Member on hard times parts list

Quote:

---

Originally Posted by Alitis007

I know people that know other people that will paint SPIRIT OF TAS on a leaky barge to smugle him in!!!!

---

that sounds to luxurious for a Tassie maybe just a blow up boat and sum duct tape

Quote:

---

Originally Posted by healy

that sounds to luxurious for a Tassie maybe just a blow up boat and sum duct tape

---

I got an old bath tube that i check tyres for punctures in and we can make paper mashay ors ?? That will work but just have to supply his own drain plug!

I'm serious about the $60

Quote:

---

Originally Posted by Alitis007

Just making a list of the parts we will need and would like to have for our Member on hard times thread. Theres going to be a wish list or goodies list and a need list that i will be updating as we go along.

PLEASE ONLY POST HERE IF YOU HAVE PARTS THAT YOU WILL LIKE TO DONATE OR THAT YOU THINK WILL BE A GOOD IDEA FOR THE GOODIES LIST!!

The car is an 01 GU ZD30 ( Built date 6/2000)

WHAT IS NEEDED
GEARBOX / synchromesh kit (4th gear ) - ordered
Clutch kit - received
Rear main seal OEM - received
Rear diff - donated by 4WD Obsession
Recovery points - donated by Threedogs
Battery - donated by Mudski
Oils : Front diff 80w90 up to 5.4 liters -
Rear diff 140w ( or 85w140) up to 4.7 liters -
Transfer case TX12A ( 75w90) 1.9 liters -
Gear box TX12A (75w90 ) 3.5 liters -
2 X Swivel hub kits and bearings ( bearings felt good but need to look for pitting and metal filings ) - 4WD Obsession
Rear stabilizer bar link rods, long and short ( 2" lift) -
Rags, rags, RAGS!!!! And paper towel - Healy, BA
HTB / High Temp Bearing grease -
Brake fluid ( DOT 4) - 2 X 500ml -Plasnart
CV / Constant velocity grease -
Cable ties, heatshrink, tape and bullet crimp connectors - Winnie
200 odd adhesive backed cable tie mounts, 2000 cable ties and 30m each of 2 sizes of split conduit - Drewboyaus
Climate control with cables - ordered



SAFETY EQUIPMENT
Jack stands - MR 1 set
Trolley jacks - MR 2 x 2000kgs jacks
Wheel chock's -
Safety glasses - MR has Heaps
Gloves ?? Leather and silicon / rubber - MR will bring a box of Nitriles (100)
Hand cleaner ( Good stuff/ Jiff works too) - Alitis007 (i can get some for free but won't be to AB's till late)


WISH / GOODIES LIST
To be revealed - Westy's accessories
Rear work light with mounting stand -
Rock sliders (the ally side steps look fantastic ATM) -
Wheel arch flares and rear bar with moulded flares (sorry mate it looks anorexic lol) -
Spotlights ( who was showing them off the other day ????) -

Tools


Like i said i will add more to this list daily!
Thank you for all your help and support!!
And a big thank you to Bloodyaussie / Jonathan for organizing this special event!!

---

I have 2 stands and trolley jack ill bring the stands jack if needed but 2 jacks should be plenty depends how much support you want under the car

Quote:

---

Originally Posted by healy

I have 2 stands and trolley jack ill bring the stands jack if needed but 2 jacks should be plenty depends how much support you want under the car

---

I'll add them to the list, just tag them sumhow so you know who's is who's

I wouldn't even drink vb if you were shouting me a trip on the queen mary!

FanTapstic!

Quote:

---

Originally Posted by taslucas

I wouldn't even drink vb if you were shouting me a trip on the queen mary!

FanTapstic!

---

don't be like that havnt you watched the adds its the best cold beer

Quote:

---

Originally Posted by taslucas

I wouldn't even drink vb if you were shouting me a trip on the queen mary!

FanTapstic!

---

So your putting the sticker on?? Make the heart shape from a rotor and your coming to Andy's!!!!!!!

Quote:

---

Originally Posted by Alitis007

So your putting the sticker on?? Make the heart shape from a rotor and your coming to Andy's!!!!!!!

---

That is a very generous offer mate but I've got a bit on for a few weeks. One day I'll make it up. Maybe just fly over and ride shot gun with one of you clowns;-)

FanTapstic!

If you are talking clowns then you must be talking about Winnie!!!!

Quote:

---

Originally Posted by Bloodyaussie

If you are talking clowns then you must be talking about Winnie!!!!

---

Yes indeedy!

If you're happy and you know it tap a post!

Quote:

---

Originally Posted by Bloodyaussie

If you are talking clowns then you must be talking about Winnie!!!!

---

Well he is the only one nice enough to offer his passenger seat but as things stand, it sounds like he has a spare trol for me!

FanTapstic!

Yep and he wont mind if you wheel stand it on two wheels up rocky ledges!!!!!!!!

Quote:

---

Originally Posted by Bloodyaussie

Yep and he wont mind if you wheel stand it on two wheels up rocky ledges!!!!!!!!

---

I hear it's got a thumping sound system too;-)

FanTapstic!

Welder bloke I use just picked up the front bar and it will be ready tomorrow all fixed!!!!

O.k I have 10 metres of 7core 4mm wire, Deep cycle coming next week and a pair of earings to finish of the troll when its all done....Bolts , I forgot the bolts dammit! Must remember them for next week. Plus any confirmation on a welder? Will need one to make up the mounting plates for the recovery point.
Actually. George! OR Jonathan. While the bar is off if you have time, get that other plate on. Otherwise we'll just rip off the bar again at Andy's...
No biggie really.

We have had no reply from John on the recovery points so dont know whats going on??

As stated my arc is huge and may be overkill???

I've got a small gas less welder here it will do the job but I don't know how to weld

Do you want a can of Hand Cleaner ??????

Quote:

---

Originally Posted by taslucas

Well he is the only one nice enough to offer his passenger seat

---

Awwww how sweet, you two make a great couple!! I now know why your busy........... Your planning your wedding with Chris lol

No dramas mate, next time it is!!!

Quote:

---

Originally Posted by mudski

O.k I have 10 metres of 7core 4mm wire, Deep cycle coming next week and a pair of earings to finish of the troll when its all done....Bolts , I forgot the bolts dammit! Must remember them for next week. Plus any confirmation on a welder? Will need one to make up the mounting plates for the recovery point.

Actually. George! OR Jonathan. While the bar is off if you have time, get that other plate on. Otherwise we'll just rip off the bar again at Andy's...
No biggie really.

---

Yeh i can make one no dramas just need the nuts to weld to the plate that way will save someone carting a welder!

Quote:

---

Originally Posted by Bob

Do you want a can of Hand Cleaner ??????

---

Might aswell bring it i was going to bring some but i'm not sure what time i will get to Andy's

Quote:

---

Originally Posted by Alitis007

Yeh i can make one no dramas just need the nuts to weld to the plate that way will save someone carting a welder!

---

By memory its 3/4 sized bolts. So, 3/4UNF x about 1 1/2inch long would suffice. I have a small Cig Weld Arc welder I can bring to andy's if need...If its going to get done there that is.

Quote:

---

Originally Posted by Bob

Do you want a can of Hand Cleaner ??????

---

Ba and mudski might need it tho from the sound of things

Quote:

---

Originally Posted by mudski

By memory its 3/4 sized bolts. So, 3/4UNF x about 1 1/2inch long would suffice. I have a small Cig Weld Arc welder I can bring to andy's if need...If its going to get done there that is.

---

I have to go and get a bunch of high tensile bolts for the front bar as they are rooted and I was going to raid my donor GQ for heaps of nuts and bolts and clips and so on???

Quote:

---

Originally Posted by healy

Ba and mudski might need it tho from the sound of things

---

Like I said mate. No Spoon for him!!! It will be me, myself and a bottle of lotion for the noight!!!! Oops!

Get back on topic you idiots!!!!!!

I have a huge bag of rags also and 3 tubs of hand cleaner and do I need to bring my big compressor and rattle gun??

Quote:

---

Originally Posted by Bloodyaussie

Get back on topic you idiots!!!!!!

I have a huge bag of rags also and 3 tubs of hand cleaner and do I need to bring my big compressor and rattle gun??

---

talk ya self up mate big compressor ha

Oiii lady's !!!! Settle down!!

The bolts we need are M14X 1.5 - 30mm long, they will do the bar Jonathan make sure you get zinc coated ones also spring washers and 3 Nuts for the recovery point.

Mark imperial is no good, you wanna stick to metric just incase the bolts get mixed up they're all the same thread!!!!

I'm going to check the Friction disc of the clutch suits the box now and check the condition of the oil too before i leave work !!!!!!!

I hate imperial...... the metric system rules..

Yes Healy a big compressor.......???

Also should I bring Peters engine crane??? actually I think I should as I lifted the front bar today without a winch in it and it was bloody heavy.

Peter and I have fitted a few front bars with winches and it has made it a breeze..!!!

Quote:

---

Originally Posted by Bloodyaussie

I hate imperial...... the metric system rules..

Yes Healy a big compressor.......???

Also should I bring Peters engine crane??? actually I think I should as I lifted the front bar today without a winch in it and it was bloody heavy.

Peter and I have fitted a few front bars with winches and it has made it a breeze..!!!

---

There will be 50 odd blokes there I'm sure we could lift a bar.


If you're happy and you know it tap a post!

Quote:

---

Originally Posted by Bloodyaussie

I hate imperial...... the metric system rules..

Yes Healy a big compressor.......???

Also should I bring Peters engine crane??? actually I think I should as I lifted the front bar today without a winch in it and it was bloody heavy.

Peter and I have fitted a few front bars with winches and it has made it a breeze..!!!

---

you could but a bloke on each end and one guiding the middle will cut it

Quote:

---

Originally Posted by Alitis007

Oiii lady's !!!! Settle down!!

The bolts we need are M14X 1.5 - 30mm long, they will do the bar Jonathan make sure you get zinc coated ones also spring washers and 3 Nuts for the recovery point.

Mark imperial is no good, you wanna stick to metric just incase the bolts get mixed up they're all the same thread!!!!

I'm going to check the Friction disc of the clutch suits the box now and check the condition of the oil too before i leave work !!!!!!!

---

is that high tensile?? just the way I go with stuff like that

Quote:

---

Originally Posted by healy

is that high tensile?? just the way I go with stuff like that

---

Yes mate those 8.8 ones zinc coated.

BTW i don't think the box has oil in it FFS !!!!!

I thought high tensile was no good for bullbars as they will shear easier?????

Quote:

---

Originally Posted by Alitis007

Yes mate those 8.8 ones zinc coated.

BTW i don't think the box has oil in it FFS !!!!!

---

oil is over rated mate trying to make it lighter for the hill climbs

Quote:

---

Originally Posted by Winnie

I thought high tensile was no good for bullbars as they will shear easier?????

---

really?? ive always changed out bolts like that for high tensile never had a drama can someone confirm this for me

Quote:

---

Originally Posted by Alitis007

Yes mate those 8.8 ones zinc coated.

BTW i don't think the box has oil in it FFS !!!!!

---

hey mate when its up in the air where the sump protector goes (in my garage) if you have any spare bolts around can you size it up theres 4 holes on the rails but only two have nuts in side no dramas if you cant

Home time yayyy!!

Ther was only a couple if 100 ml in it but was a nice golden syrup color but didn't taste that nice lol

Quote:

---

Originally Posted by healy

oil is over rated mate trying to make it lighter for the hill climbs

---

How do you like convertibles ???? I can borrow a demo saw, it'll be engineered!!

Quote:

---

Originally Posted by healy

hey mate when its up in the air where the sump protector goes (in my garage) if you have any spare bolts around can you size it up theres 4 holes on the rails but only two have nuts in side no dramas if you cant

---

Bring it i'll work something out

Quote:

---

Originally Posted by Alitis007

Oiii lady's !!!! Settle down!!

The bolts we need are M14X 1.5 - 30mm long, they will do the bar Jonathan make sure you get zinc coated ones also spring washers and 3 Nuts for the recovery point.

Mark imperial is no good, you wanna stick to metric just incase the bolts get mixed up they're all the same thread!!!!

I'm going to check the Friction disc of the clutch suits the box now and check the condition of the oil too before i leave work !!!!!!!

---

Meh! Metric sux. I'm old school. Anyhow, just need whatever fits. As for the bar, you only need one person to remove and refit. Two if there is another handy.

Does this look right healy?? Attachment 27509