
Can see everyone doing their mag-lite which has me beat

[megatexture]

Yea I saw a vid and they did car dash in wood grain and also carbon fiber then did a gun also looked wicked!

[oncedisturbed]

Here is a site with full measurement conversion for scales pins and screws

http://mdmetric.com/tech/cvtcht.htm

And a site for pins, rivets and mosaic pins

http://www.knifeblanksaustralia.com/apps/webstore/products/category/1029445?page=1

[oncedisturbed]

whOOps, had to do it, just scored this badboy :oops::smileyvault-cute-bi

39921

[BigRAWesty]

whOOps, had to do it, just scored this badboy :oops::smileyvault-cute-bi

39921

How thick is that thing..

[oncedisturbed]

4.6mm across the back of the spine at it's widest

[BigRAWesty]

That's a biggin

[oncedisturbed]

Oh yeah :) going to look at maybe using jarrah scales and use rivet screws to fasten them with a countersink bit

[threedogs]

Nice blank, here's an idea for the handle,
Now you'll need to make a sheath for it
http://www.ebay.com/itm/281087598821?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
Have all the brass cut ,now need to shape it a bit better before putting it on , as it will generate too much heat.
I have small brass rod that will be perfect ,middle pin is a bit of a worry

[Gecko17]

Oh yeah :) going to look at maybe using jarrah scales and use rivet screws to fasten them with a countersink bit

I have HEAPS of Jarrah if you need any... bench saw and thicknesser too to dress if you need to.

[threedogs]

these are the clamps I use plus I have some small 2" vices that help as well.
As you can see I have an edge on it now.

@OD that's a lot of width for a 5.5in blade

[oncedisturbed]

Nice clamps, need to get something like that as well, already 2 small vices.

With it's size, should be nice and sturdy.

[threedogs]

They are old clamps they resemble old blacksmith post vices of yester year.
I have two blacksmith vice one is 57kg and 6" jaws the other is a 4" peter wright,
but I don't use that one. Don't know what trade they were used I think sheet metal not sure,

Just looking at your blank you could re-grind the handle an turn it into a coffin handle knife, be One of a kind
This is the timber Rattler Buck 110tr. only 400 made

http://www.ebay.com.au/itm/131087342514?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

[threedogs]

http://www.ebay.com.au/itm/Adam-Shaws-1-OF-A-KIND-RARE-CUSTOM-SKINNING-KNIFE-CAMEL-BONE-HANDLE-DAMASCUS-/321308438552?pt=Collectible_Knives&hash=item4acf79b018

A lot of work has gone into this beauty.
@ OD I've just brought 100 x 1/16th rivets for the buck 110.
yell out if you want half for $6 , compare that to where you get supplies from.
Ive found the Aussie mobs only buy from ebay sellers and put their bit on top.
Order some awesome mosaic pins that look like a star 1/4"
Also ordered streaky buff scales and some camel bone scales.

http://www.ebay.com.au/itm/Old-Hand-Made-Saw-Back-Bone-Handle-Bowie-Fighting-Knife-10-Blade-Leather-Sheath-/151011082650?pt=Collectible_Knives&hash=item2328f6419a
Check this ripper out

[oncedisturbed]

That is a sweet skinner, that is a far better price than what I have found. Do you have pic of the rivets at all? Not sure what style I am going yet but the ones you bought me be what I am chasing and will definitely look at getting some off you. Cheers for the offer :):beer:

Still waiting on my leather thread, awls and holing chisels to come in the post.

[threedogs]

http://www.ebay.com.au/itm/230921558510?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
The ones your after slide in each other don't they, called cutlery rivets, look in the shop they have them
as well, Pretty ticked off as my knives still haven't arrived, long over due is my 5" folded schrade with bone inlay.
My 110 25th anniversary Buck, and a buck tactical folder. Lately trying to find sheaths for them all, discarding the nylon ones
and replacing with leather

Might look around some trash/treasure sites and try and find an old large file, for a hidden tang knife

[oncedisturbed]

Either those or the hex head screw type.

Currently stitching (1st attempt) an open top sheath for my 2.5" Winchester liner lock

[oncedisturbed]

Here are some pics of the sheath, should have folded and then molded shape of knife before stitching as the shape warped when drying.

Just need rub some dubbin into it to finish off the leather

[threedogs]

You're not thinking of corby bolts/screws are you.
Weakened and brought a knife, 10" overall with Abalone inserts to match my folder

[oncedisturbed]

That may them, couldn't remember what they were called

[threedogs]

Heres a pattern for you.
I'll put a link for corby screws here too
http://www.ebay.com.au/itm/140801024505?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
http://www.ebay.com.au/itm/1-4-Brass-Corby-Handle-making-Bolts-Pins-Knife-Making-Hardware-Rivets-Supplies-/121253328479?pt=Collectible_Knives&hash=item1c3b42f65f

[oncedisturbed]

That is 1 I will be making

[threedogs]

Thought that would be handy for you, thinking now of how to display, but still be able to grab one for a weekend away.
I have about 9 other knives and my folders and leatherman as well, and waiting on three from Ebay, I've got it bad eh
Are you going to use leather strips to lace up any sheaths?

[oncedisturbed]

I will be eventually. I have 5m of 1.5mm brown lace and 10m of 2mm black lace at the momemt. Still waiting on some 2.5m black lace to be delivered.
Need to track down some leather strapping / thong around 3mm in decent lengths.

Will email my roo leather guy and see what he can get his hands on.

I have a plan for an open top pancake sheath somewhere on the pc I will use

[threedogs]

Yeah sounds good and a good sheath enhances a knife,
Found this Damascus Chefs knife that broke first time I used it[Pakistan}
going to re-birth it in a clip point design

[oncedisturbed]

Just bought a heavy duty scalpel set and a burnishing set, will make cutting and moulding a lot easier

[oncedisturbed]

Any idea where I can track down patterns in pdf form at all?

[threedogs]

No idea but will keep my eyes open
@HL now I get the Gil Hibben highlander bit lol BUDk sell
them for $50, OD maybe able to get it for you via gateway.com.
back to OD that moulding looks cool, now I can see why leather working tools go for so much on Ebay
http://www.ebay.com.au/itm/Knife-Making-Pull-together-Screws-S-series-knives-PTS-/370853274433?pt=LH_DefaultDomain_0&hash=item565893e341
OD these look ok pricey but would finish off a knife well
http://www.ebay.com.au/itm/121230891977?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Another for OD take it this is a classy knife being Seki City

http://www.ebay.com.au/itm/CROSS-DRAW-KNIFE-SHEATH-TEMPLATE-SET-FOR-LEATHERCRAFTERS-LARGE-SIZED-FOLDERS-/140946842081?pt=LH_DefaultDomain_0&hash=item20d11621e1

[oncedisturbed]

Cheers TD, I saw the GH blade on Budk 140 down to 40, top discount.
Couldn't sleep last night so I drew up my own pancake design for a folder and mini maglite combo sheath

[threedogs]

now that's handy a 2 in 1

[oncedisturbed]

Got the idea from a sheath made by maglite originally but has a flap cover over the knife instead of open top.

Found a few other templates that I am keen to get as well and the guy I get my roo leather has some leath thong between 3 and 5mm in thickness, hardest part will be threading it

[threedogs]

Mag-lite eh I liked to idea from that 110 buck and saw combo a while back.
Having and making these knives are useless unless they have a sheath.
There is a mob called richardtemps or similar that sell great sheaths at good prices .
I brought 4 sharpfinger ones for less than $30 landed ,the two on RHS

[oncedisturbed]

Very nice indeed, they look like they a wedge between top and bottom layers to space it out.

[oncedisturbed]

This is the design I drew up, needs a bit of tweaking

[BigRAWesty]

This is the design I drew up, needs a bit of tweaking

If your intending to fold that and still use the belt threw you'll need 2 hoops in the middle aswell..


But the shape is good..

[threedogs]

I think that's the plan for the back of the pouch as the pouch itself is moulded I think,
Check a few links in some past posts and you'll see

[oncedisturbed]

I haven't broken down the template yet but it is a 2 piece.

The image is showing the top overlaying the bottom, basically a top view if constructed, based on a pancake sheath design.

Will break it down into 2 parts later today as I am going down to bunnings / masters shortly to pick up a pyrography kit and a few other bits.

[threedogs]

bit of a fan of the horizontal pouch. but those pancake pouches look very classy
even the ones with a clip

http://www.ebay.com.au/itm/321298677504?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
another idea

Got my eye on the BUDk behemoth bowie

[threedogs]

http://www.ebay.com.au/itm/151218992851?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

Heres a classy pancake pouch, this guy has a few

[oncedisturbed]

That is a very nice sheath, got my pyrography kit now and will track down some nice designs I can use.

I think I am on Customs radar now as I had a call from DHL who advised 2 x shipments (both from BudK) have been held by Customs pending receiving a copy of my purchase receipt and item description.

[threedogs]

never had that happen before, but had Customs seize two leatherman.
Its not illegal to buy knives from OS if you are over 18, which I'm sure you are.

Is the Pyro for some design work like a pattern of some description

[oncedisturbed]

Yup, same kit you can use for wood burning patterns, basically an elaborate soldering iron.

Had 4 knives seized last year because Customs can't tell the difference between a paracord wrapped survival knife and a throwing knife.

Never been asked to explain a purchase before either

[threedogs]

That sucks being a survival knife I take it you can un do the cord and use it in and emergency situation.
Not a fan of those throwing knives., but a big fan of the throwing axe ,those double ended jobs
As I'm starting to go diving again, Its time to look for a decent diving knife.
Get decent abalone down this way plus some calamari and my favourite red mullet[goat fish]


http://www.ebay.com.au/itm/261141709245?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

Pouch design
http://www.ebay.com.au/itm/330805355420?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

[Gecko17]

My Bowie finally arrived! That is one huge assed blade! So excited, I think a bit of wee escaped! The look on the War Office's was priceless!


Sent from my iPad using Tapatalk HD

[growler2058]

My Bowie finally arrived! That is one huge assed blade! So excited, I think a bit of wee escaped! The look on the War Office's was priceless!


Sent from my iPad using Tapatalk HD

:useless:WElL.............

[threedogs]

Picture picture picture please
As above all BS without a pic

Edit oh the Gil Hibben bowie its a horse of a knife hey

[oncedisturbed]

HL where are the pics????

Stitching by hand has knobs on it. Need to trim the edges once finished.

[threedogs]

need a small piece of steel to push the needle through or use some wax on the thread and needle.
Try dipping needle in a tin of stubbins

[oncedisturbed]

I have several different awls and needles and still waiting on the nylon thread to come in the post.

Being a test run sheath I am using a type of cotton thread at the moment with a clear nylon thread as a base thread, all the seams are triple stitched and glued before stitching to hold the seams in place.

That GH is friggen huuuuuggee

[threedogs]

Have a look at dyneema fishing line 60lb only .35 of a mil I think and cheap as chips for 3oo mtrs

[oncedisturbed]

Cheers TD, never thought of using fishing line. The dyneema line, is it nylon or braided line?

Don't do enough fishing to know the difference lol:)

[threedogs]

Very fine braided looks like the thread they used years ago making jeans when I was a sewing Machine technician,
never break it I've used it to sew some top buttons on work pants, if it does let go it'll take someones eye out lol

@ HL still waiting for pics even if it is of MOD holding it, We'll call it exhibit "A"

[oncedisturbed]

Cheers TD, will have a look next time I am near BCF etc. Just put the leather needle threw the side of 1 of my fingers, numerous choice words were said

[threedogs]

sounds like you need to grab a thimble as well,
bummer nothing in the post again, starting to get nervous
http://www.ebay.com/itm/SUPER-STRONG-PE-DYNEEMA-SPECTRA-EXTREME-BRAID-FISHING-LINE-300M-30LB-BLK-/200922091413?pt=LH_DefaultDomain_0&hash=item2ec7e3cf95
Good price for 300 mtrs
Also look at copper wire that they use re winding electric motors.
just an idea

[oncedisturbed]

Had the thimble on the other hand lol.

Packages just came in and holy hell, I thought the Timber Rattler was huge, the Tomahawk is even bigger.

Lined them up against my 2.5in Winchester

[threedogs]

That's HUGE, is the TR the Swamp Master.
nearly a sword eh in the Kukuri style

[oncedisturbed]

Not sure, just says Timber Rattler on blade and box.

The Tomahawk would be a pain to carry unless you were hunting dinosaurs lol.

Downside is they were all ground sharpened so will need to re-edge them

[threedogs]

I think the TR Swamp Master had a green Paka wood handle
EDIT Swamp Master is a BUDk my bad

[oncedisturbed]

Almost finished my custom version of a pancake sheath. Just need to soak it and let dry slowly and seal it with a dubbin rub.

[threedogs]

does all leather shrink or is this specially for that purpose
Dubbins or stubbins? I know what you mean the wax in round yellow tin

[Gecko17]

HL where are the pics????

Stitching by hand has knobs on it. Need to trim the edges once finished.

My bowie arrived late yesterday arvo, whilst I was in the middle of tidying up before I flew out so you're gonna have to wait until I get back home in 2 weeks until I can post photos of the monster! And some of the knife as well.

[oncedisturbed]

does all leather shrink or is this specially for that purpose
Dubbins or stubbins? I know what you mean the wax in round yellow tin

Being roo leather there shouldn't be much shrinkage, soaking so I can shape it to the torch and knife.

Was thinking of using neutral dubbin but if there is something better I am all ears :D

[Gecko17]

Being roo leather there shouldn't be much shrinkage, soaking so I can shape it to the torch and knife.

Was thinking of using neutral dubbin but if there is something better I am all ears :D

I'm pretty sure that neutral dubbin doesn't discolour the leather but I dear say that it may pay to try it on a test patch 1st. There is a product back in NZ called Snowseal that I have used before that doesn't change leather colour. It is a clear wax based product. Excellent waterproofing too.

[threedogs]

Oiled all blades as well yesterday, and rubbed a few sheaths with Dubbins

@HL 2 weeks that's cruel, hope your MoD doesn't confiscate it lol

[oncedisturbed]

Slowly taking shape

[threedogs]

looking good that's amazing to see.
Nothing arrived this morning, bummer

[Gecko17]

@ 3D, that Bowie is so big, I'm not sure if the MoW could lift it!

@ OD, that looks friggin awesome mate! Is that photo pre-dubbin or post? no discolouration?

[oncedisturbed]

Getting some dubbin today, have been asked to make some tac pouches to hold an led Lenser and 2 x .38 speed loaders and a knife roll lolol

[Gecko17]

Getting some dubbin today, have been asked to make some tac pouches to hold an led Lenser and 2 x .38 speed loaders and a knife roll lolol

And so your new career begins.... :D

[threedogs]

I would kill for a decent knife roll.
I brought one and first time I inserted a knife it cut.
you can see cut near my chefs knife
I have some dyed roo skins here If you want to make one out of that??
@HL puts a whole new meaning to the saying "That's a knife" eh

[oncedisturbed]

No probs at all TD, can make 1 up for you :beer:

[oncedisturbed]

All sealed and ready to use.

[threedogs]

what can I say just like a bought one , well done, and it will keep its shape now ??
I'll get some sizes up to you soon . All I know is that steel is 450 mm long
I brought 26 dyed roo skins for $30, my mate made a doona out of most of them
but I think I have about 5-6 pieces left

[Gecko17]

All sealed and ready to use.

Looks the goods alright!

[oncedisturbed]

Cheers, need to get a stronger sewing machine now lolol.

That's an awesome score on the roo leather TD.

The sheath should hold it's shape but next time I will use a thicker backing piece and make the front piece a smidge bigger to allow better shaping.

Old man is giving us all his old leatherworking tools, didn't know he had any lolol

[Stropp]

well done OD looks great mate, that new career will keep you busy for a while now.

[oncedisturbed]

Cheers Stropp, forgot I ordered more leather as it just got delivered.

4 nice, thick roo leather around 4-5mm thick, great for back plates in pouches and fixed blade knives.

Will have to order more at this rate lolol

[threedogs]

thick enough for dog breast plates etc, You may not need a heavier duty machine just change the throat plate, feed dogs and needle.
Tension wise most females will wind it up as tight as it will go but you should be able to drag cotton through the needle with little effort.
as for the bobbin the bobbin weight should be enough so if you hold the tag end it will fall free under its own weight. When you look at a normal home machine lock stitch the bit you see is the bobbin thread , use two different colours and you'll see what I mean.
4-5mm is nice and thick, my roo pelts are fashion quality

[megatexture]

I would kill for a decent knife roll.
I brought one and first time I inserted a knife it cut.
you can see cut near my chefs knife
I have some dyed roo skins here If you want to make one out of that??
@HL puts a whole new meaning to the saying "That's a knife" eh

you can get leather rolls for chisels that might be suitable

[threedogs]

I've seen them but they are made for chisels which are way shorter.
My Steel is 450 mm a chisel is what 250mm there is my problem.
I'll sort out my leather and post it over to OD to see what he can come up with

[megatexture]

get @ab to make one for you out of vinyl while hes making all out rooftop bags.

[threedogs]

Bummer nothing arrived this arvo either, getting nervous now.
At least they have a tracking number

[oncedisturbed]

Roof top bags, roof tops bags, roof top bags bwahahahahhahaha

Just saw a kniferoll going for $150 o_O :eek: downside was bloody rivets everywhere, looked damn tacky IMHO.

The missus is the sewing guru as she used to make jackets / driving suits for local race teams so will see what she recommends, been promising her new machine anywho lol

Been reading up a bit more on the roo leather and found out it's sheetloads stronger than normal cow hide etc, even the 1mm pieces are super strong, would explain why me hands are farked bwahahaha

[threedogs]

sewing machines have been a major part of my life, still repair ones from family and friends.
Not a big fan of new plastic stuff but a walking foot K6 would make me happy or an industrial plain lockstitch
. just for making things like knife rolls etc. My mate is an upholsterer, so I can get thick stuff sewn there

[Gecko17]

Unfortunately, a sewing awl and waxed thread for this novice...

My razor hasn't arrived yet... Getting anxious!

[threedogs]

same here nothing arrived this morning getting very nervous now lol
http://www.ebay.com.au/itm/230921558510?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648

@OD these are the pins if they are useful to you

Edit check this awesome sheath
http://www.ebay.com.au/itm/Indiana-Jones-Khyber-Bowie-Knife-1989-with-Rare-Real-King-Cobra-Snake-Sheath-/290805865370?pt=LH_DefaultDomain_0&hash=item43b5615b9a

only a sheath arrived boy much better than sheath I used

[Gecko17]

Woohoo! Just spoke to the MoW and she said that a parcel arrived for me on the day I flew out! Should be my razor! Here's hoping! :D

cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=121252133219&ssPageName=ADME:L:OU:AU:3160

[threedogs]

@ HL nothing happening with the link

[Gecko17]

D'oh! not sure how to set the link for a past auction... Will post photos of it when I get home. Also bidding on another one as well...

http://www.ebay.com/itm/390759689485?ssPageName=STRK:MEBIDX:IT&_trksid=p3984.m1431.l2649

[oncedisturbed]

Very nice guys, those pins are pretty much what I will be chasing and the hex head version

[threedogs]

You might as well buy from that shop he's got some
good gear at the right price I don't believe he's greedy like others

[oncedisturbed]

Will be getting some but not for a bit, just spent $350 on costumes for the missus, me and munchkin for a mates daughter's 18th next month, worked out cheaper buying than hiring.

Will put up a pic of mine later.

Starting another pancake sheath shortly but it will be for a knife / multi-tool only and have a press stud flap as well.

Still waiting on the other patterns to be delivered.

[threedogs]

Nothing arrived this morning bummer.

EDIT nothing arrived this arvo either double bummer

[oncedisturbed]

Turns out the new pancake sheath I am making has the leather to thick, won't be able to shape it properly and the press studs are too short.....doh.

Will use it as a template instead.

Might look at making a pocket sheath where the knife slips in like the leatherman sidekick sheath but add a press stud to it

[threedogs]

I like this style sheath and the simple TR one

[oncedisturbed]

I like that style as well.

I need to make up some shaping dies (think that's what they're called) so I can shaoe the top of the sheath slightly before stitching and finish shaping with knife in the sheath, not sure what to use yet, maybe some lentghts of different diameter dowel

[threedogs]

what about shaping a few different size wooden models to use

[oncedisturbed]

Possibly will end up heading that way

[threedogs]

That raiders of the ark sheath made with a king cobra ,he wanted $550
the same knife with a leather sheath was only $135,
Nice display piece though
http://www.ebay.com.au/itm/VINTAGE-NEW-FIXED-BLADE-FOLDING-KNIFE-BOWIE-DAGGER-POCKET-LOT-COLLECTION-OF-24-/201030884713?pt=US_Knives_Tools&hash=item2ece5fdd69
Nice collection especially the boxed bowies

[Gecko17]

That raiders of the ark sheath made with a king cobra ,he wanted $550
the same knife with a leather sheath was only $135,
Nice display piece though
http://www.ebay.com.au/itm/VINTAGE-NEW-FIXED-BLADE-FOLDING-KNIFE-BOWIE-DAGGER-POCKET-LOT-COLLECTION-OF-24-/201030884713?pt=US_Knives_Tools&hash=item2ece5fdd69
Nice collection especially the boxed bowies

Love that Indiana Jones Bowie.... didn't really like the sheath tho but as you said 3D, it's cheaper without that sheath.

[oncedisturbed]

Love the gold handled Sykes Fairburn

[Gecko17]

But what are the chances of getting it without Customs seizing it? I would love to get a proper Sykes Fairburne dagger but don't you have to be a collector to get them?

[oncedisturbed]

Not sure on customs, possibly not being a double edge but you would need to double check.

I have a 100th D-day landing anniversary sykes fairburn that the old man gave me for my 18th.

You can get them here in Oz and online here as well. Most are replicas and around $100.

[Gecko17]

Not sure on customs, possibly not being a double edge but you would need to double check.

I have a 100th D-day landing anniversary sykes fairburn that the old man gave me for my 18th.

You can get them here in Oz and online here as well. Most are replicas and around $100.

I remember seeing one when I was a wee tacka, 40-odd years ago... I doubt it was a copy as I was visiting a friend on a miltary barracks back in Christchurch. It belonged to his dad. Ever since then and having the contact with the ninjas, I have always wanted one...

I think that there is a ban on double-edged blades coming in to the country unles you are a registered collector but haven't gotten off my but to find out. It was one of the reasons that I wanted to join the AKG, as well as making blades as a lot of the blades I want to make will be double edged.... I have a thing for daggers, especially early european and middle-ages style daggers. Some amazing designs!

[threedogs]

I have 3 swords[Katana] that never were confiscated. I keep them safe and not many know I have them.
Customs aren't to know you are a collector, or licenced, If its not illegal to own it unlike a fantasy or
flick assisted I think you may be ok
Being a member of AKa doesn't let you own swords etc they knocked that on the head awhile ago

http://www.ebay.com.au/itm/Late-WW2-British-Australian-Fairbairn-Sykes-Commando-Dagger-Knife-pattern-3-/231149411426?pt=AU_Militaria&hash=item35d1941c62

Heres one

[oncedisturbed]

Yup, AKG unless a crafter stopped collectors membetship in 2011 due to govt wanting them to hand over all member details. You will need a permit from state police and an exemption letter from the minister.

I should have said 75th not 100th

[threedogs]

I think over here you need to fill out a form explain why you want to collect, history, artistic reasons, etc
takes a little time . there were some clubs you could join but not anymore cost for a permit here is $150,
it may be a bit more now .

[Gecko17]

Got to looking at Samurai and Ninjato swords on ebay. came across this crowd that can custom make them for you. Chinese crowd using Japanese techniques.

http://www.ebay.com.au/itm/Handmade-Japanese-Samurai-Battle-Ready-Dragon-Sword-Katana-Full-Tang-Blade/181317001481?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%2 6asc%3D163%26meid%3D4747662711469428954%26pid%3D10 0005%26prg%3D1088%26rk%3D1%26rkt%3D4%26sd%3D200923 838050%26

[oncedisturbed]

First attempt at a fixed blade sheath, ran out of length so I had to mod the belt loop.

Edit - just ordered 10lbs of 5-6oz leather to make more, need to get some leather dye

[Gecko17]

First attempt at a fixed blade sheath, ran out of length so I had to mod the belt loop.

Edit - just ordered 10lbs of 5-6oz leather to make more, need to get some leather dye

Looks great OD.

@3D... Have you seen this?

http://www.ebay.com.au/itm/BUCK-INTREPID-XL-MILITARY-USA-TACTICAL-HUNTING-KNIFE-TANTO-CAMPING-HIKING-/281215796121?pt=AU_Hunting&hash=item4179c48399

I love the look of it... wonder how much it weighs...

[oncedisturbed]

Cheers HL, very nice Buck. Don't think it will weigh a lot, my Gerber LMF wasn't as much as that Buck but looking at it, it appears that it is only for cutting etc.

Wouldn't say no if it was given to me though :D

[oncedisturbed]

Got my grinder / linisher combo and knife starting to take more shape

[Gecko17]

Got my grinder / linisher combo and knife starting to take more shape

That's looking frickin' awesome OD!

What timber is that? Stained ply?

What size knife is that?

Do they have any Wattle trees over here? Some of the ticker Wattle trees have big burls that, when dressed, are amazing for handles...

[oncedisturbed]

5" blade same size overall as the Buck 110. The wood is chocobola or similar spelling.

Need to finish this 1 off and munchkins as a matching pair.

No idea on wattle, huon pine wood be sweet but to pricey

[oncedisturbed]

whOOps, had to do it, just scored this badboy :oops::smileyvault-cute-bi

39921

This bad boy was delivered today, bugger me it has a thick blade, gonna take my time doing the scales and finishing this 1. Custom sheath will be made as well

[Gecko17]

By Thunder! That blade is thick!

What will you use for scales?

[oncedisturbed]

No idea yet, thinking maybe jarrah but will wait until I have finished the 2 110's

[oncedisturbed]

This is the wood scales I have ordered for the bowie, Kimberley Beefwood

http://www.ebay.com.au/itm/300965577762?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[Gecko17]

http://www.google.com.au/url?sa=i&rct=j&q=&esrc=s&frm=1&source=images&cd=&cad=rja&docid=LLPPZbUs-NOvKM&tbnid=-Bw_vDuDCIr1qM:&ved=0CAQQjB0&url=http%3A%2F%2Fwww.ttit.id.au%2Ftreepages%2Fearl yfloweringwattle.htm&ei=uFP9Uon8CsnFkQWFqIH4Cw&bvm=bv.61190604,d.dGI&psig=AFQjCNGcZLrqX7fEtntOxSS-hCWL8abmuA&ust=1392419957258136

This is the Watle tree wood. Not the best example but if you get the right piece, it can be stunning. I will see if I can get a couple of samples.

[BigRAWesty]

Looking good OD.
Where did you get the blank from??
I might try the scales myself.
I'm more of a modern man, so mine will be black or dark g10..

[oncedisturbed]

Looking good OD.
Where did you get the blank from??
I might try the scales myself.
I'm more of a modern man, so mine will be black or dark g10..

I think it was the ebay store Premium Knife Supply but will double check.

Ordered some brass rods for pins as I dropped my 110 kit knife and it separated.......:banghead::banghead::banghead:

[BigRAWesty]

No good. Were the scales tight on the pins??

[oncedisturbed]

Not 100 % as they had the holes slightly bigger than the pins but not enough to fall out on their own.

Have order 4-5 different sized rods and have about a dozen of them coming so I can make it fit snuggly

[oncedisturbed]

First load of rivet studs and 1 of the pancake sheath templates just got delivered. Just need the leather and can get ball rolling on some more sheaths

[Gecko17]

My latest purchase.... not a knife but still looking forward to having it.

http://www.ebay.com.au/itm/310872573118?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

[oncedisturbed]

Whilst waiting on the new brass pins to be delivered, started on another baby folder.
Only need to replace 1 pin on this knife, pity it's the 1 holding the blade to the back spring and top bolsters

[oncedisturbed]

Waiting on leather to be delivered now that I have all the cross draw and pancake sheath templates in, decided to try my hand at making wrist straps from some scrap leather. Need to finish off the press studs, stitching and burnishing and will tey and find a filigree pattern for the thin strap.

[oncedisturbed]

Just had an email from a leatherworking business in the US asking for the template of my customed pancake sheath with torch holder as they would like to make dedicated templates and stock my design. ...score

[Gecko17]

Just had an email from a leatherworking business in the US asking for the template of my customed pancake sheath with torch holder as they would like to make dedicated templates and stock my design. ...score

you beauty! Told you you were looking at your new career! Great news.

I want to get a new Bracer/forearm guard for archery... Reckon you can make it if I show you?

[threedogs]

Just be wary just giving your idea away, I'll tally up my pieces of roo leather shortly.
I'll never use it, so I'll post it over
As I'm setting up a molle system pack how do you rate this Tanto tactical
http://www.ebay.com.au/itm/Gerber-Warrant-Tanto-Serrated-Edge-FULL-TANG-Tactical-Knife-Sheath-31-000560-/261359253556?pt=AU_Hunting&hash=item3cda39b834

[oncedisturbed]

@HL, no probs at all and more than happy to give it a crack.

@TD, very nice knife, not keen on the digital camo stuff. Looks like a very basic sheath.

Chasing some leather dye if anyone knows where to get any cheap?

[oncedisturbed]

HL - have an archery pattern pack on its way that has an arm guard template and a few others, damn leather taking ages lolol

Also have 2 x roo 1/2 hides coming

[Gecko17]

HL - have an archery pattern pack on its way that has an arm guard template and a few others, damn leather taking ages lolol

Also have 2 x roo 1/2 hides coming

If you want, I can ask at archery if any one else needs one. Pretty sure people will....

[threedogs]

getting nervous now with items not arriving
@ HL Ryan Swords do great wall hanger Samurai swords
Mix and match so to speak

[oncedisturbed]

Am in the same boat waiting for stuff

[threedogs]

Yeah one's my Buck tactical folder , pretty sure customs will grab that one,
and x 2 on the digital camo, I'm either tan or drab green, I guy in Strathmoore
has painted his Niva Lada in digital woodlands and it looks pox IMO,
Postie will be here soon fingers crossed

[Gecko17]

For Growler....

Photos of my Hibben Old West Bowie... (Same as 3D's.)

40802

[oncedisturbed]

Very nice, just get home?

[Gecko17]

Very nice, just get home?

Yes mate. Home last night. My cut throat arrived too! Bigger than I expected but a beautifully made piece.

[threedogs]

Nice knife eh HL just be careful putting it back in the sheath.
noticed on mine the point has cut a few different ways it goes in
cause its as sharp as all get out.
I have a huge slab of RED Gum about 4' x 3' think I'll mount my knives on that
there is a slightly smaller version available as well


any thoughts on this tanto
http://www.ebay.com.au/itm/COLD-STEEL-GI-TANTO-CS80PGTK-TACTICAL-COMBAT-FIXED-BLADE-KNIFE-EXPRESS-POST-/281255430752?pt=AU_Hunting&hash=item417c214a60

[Gecko17]

Nice knife eh HL just be careful putting it back in the sheath.
noticed on mine the point has cut a few different ways it goes in
cause its as sharp as all get out.
I have a huge slab of RED Gum about 4' x 3' think I'll mount my knives on that
there is a slightly smaller version available as well


any thoughts on this tanto
http://www.ebay.com.au/itm/COLD-STEEL-GI-TANTO-CS80PGTK-TACTICAL-COMBAT-FIXED-BLADE-KNIFE-EXPRESS-POST-/281255430752?pt=AU_Hunting&hash=item417c214a60

May have to steal your idea if you don't mind 3D... I love the idea of mounting it and I reckon the red gum would be incredible.

I love the tanto... my favorite style blade. I already have a Cold Steel Tanto and it would have to be my favorite knife.

IMHO you can't go past a Cold Steel knife as I've never seen them put out a crap one.

[threedogs]

http://www.ebay.com.au/itm/120985572562?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Found this one , so think it sounds ok.plus it has a "molle "style sheath. I love that molle stuff the amount Ive brought is just wrong
even thinking of buying the rifle bag for across the cargo barrier
As for the redgum a guy was selling a coffee table for $50 all I saw was $250 slab of redgum

[oncedisturbed]

Nice knives, can't complain with the price either.

I need to get another gun bag as well

[threedogs]

Found two gi cold steel oneprice was $80 odd and the othe for the same is $40
@HL http://www.ebay.com.au/itm/Antique-Redgum-Slab-Great-Bar-Top-Sign-Display-Anything-Timber-Top-No-2-/321306483615?pt=AU_Building_Materials&hash=item4acf5bdb9f

[oncedisturbed]

Just bought a cold steel mini tac with kydex sheath, will try post a pic later

[oncedisturbed]

Marking out the scroll work before engraving / cutting the design

[oncedisturbed]

Engraving done and ready for the pyrography kit tomorrow

[threedogs]

Just looking for leather bits and came across this leather makers knife, very doable

http://www.ebay.com.au/itm/LEATHER-WORKING-CRAFTS-CUTTING-TOOL-KNIFE-CUTTER-SKIVING-SHEFFIELD-STEEL-/271366641566?pt=LH_DefaultDomain_0&hash=item3f2eb6579e

[oncedisturbed]

Interesting knife, was going to look at getting a hooked Stanley blade like a lino / carpet knife.

Ordered 2 x roo half hides the other day which hopefully will be in this week and my 10lbs box of leather will be in next week.

If the mail gods are smiling then I should have my mini tac in tomorrow

[threedogs]

Nah the postie has not been kind, getting a little nervous
going to pin the Gil Hibben bowie handle , just to make it different
this is one pattern, or 3 rows fanning out

[oncedisturbed]

Very different pin style

[threedogs]

just received a 2nd chance offer for one of the timber rattler 18" folder. Its a horse
I can get it for $15 plus post
also have an auction finishing in an hour or so for a Golden bone Timber Rattler boning knife
Was sniped on my Khyber bowie but that wont happen this time
Found some nice Molle gun bags, I was going to hang them off the cargo barrier




http://www.ebay.com/itm/Giant-Knife-Huge-Timber-Rattler-Scarab-Lockback-Folder-NEW-/131071628881?pt=Collectible_Knives&hash=item1e847a5651

[oncedisturbed]

Design now burnt and ready to stitch and seal

[threedogs]

Just picked up this TR for $10, happy camper

[oncedisturbed]

Very noice, interesting colour on the scales

[threedogs]

I think its dyed camel bone , I like bone scales and buff would be my favourites.
more an oldtime look.
Did you see the size of that folder
Next time you're free click on Gil hibben knives and
check his 911 with fossil walrus scales
Not for sale made from trade centre steel
trying to get the brass spine for my GH Alamo bowie

Those Gil Hibben Alamo bowies are worth $1550 US.
needs more research as some have brass pommel and others are gold plated.
this could get interesting
http://www.ebay.com.au/itm/120985572562?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
This tanto on another shop says its double edged, IYO would it pass customs

[Gecko17]

@ 3D... I wouldn't see the tanto as a double-edged weapon. Although the top edge tapers up to the back edge, I don't believe that it is sharpened so would love to see how Customs could justify it. If the top edge had been sharpened it may be a different story but I would have thought that the edge would have had to have gone on for a percentage of the blade.

Having said that, I would also say that it depends on the day, the customs officer and their mood.

[threedogs]

yeah ok sick of losing stuff to customs. I've found another tanto diving knife with the molle style sheath
I'm starting to take up diving again, so this will suit as a dual purpose
http://www.ebay.com.au/itm/230846142052?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

did you check the size of that TR folder? 450mm
don't want to take the chance with an $80 knife

[oncedisturbed]

That was a big ar$ed folder. Touchwood I should have my Cold Steel mini tac tomorrow and a CRKT tanto next week

[threedogs]

I'm starting to like the tanto blade now, as a tactical knife not so the Japanese style
and easy enough to put another edge on it, for diving perfect for removing abalone

[oncedisturbed]

Never been a big tanto fan until I saw HL's. More of a "point" fan myself.

Going to order some blanks next week that are about 5 inches in total length, great size for survival belt pouches

[threedogs]

heres what I've found thinking glued and laced up would give a reasonable sheath


http://www.ebay.com.au/itm/271406238638?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
http://www.ebay.com.au/itm/111249221202?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[oncedisturbed]

He is a good seller, have got part of my leather from them.

[threedogs]

yeah finally some knives have arrived, all Columbia.
the large skinner has abalone inserts like the folder.
the bottom one could be used as tactical with its billet scales.
They only came with nylon sheaths, bummer
plus my alloy camp oven arrived, paid a big $30 for it, now that's a bargain
and landed in Aust for under $50

@OD do you use one of these
http://www.ebay.com.au/itm/330982183588?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

[oncedisturbed]

Wood scales came in today, very nice bits and will come up a treat when finished, just waiting on the pins to come.

No mini tac in the post :mad::mad::mad:

[threedogs]

http://www.ebay.com/itm/8Cr-58HRC-Army-Tactical-Rubber-non-slip-survive-Hunting-bowie-Knife-CTV2-FK253-/141185057994?pt=Collectible_Knives&hash=item20df4904ca

Thoughts on this tactical, would prefer ABS molle sheath
Also won an auction for an 18.5 in Khyber bowie for $10 and the seller cancelled the transaction,
un fair I say, ticked right off with that, they should send when they have stock, theives

[oncedisturbed]

Bad form on the auction, not keen on that tactical, doesn't look user friendly.

Got my eye on a nice little 5.7" full tang Boker

[threedogs]

think I'll stick to the Cold Steel GI Tanto tactical

[macca86]

If it had a better hilt it could be a great pig sticker

[threedogs]

You want a sticker check this baby out, cut some conveyor for hilt
http://www.ebay.com/itm/231161545305?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Or this yell out how long you want one ?
http://www.ebay.com/itm/Sharp-katana-17-5mm-Blade-Zytel-Handle-Bowie-knives-Jungle-Hunting-Knife-7FK66-/251451819102?pt=Collectible_Knives&hash=item3a8bb2445e

One more for you

http://www.ebay.com/itm/NEW-13-BOWIE-BAYONET-HUNTING-CAMPING-KNIFE-WITH-NYLON-SHEATH-/231160661921?pt=Collectible_Knives&hash=item35d23fc7a1

@ OD you like or not


http://www.ebay.com/itm/291017262080?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

[threedogs]

@ HL when you get the chance can you measure your gil Hibben bowie, blade length and OA thanks

[oncedisturbed]

Not sure on the brown handled tanto, seems odd.

Did score the little boker and another lil skinner though.
Also bouth 3 blanks that are about 4in total size

[Gecko17]

@ HL when you get the chance can you measure your gil Hibben bowie, blade length and OA thanks

Blade length is 350mm to hilt and 500mm OA. (13 13/16th inches? and 17 11/16th inches OA) Forgive the imperial measurements. Used to the metric system.

That katana you listed 3D as a pig sticker is a Chinese copy of the Cold Steel Magnum Tanto, right down to the Kraton handle and sheath! Will see how it compares.... I just ordered one. :D

[threedogs]

Thanks I thought macca86 wanted a pig sticker, ,turns out my bowie is same as yours a United.
I'm watching some tanto short swords ATM I think one is a Cold Steel,at a good price.
Gotta laugh those are wicked measurements for a "knife"


@ HL These appear to be original plus the steel on those tanto short swords differ some are 440 others are AUS8 or similar

http://www.ebay.com.au/itm/Japanese-Military-Sword-Sharp-Blade-Oxhide-Sheath-/131076688818?pt=Asian_Antiques&hash=item1e84c78bb2
http://www.ebay.com.au/itm/120984746326?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Think Ill get this tactical.

http://www.ebay.com.au/itm/291017262080?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

[oncedisturbed]

Touchwood I get some gear in the post today :)
Just got an email that my 4" knife blanks are in the post

[threedogs]

Nah zip reckon the Buck tactical folder is gone, thieving customs rrrrrrssssssoles

Forgot to get the sharpening stand from Aldis last week that suit my three colour pads

[oncedisturbed]

My 10lbs of leather just came in, some sweet bits all natural veg tanned

[threedogs]

Did some reading up on Roo leather, its tougher because the Roo doesn't have sweat glangs
Dab nabit


Interesting reading


http://stores.ebay.com/Ecop-Police-Supply/Knife-Blade-and-Handle-Chart.html

[oncedisturbed]

Correct on the Roo Leather, some of the best leather you can use. Just started on the1st cross draw sheath.

Just printed that page out to put in my file. I use Ecop quite a bit and is always very good.

My CS mini tac tanto just came in, sweet knife just need to fin the belt bracket to put on the kydex sheath.

MC is playing up again so I can't post any pics

[oncedisturbed]

1st attempt on the cross draw sheath (non molded)

[oncedisturbed]

MC playing up again

[threedogs]

looking good,,,OD when my Buck 25th comes back from the states I'll order a cross sheath.
Just received my "molle" shoulder bag, wow it has places to hold anything and everything , I can now remove all the stuff in my door pockets
and keep them nice and safe in the bag, also ordered a waist one which will more than likely house all camping stuff. I choose tan for the colour.
I still need to get the water bottle molle pouch, UHF molle pouch and the medical pouch as well. I love this stuff no excuse for not having a place for something now,
Keep finding secrect places for holding gear its awesome

[Gecko17]

Where are the pics 3D!! :thumbup:

[threedogs]

got all excited its drab green, There are pockets everywhere plus
also brought a 4 grit sharpening block from Aldis for $9.90

[oncedisturbed]

That looks like 1 of the shoulder bags with velcro belt strap. Mine is slightly different to that 1 and in black

[threedogs]

Yeah this is the shoulder one, still waiting for the waist to arrive ,
then I'll change colour and get a black medic bag, All the stuff in my door pockets and centre console will now
go in these bags, when you add up all the stuff in your patrol just laying around it all mounts up $$$$$$$
GPS, Camera , torches, leatherman. compass etc etc.

[oncedisturbed]

Hahaha I know what you mean.
Have a few belt pouches that can be used on packs, my personal survival pouch is for the belt but my pack is almost finished.

[threedogs]

http://www.ebay.com/itm/130907733836?var=430142422979&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

This mob seemed to be the cheapest with a great range as well

@OD this must be your one

http://www.ebay.com.au/itm/130759063393?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

[oncedisturbed]

Yup that's mine. I get all my molle gear from him.

[threedogs]

http://www.ebay.com.au/itm/Camouflage-Six-Pack-Beer-Soda-Can-Holder-Holster-Camo-Belt-New-/360856241165?pt=LH_DefaultDomain_0&hash=item5404b5440d

@ OD here's something to up your product range. 6 seems a bit large but 4 seems right to me.
Make that out of ox hide with some poker work EG name you'll sell heaps of them,

.Nothing arrived, ticked off, but they are sending another Buck Tactical folder.
I did buy a bottle molle and an alloy drink bottle. wjsh you could see the Jeep molle set up it was on here when I first joined
but as I said I'm a stickler for everything having a box, container, or pouch, I'll try and find a link

[oncedisturbed]

Hahahah true. Have used that seller as well a few times.

Still waiting on some more gear to come through.

Here is a pic of the mini tac and box of leather that came through

[Gecko17]

This is the molle kit that would suit me... more for medical purposes tho...

http://www.ebay.com.au/itm/1000D-Molle-Tactical-3-Ways-Utility-Waist-Shoulder-Handbag-Pouch-Bag-Black/130788999419?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%2 6asc%3D261%26meid%3D5098291487646995187%26pid%3D10 0005%26prg%3D1088%26rk%3D2%26rkt%3D5%26sd%3D130759 063393%26

[Gecko17]

Hahahah true. Have used that seller as well a few times.

Still waiting on some more gear to come through.

Here is a pic of the mini tac and box of leather that came through

That mini tac looks brilliant OD!

[oncedisturbed]

My waist bag is very similar to that 1 HL, not quite as big but it also straps to my pack as well so the wife, muchkin and I can separate items as required.

Need to empty it again and see what I can swap out with other items to minimize weight.

The mini tac is a neck knife so I am trying to find a securex / kydex belt kit for it

[threedogs]

$20 everywhere else I'll put up a link for you
http://www.ebay.com.au/itm/151229716025?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

[oncedisturbed]

My mini dingo knives just got delivered but MC (piece of crap app) keeps crashing so I cant post pics again

TD thats is the same as mine

[threedogs]

Yeah I have it coming but HL is looking at the same molle bag for $46 that's double the price
trying to get to him before he presses buy/add to cart LOL

[Gecko17]

Yeah I have it coming but HL is looking at the same molle bag for $46 that's double the price
trying to get to him before he presses buy/add to cart LOL

LOL... Thanks 3D... Haven't bought it. Have too much medical gear at the mo but good thing is that any I do buy I can claim tax back on it.

[oncedisturbed]

Might have to raid your med gear to stock mine up bwahahahahahaha

[Gecko17]

Might have to raid your med gear to stock mine up bwahahahahahaha

Let me know what you need...

[oncedisturbed]

Trying to get my hands on some hystacril (not sure on spelling) the wound glue.

Here is the mini dingo by Nagatac

[threedogs]

If your after a good steel for home or camp this mob sells some rippers,
they also sell those cast iron knives I have, BTW I sharpened my CI knife properly last night
the MOF is very impressed with it, a weird looking knife and rusts real quick
I think they are for Sushi as they taper from the spine to the cutting edge, so you
can imagine how sharp they are, better than a razor IMO



http://www.ebay.com.au/itm/230946875454?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Again nothing arrived today , bummer

[oncedisturbed]

Just had some tooling leather delivered and the archery pattern pack came in.
Had more in the pack than I thought including patterns for quivers, finger guard, forearm guard, bow case etc

[threedogs]

Best you make your trademark leather hat lol

[oncedisturbed]

Hahahhaa, going to make an arm guard for HL.

Will try make a smaller quiver for munchkin for the costume party next w/end as he is going as robin hood

[threedogs]

sounds like a good plan , robin hood was one of my favourites,
after a cowboy or indian I didn't care. noticed you mentioned you had a forum
is it about survival?? been watching that Canadian guy not as out there as the Bear Grylls

[oncedisturbed]

It's a 4wd, anything outdoors family oriented forum. Haven't started a survival section yet but it is on the cards.

Am going to try and work with an outdoor / survival equipment mob to see if they would like to sponsor us but that will take time.

Robin Hood and King Arthur were / still are 2 if my favourite interests, have something like 60 odd books in both of them.

[threedogs]

I'm word perfect on Camelot. but I grew up on musicals
Camelot my favourite movie, well one of them,

Cheap enough buy and try one , will be sharpest tool in the shed by far

http://www.ebay.com.au/itm/331076567773?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648

Is it true Robin Hood mortally wounded shot an arrow out a tavern window and where it landed was his burial plot???

[Gecko17]

Is it true Robin Hood mortally wounded shot an arrow out a tavern window and where it landed was his burial plot???[/QUOTE]

I'd heard that as well....

[oncedisturbed]

It wasn't from a tavern, it was from a tower keep / nunnery and Little John was tasked to find the arrow, Marian was also placed there according to legend.

The 2 different views were either mortally wounded or poisoned.

Nice kitchen knife

[threedogs]

bought these two today, going to powder coat over the digital camo, why have a knife you cant see , hello unless you are an assassin LOL
That Chinese knife is rough as guts to look at but boy do they take an edge well, you really need to buy one if not just for camp.

http://www.ebay.com.au/itm/130920514698?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
http://www.ebay.com.au/itm/230998826738?var=530162539511&ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

[oncedisturbed]

Will post up pics of the 2 new ones that came in yesterday when I get back from physio.

Not keen on the digi cam.

1 is a CRKT similar to the CS tanto spike and the other an X-Tactical survival fighter curved tanti styled blade.

Still waiting on my Boker and and another Browning to come in as well as my pin rods