Merged - Deleted "Wanted"

[Dingo55]

CLOSED - FOUND ONE

Wanted - 1 x alloy rim for GU 2006-2012, in good or better condition, 17x8

See pic.....

cheers

CLOSED - FOUND ONE

[purplebus]

i have a couple of elec fans here at glass house mountains if that helps. the fans in front are for the air con but i have fitted engine fans in front before using zippie ties or you can buy a kit to fit them from car bitz etc for about $30 from memory. i have a few sizes from memory.

[Radmobile]

Send me a message or call on 0407582008

Can organise freight etc.


Tony - mildura

Cheers!

[num_301]

As post states I'm looking for a stock 4.2td intercooler and if possible bonnet.
Thought as heaps of people upgrade these that there might be some stock ones lying around.

Cheers scott

[nissannewby]

I could have one it will give me the excuse to pull my finger out and upgrade mine.

[num_301]

Sweet. When do you think you will be upgrading?
I'll pm you

[n_1ck26]

Wanted
gu 4.2td
either ute or wagon
paying cash
let me know what you have
please sms nick 0433 759 477
located in vic

[luvpsi]

hey guys im after a set of extractors for td42 GQ in perth if anyone is looking to sell some let me know

[89gqpatrol4x4]

Hey mate, I'm in ipswich and have the dickie seats if your still keen

[89gqpatrol4x4]

hey guys, if anyone has a steel winch bar for a GQ and wants to let it go please let me know. and i,m in the bisbane area

[taslucas]

Get one for me too!

Ive been looking for a while..... Not much on fleabay or the tree...

Goodluck.

[69darocket]

hey all, just chasing a set of door locks for all 3 doors and fuel panel lock, aswell as a ignition barrel for a 92 tb42. wanted in very good condition. my mobile is 0427521456 or you can pm me

thanks

rod white

[89gqpatrol4x4]

Tell me about it!!!

[mudmav]

Hi i live near wangaratta and am restoring a maverick , its my first 4x4 and i am learning heaps and making mistakes heaps but having fun on the way .
i am in need of the following parts if anyone can help me out please include prices and the area you live in so i can think about freight /postage etc.

drivers side door trim what i have is grey in colour but if price is low not fussed .
couple of window winder handles, with geez clips again colour not fazed by.
passenger side front glass, rear winding regulator, so left side for both
front sway bar complete with all bolts and brackets .
rear right side stop/tail light assembly plug in type , goes into quarter panel .
bullbar or bumper bar ,old shitty steel one is fine to keep price down .
fan for radiator.
left side door mirror .
rear sliding window seals both sides .
window washer bottle ok one motor cactus one motor leaking.
snorkle and airfilter cover is duel fuel .
under body gas tank in date .


not much eh , well start at the top and ive been working my way through thanking anyone who replys in advance i will leave my e-mail address below and mobile no but coverage out here is unreliable .


rosicka@exemail.com.au


thanks robert

[mudmav]

brother in law has a set of schmick nick rear and dickies for sale but down south as well , look out as subtle difference in locking mechanism were told between some of them were as they will pretty much all bolt in the same holes if you lay them down the locking latches may be different .

robert

[Bigrig]

Hey Guys,

Im looking for a set of rear dickie seats in the Brisbane area. Let me know if you can help out.

Cheers Adam

Hmmm ... needing rear seats ... something your not telling us Adam?? Are we expecting the sound of quintuplets soon??? lmao

[GQPorkroll]

I'm in Cessnock, NSW near Newcastle. Willing to pay freight if you can box it up.

I need the small, left hand side rear door preferred in white but any colour will do.

Also looking for a drawer system. Needs to have provisions for baby seats. 2/4 drawers is enough, don't need an area for a fridge as I will mount one on top of the drawers.

May also be interested in a steel tubular winch bar comp type if its the right price.

[GQPorkroll]

Add to that a full length roof basket. Bought a piece of shit one off eBay that was meant to be 'full size' and suit a GQ-U Patrol but its 160cm long and is at least 200mm too narrow to fit onto the Patrol.

[cliff]

Hey Robert,

I'm just throwing some ideas out there for you, as I am a bit of a tightarse and have done the things I'm suggesting to you.

Door trim - recover the trim yourself, buy what ever material you want, in whatever colour you want. Just get some sikaflex and some staples and hit google.

Window winders (with clips) - http://www.ebay.com.au/itm/NISSAN-PATROL-GQ-89-97-WINDOW-WINDER-SET-GREY-/160742166062?pt=LH_DefaultDomain_15&hash=item256cface2e

Snorkle - http://tigerz11.com.au/products/Nissan-Patrol-GQ-%7B47%7D-FORD-MAVERICK-1988-to-1997.html

Mirror - http://www.ebay.com.au/itm/LH-Skin-Mount-Door-Mirror-Nissan-Patrol-GQ-Ford-Maverick-Manual-Black-/270933387135?pt=AU_Car_Parts_Accessories&hash=item3f14e3677f

eBay is the place to get everything you need, and its almost always cheaper and delivered. Other than that give patrolapart a call, and there is a jap wrecker in wondonga to I think.

I hope some of this has helped.

Cheers,
Rich

[Warnie]

Nah scotty, the family is coming up in July and I will need an extra seat, that's all. No kids yet mate.

89gqpatrol4x4 yeah I'm still keen mate, how much do you want for them?

[Clunk]

Hmmm ... needing rear seats ... something your not telling us Adam?? Are we expecting the sound of quintuplets soon??? lmao

Specially after givin his misses that cubic zirconia engagement ring lol

Taps a lot!!!!!!

[MQ MAD]

Are you after a 4 speed or a 5 speed tailshaft ???
Is it for petrol or diesel ???

There are many different lengths

[mudmav]

all the world loves a tighty Wodonga was actually my next port of call but when i seen this thred i had to try will look at those sites you mentioned as well have found some bits and pieces like front sway bar 25 bucks complets brackets nuts bolts etc rear tail light free has a crack dont know if that will pass roadworthy but i can put resin in the crack which may make it invisable who knows its window glass and winder causing most grief but youve helped so much a big thank you for your help

robert




Hey Robert,

I'm just throwing some ideas out there for you, as I am a bit of a tightarse and have done the things I'm suggesting to you.

Door trim - recover the trim yourself, buy what ever material you want, in whatever colour you want. Just get some sikaflex and some staples and hit google.

Window winders (with clips) - http://www.ebay.com.au/itm/NISSAN-PATROL-GQ-89-97-WINDOW-WINDER-SET-GREY-/160742166062?pt=LH_DefaultDomain_15&hash=item256cface2e

Snorkle - http://tigerz11.com.au/products/Nissan-Patrol-GQ-%7B47%7D-FORD-MAVERICK-1988-to-1997.html

Mirror - http://www.ebay.com.au/itm/LH-Skin-Mount-Door-Mirror-Nissan-Patrol-GQ-Ford-Maverick-Manual-Black-/270933387135?pt=AU_Car_Parts_Accessories&hash=item3f14e3677f

eBay is the place to get everything you need, and its almost always cheaper and delivered. Other than that give patrolapart a call, and there is a jap wrecker in wondonga to I think.

I hope some of this has helped.

Cheers,
Rich

[Bad-Trol]

Looking for a tank to replace aux fuel tank on GU patrol. Want something that holds fuel & water.
Cheers

[Warnie]

You know it clunk, nah no ring either. I haven't had to fork out that $30 yet, its gonna hurt the bank when it finally happens lol

[Clunk]

You know it clunk, nah no ring either. I haven't had to fork out that $30 yet, its gonna hurt the bank when it finally happens lol

Yeah tell me about it, almost killed me, even had the debt collectors on me back for missing a couple of monthly repayments hahaha

Taps a lot!!!!!!

[89gqpatrol4x4]

sorry warnie, but a mate has taken them off me.

[bordertech]

I'm after five 17" x 8" alloy rims to suit a GU.

Please PM me or ring me on 0400 250 734 if you have some or know of some for sale.

I'm in south east SA so the closer the better :cheers:

Dave

[DirtyDattos]

Gday all just asking around for any old G60 utes or Wagont that may be for Sale,Lookign for old Retired/Rough one for parts ect ,let me know cheers

[Finly Owner]

Is Nissbits in Vic?

MQ Mad May post you one!


Tim

[patto826]

Hi I have a 99 GU 2.8 turbo diesel chasing a mechanic in Darwin to replace the timing belt, would prefer a cashie on a weekend if anybody knows anybody please let me know!
Thanks
Ben

[Killametre]

Got a set in Townsville They are Dirty out of the 89GQ i am wrecking $50 for my time to remove em and ther yours you just have to get em south

[Decthebeast]

Does anyone have any parts for an 83 MQ ute? Something like doors, windscreen, free-running hubs, etc.
around the sunshine coast/Brisbane region. would be mighty helpful.
cheers, Dec

[Finly Owner]

I can help with some hubs.


Tim

[Moorey86]

Umm 4.2's dont have a chip... Its mechanical injection... And they didnt make a 2007 patrol with a 4.2 in it... Sorry

[Dingo55]

Hi bordertech, feel like a drive to Kilsyth? It's in east Melbourne, not too far from Boardertown. http://www.ebay.com.au/itm/Nissan-GU-Patrol-17x8-Alloy-Rim-wheel-1-/230789296993?pt=AU_Car_Parts_Accessories&hash=item35bc1d3361

Just the rims, no rubber. Probably asking a bit much, normally they go for around $240 or so each on this site, but if you're after the 5 then he says he's willing to negotiate. Says centre caps, but doesn't say if wheel nuts & safety indicators are included. Have you tried Nizzbits? I heard he might be able to do them for about $300 each with the 5th one free, but you'd have to check with him.

cheers,

[bordertech]

Hi bordertech, feel like a drive to Kilsyth? It's in east Melbourne, not too far from Boardertown. http://www.ebay.com.au/itm/Nissan-GU-Patrol-17x8-Alloy-Rim-wheel-1-/230789296993?pt=AU_Car_Parts_Accessories&hash=item35bc1d3361

Just the rims, no rubber. Probably asking a bit much, normally they go for around $240 or so each on this site, but if you're after the 5 then he says he's willing to negotiate. Says centre caps, but doesn't say if wheel nuts & safety indicators are included. Have you tried Nizzbits? I heard he might be able to do them for about $300 each with the 5th one free, but you'd have to check with him.

cheers,Yeah heard about nissbits ones. Can you pm me when you know a total price please? I know where Kilsyth is.
Cheers.

[bordertech]

BYW dpes anyone know the load rating of the GU 17" alloys?
Cheers

[macca]

Can you get a set from Old Bar in NSW to Bordertown?

If you can get a cheapy of freeby deal we might be able to do some business.

I've got 1 that has not been on the road and 4 with 50% tread OEM Tyres.

4 Caps, no nuts or indicators.

1 rim has a gutter rash small but still there.

Would want $1250 though.

Cheers Macca

[nissannewby]

I think there were a lucky minority that got the 4.2 in 07 but as said no chip.

[MudRunnerTD]

Umm 4.2's dont have a chip... Its mechanical injection... And they didnt make a 2007 patrol with a 4.2 in it... Sorry


Hey mate how about heading over to the intro section and say g'day before posting comment or questions. I'd appreciate it.

Also note. PNGPatroling is in Papua New Guinea and has a Japanese import without Australian ADR restrictions. He Indeed DOES have a 2007 TD42 non intercooled GUIV.... Hell Yeah!

See ya learn something every day! Welcome to the forum.

[MudRunnerTD]

Banjo, good luck with your search for the intercooler. If you can't find a second hand one think about fitting up a front mounted one. I would be fairly easy, plenty of room and readily available pretty cheap. Oh, and Much bigger than the Nissan job.

[cookpa]

Wanted an air fllter box for a GU ZD30 motor , bare no extras
thanks

[PattyWgnOwen]

Still looking

[PattyWgnOwen]

There is one on eBay ATM

[PattyWgnOwen]

There is one for sale on patrol4x4 forum. Just went up?

[PattyWgnOwen]

If you get rid of your muffler you can fit a water tank in that side which is better balanced and does not need engineering.

[Warnie]

Thanks for the offer man, but cant get them down here. Ill just keep looking, I don't need them for another 2 months.

[my third 256]

thanks mate - the factory GU td42 has a hand throttle from factory - looking to use original parts if I can to keep it easy. I think I need a td42 pedal also because I can't see where my ex-zd30 pedal has any point to mount the extra cable.
the knob is for idle up on a cold mornings not a hand throtle and shouldnt be used as a hand throtle as there is no quick release in the case of an emergency

[Rick111]

Hi all, I'm chassing a set of Sidesteps & Brushbars to suit 2001 Series 3 GU Patrol Wagon. If I can buy them at the right price I'll do that rather than making my own. I know I'm a bit lazy, but it's worth a try. PM me if you've got some for sale.

Cheers,
Rick.

Thank's guys, not needed any more, bought some new.

[PattyWgnOwen]

Correct. That is why I want it. Car has a remote start function which fumbles on cold mornings. My apologies for using the wrong terminology.


---
I am here: http://tapatalk.com/map.php?yfbeks

[97_gq_lwb]

does the gq one fit

[Bj70]

G'day everyone, I'm in search of a standard garrett turbo off a 3ltr GU.

I'm located in Brisbane but willing to pay for postage.

Cheers

[PattyWgnOwen]

I don't have access to a GQ to see what it looks like. If you can email me a photo? Owen@eastcoastbuildingdesign.com.au

[Morton]

thanks for that, I got it on watch now, he wants a bit much for it ($400) but I will call him after it finishes, I doubt it will go & good luck to him if it does

[robbo0001]

Mate I have the rear corners, the alloy rear step and the two inner corner brackets off our 99 2.8 GU? The lights still function, however I cut the loom to use the plugs on the steel bar, so a bit of easy rewiring is required. The corners are gold/silver colour
Will these suit your needs?....currently sitting in my shed annoying me, in North Brisbane.

[Dingo55]

Morton,

I've got one off my '06 GU IV after fitting a kaymar bar but don't know if it will fit your trol. It's gold, has the inner steel mounting frame, with mounting blots, no lights, in good nick, $200 Brissy.

cheers

[PattyWgnOwen]

The tail lights rear qtr and flares all different. I would not think it will fit.

[Bad-Trol]

Thanks for that, but as I JUST put in a new Stainless Steel exhaust last week, I don't think I'm prepared to remove it just yet. But I hear what you're saying, thanks for the advice

[Dingo55]

Patty, I measured a '03 & '06 GU today both STs. The rear qtr & flares are the same, the distance of the flares & tail lights from the top of the bumper is the same. The bottom of the tail lights on the '03 & '06 start at the same place on each body but the '06 lights extend higher on the rear qtr panel. Only difference is the full plastic bumber covers the center break away U bolt - won't call it a tow or recovery point because it's not. If you fit an '04 or newer plastic bumper on an '03 or earlier, then you would need to fit the extension piece in the centre of the rear subframe, otherwise you won't be able to bolt on that break-away U bolt. Have a look at the attached pdf, page 2 & look for that additional piece - part # 51132. Morton's trol won't have that part. I think it was introduced from '04 onwards.

cheers

[GQ TANK]

The gq windscreens are the same - I paid $300 for a new windscreen & rubber fitted in melbourne

[macca]

Sold them on ebay last night
Macca

[simdogs]

Looking for a set of set of side steps for a GQ ute.

I missed the end of an auction on ebay the other day so thought I'd see if anyone's got any here

Cheers
Simon

[GQPorkroll]

I sold an aftermarket Nice unit brand new the other day to a mechanic for $165 had everything included besides the fuel door. I reckon you'd be paying that much second hand. The RRP was only about $180

[nissannewby]

Yeah i bought a set new for my ute for 130

[moo_r32]

as tittle says

WTB: TB42 motor can be bare, and also a turbo exhaust manifold to suit a TD42 in adelaide

shoot me an sms on 0405 248 218

thanks mark.

[PattyWgnOwen]

Would still be cheaper to alt the exhaust compared to a custom fuel tank? Off the shelf is always better?

[Bad-Trol]

I hear ya! I know Long Ranger makes split tanks for the Toyota's, but haven't found anything for the Trol... Hoping I can find something like that to replace the aux.

[Boagie]

Hey guys,has anyone got a gu workshop manual? 98-04 ? gregorys preferred?will pay up to $35 +postage....THANKS:animierte-smilies-f

[NissanGQ4.2]

Why don't you download the one available in the manual section or is it 2 keep in the 4B?

I'm pretty sure the manuals here cover that year range, but could be wrong

Cheers

Todd

[MudRunnerTD]

Yeah hey Boagie, the Manuals available for download here certainly cover your year mate and are way way more comprehensive that the Gregories stuff. Just print the pages you need when you need them

[bushytas]

Im looking for

2X rear dickie seat roof grad handles
1X front interior light with map lights
1x left sun visor with mirror

Beige colour 2007 or 2008

[town n country]

Hey Simon, I sent a quick message to you, not sure if it went through, I have a set of GQ sidesteps in Ipswich area, Dave. 0418114523.

[97_gq_lwb]

http://www.ebay.com.au/itm/Nissan-GQ-Patrol-Side-Steps-And-Brush-Bars-/270983639614?pt=AU_Car_Parts_Accessories&hash=item3f17e2323e

[Boagie]

Cheers guys,but i like manuals when i am crawling around on the old girl, that and i dont have a printer!!!!

[Clunk]

Had a look on eBay mate?

Taps a lot!!!!!!

[ablast]

Super Cheap Auto Parts sell the full range of manuals and are generally easy to find.

[MQ MAD]

Does anyone have any parts for an 83 MQ ute? Something like doors, windscreen, free-running hubs, etc.
around the sunshine coast/Brisbane region. would be mighty helpful.
cheers, Dec

Doors are all the same in the MQ/MK range, even GQ ones will fit, if ya dont like the 1/4 windows
Windscreen from any MQ/MK/GQ will do , the dearest part will be a new windscreen rubber
Tim (finly ) can help with hubs, i dont sell seperate,only complete diffs, hub to hub
IF Tim , doesnt have anything else your chasin , shoot me a PM with a complete list, theres heaps of gear here
Tim , was first , he must have finished in the shed first, oh well , ill keep hiding beers in the shed tho.....

[simdogs]

Thanks Dave but a little to far away for me. Cheers

[DX grunt]

Thanks Dave but a little to far away for me. Cheers

Where do you live?

[simdogs]

Southern NSW at the moment but also spend some time in Vic

[coreysgu]

:bananadancing:Chasing a steel winch bar, brush bars and a set of side steps for my gu. Not bothered if they need painting as im a powdercoater and can do so myself. Thought i would try my luck on here before buying new at store next week. :trink13:

[WayneUH-1]

Hi Guys,
I'm looking for a second hand off road trailer. Prefer single axel and the wheels to have same stud pattern as a GQ Patrol. I'm located on central coast NSW. Thanks.

[BUZNBI]

Hi guys I am after a td42 bell housing if anyone can help
Thanks George

[growler2058]

G'day George welcome aboard mate. Jump over to the intros and say g'day mate something we ask all members to do cheers


Tapp tillya Crap

[megatexture]

you will probably have more luck/options if you just look for a solid trailer then do axel swap to axel under leaf for more clearance and if need be change the hubs to a gq pattern, if hubs need changing while you’re at it chuck in some electric brakes if you plan on doing real 4x4 with it you will want them anyway. i fitted my brakes 10" hubs for around 300$ (already had the in cab brake controler).

[Richo460]

If anyone has a GQ dash sitting around i amlooking for one. If its not working i will still consider it. So many patrols get wrecked yet these seem to be hard to get.
Cheers

[Bob]

Yeah i have one. Speedo not working. You can have for the cost of postage

[Richo460]

:smiley_thumbs_up: awesome. your a legend! PM me with details. Postage will be to 4868.

[Bob]

Pm sent.

You are lucky as i nearly binned it last weekend when i was clearing out my shed.

[coreysgu]

purchased all new

[Timmo]

hi guys any one in perth that has any rubber matting or conveyer belt i can make some mud flaps with?

[Sir Roofy]

hi guys any one in perth that has any rubber matting or conveyer belt i can make some mud flaps with?

cant help there but id use the conveyer belt

[Brendan56]

I've got some over the other side of australia. haha.

[NissanGQ4.2]

Timbo, don't you have any mining sites near your way??? probably would have a shipload of old conveyor belt laying around and doubt they would charge u for a few meters of it

[Clunk]

Have you had a look at what clark rubber might have?

[Sir Roofy]

have a look at the local quarrys they would have a bit of belt laying about

[Woof]

I will see what I can do for you mate.

[Morton]

Dingo thanks for that but the bar is different & would require painting if I can fit it

[Morton]

Robbo, can you please PM me ur number, I have a Brother that lives at Caboolture, I would like to take that of you hands, wiring doesnt bother me, if it is straight forward I can do it, anything after that I will blow something up.

[NissanGQ4.2]

Robbo, can you please PM me ur number, I have a Brother that lives at Caboolture, I would like to take that of you hands, wiring doesnt bother me, if it is straight forward I can do it, anything after that I will blow something up.

Morton, I have removed your mobile number, feel free to put it back on, just be aware anyone on the net can view it not just forum members.

The best thing to do is send Dave ( robbo0001 ) a personal message giving him your number or requesting his number. With a personal message he will get the PM in email form more likely well before he reads this thread.

Cheers

Todd

[macca86]

why buy a new bumper when you can do a quarter cut and custom tube bar now. When ever I break something on the patrol I say to the missus now we need to upgrade this and that so it doesn't happen again so it saves cash in the long run!

[Richo460]

Conveyer belt, what a great idea, plenty of it goes to waste. Heavy as hell, bulletproof and should be free. Any mine would be happy to get rid of some second hand stuff. We have crap loads of old stuff here, but its a little far away.

[Morton]

thanks Todd, I will remember that for future reference

[Morton]

why buy a new bumper when you can do a quarter cut and custom tube bar now. When ever I break something on the patrol I say to the missus now we need to upgrade this and that so it doesn't happen again so it saves cash in the long run!

Macca, I have done that on my GQ, the rear has been cut & custom tube fitted for a rear bumper

[NissanGQ4.2]

Hi Guys n Girls,

If anyone has or knows anyone with an old BFG A/T lying around that is know longer needed with at least 50% tread still on it, can you PM or reply here with a price.

Cheers

Todd

[MudRunnerTD]

Hey Dude! there is a bloke selling a BFG MTin the For Sale section that might suit you. I think he is in your area too! could work out. Give him a bell ;)

[NissanGQ4.2]

Hey Dude! there is a bloke selling a BFG MTin the For Sale section that might suit you. I think he is in your area too! could work out. Give him a bell ;)

Thanks Darren,

I just gave him a bell, got an email back from him kinda like that ebay scam that AB posted.

Sounds like a very dodgy bloke 2 me

Was going 2 offer him my M/T's for his M/T's even though I was really after an A/T's

*LMAO*

[Woof]

Should have some for you next week Timbo, if you don't hear from me just send a PM...............................I tend to forget things sometimes..LOL

[NissanGQ4.2]

I tend to forget things sometimes..LOL

That's what happens when you get old *L*

[Woof]

That's what happens when you get old *L*

Good on you Todd, I knew that reply was coming mate..LOL

[Timmo]

Cheers Doggy will send you a pm...........

[knightpatrol66]

Hey all
Am looking for an Airbox setup to suit TB42 with LPG...If anyone can help...much appreciated.
Am happy to have an original Airbox converted too

[Michelle]

Hi Im on the hunt for some GQ front doors to fit on to my MQ with min rust, dints are ok, needs to be cheap and close to Horsham Vic Cheers Michelle

[White Elephant]

http://www.nissanpatrol.com.au/forums/showthread.php?11818-GQ-parts-available-in-Perth

You could try this guy? Not too sure what he has got mate.

[PattyWgnOwen]

anyone have any factory nissan td42 four bolt engine mounts laying around?
pm or google "east coast building design - brisbane" and email me directly.
Owen.

[Michelle]

Bendigo, Swan Hill, Ballarat around those towns are good too?? Also need mirrers, can be posted at my cost

[Toha]

Hi looking for set of 4 mud flaps to buy... if anyone wana selll plz pm me thanks

[Woof]

Hey Timbo, just picked up about 5m of conveyor belt mate, all yours

[simdogs]

Hi All,

Looking for an interior door handle for the front passenger side door.
Don't think there's any difference between driver or passenger side so either should do (or correct me if wrong)? And it's for a ute if their different to wagons.

Just after the handle, not the locking mechanism.

Also saw somewhere that a guy used VL door handles so if no luck with GQ handles I might hunt for them.

[cliff]

http://www.ebay.com.au/itm/Black-RALLY-Mud-Flaps-Splash-Guards-NISSAN-PATHFINDER-PATROL-/200760892887?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2ebe481dd7

or

http://www.ebay.com.au/itm/universal-4x4-heavy-duty-mudflaps-pair-new-28-5-x-47-5-/290581920644?pt=AU_Car_Parts_Accessories&hash=item43a8083b84

or

http://www.ebay.com.au/sch/i.html?_nkw=4x4+mud+flaps&_sacat=0&_dmpt=AU_Car_Parts_Accessories&_odkw=patrol+mud+flaps&_osacat=0&_trksid=p3286.c0.m270.l1313

enjoy trolling!!

[iansmqshotyy]

i have a whole mk wagon im pulling apart, in hervey bay..

[knightpatrol66]

PART FOUND THANKS ALL SORTED

Hey all
Am chasing a Passenger Side Front Seat Belt for a 91 Patrol/Mav in Grey. Mine just failed RWC for the smallest of nicks , so need one in unmarked condition, thanks in advance. Oh yeah i'm in WA ;)

[08st]

I'am after a spare tyre for the GU, size is 285/70/17 Thanks.

[finbar]

I have a steel tray with steel drop sides , alum tube frame with canvas cover, alum roof rack and built in awning setup.

[Clunk]

Check your local free adds, subtree and eBay. They come all the time.

[my third 256]

you will get more respone from the members if you put up an introduction mate here is the link
http://www.nissanpatrol.com.au/forums/forumdisplay.php?2-Introductions
where are you located /

[Lieney]

08st.
Please put up an intro.
I'm in SA and have what you need

[Finly Owner]

Been no response to our offers fellers.....................



Tim

[my third 256]

08st.
Please put up an intro.
I'm in SA and have what you need
how much you want for the tyre and how many you got / condition also please
im interested

[Micktroll]

Chasing either a winch compatible steel bullbar

Or

Winchbar

Or

A combo of bullbar with winch.

Thanks guys :D

[simdogs]

Found this bar in Cedar Grove, not sure how close that is to you but also a WArn Winch for sale there as well

http://www.gumtree.com.au/s-ad/cedar-grove/other-parts-accessories/nissan-gq-patrol-custom-winch-bar-suit-high-or-low-mount-winch/1002912692

http://www.gumtree.com.au/s-ad/greenbank/other-parts-accessories/warn-xd9000-winch/1001791312

and this one in similar area

http://www.gumtree.com.au/s-ad/upper-coomera/other-parts-accessories/nissan-winch-bar/1002004579

[PattyWgnOwen]

08st
it is going to help members if we know where you are on this big brown island?
Owen.

[PattyWgnOwen]

i am in pine rivers area - I have a non-winch bar that you can modify if you have access to a welder and steel.
The GQ mounts are very simple, and there would be very little work to make it fit?

[my third 256]

yes you are absolutly right in their profile why not let us know where you are from / what is the big secret ?????????????????????????????????????????????????? ???????????

[Michelle]

Still looking lol

[Bloodyaussie]

I am after an absence of mood swings and a million dollars.. thanks in advance!!!

[Micktroll]

cheers guys :)

the welder could be a bit of a problem, but thanks for the heads up...ill let you know if i can organise something about that

[Rick1964]

Hi guys. My name is Rick. I live in Pakenham victoria. I am looking for a rear bumper for a 2003 GUiii. Must be in good condition. Cash buyer.

[growler2058]

Gday mate welcome aboard. Jump over to the intros and say G'day mate, something we ask all members to do, youll get a better response also, cheers

[Lieney]

Or see clark rubber or similar and buy a sheet of rubber mat.
I cut my own and they avoid the scrub with bigger wheels, hang lower and sit slightly wider.

[Woof]

Moved your post here to the correct section and renamed it to help you, but as Growlers said 6 hours ago..it is always a good idea to post an introduction before asking for any assistance mate, not that hard really.

[MudRunnerTD]

whats it worth to you Rick? I have a mate that has one in his shed he might be convinced to part with for the right coin?

As 2 other Mods have said to you though bud >>>>> Say G'day in the intro section or have your thread and account removed! Its really not that hard. We are not Ebay.

[ianmcewen]

hi guys or girls i need a reasonable radiator cowling for gq 4.2 litre diesel. Very Hard to come by any Ideas appreciated . Tiger

[bordertech]

I have GQ doors but no mirrors, glass or window mechanisms in them. They're silver, no rust or dings. $70 and they're yours. Fishers freight in Horsham come here every second day so call them for a quote. Their rates are pretty good too.
I only have brand new mirrors for these doors $40 each they mount to the doorskin not the 1/4 window.
My number is 0400 250 734

Cheers, Dave

[Killametre]

I am sure I have got one in my Wrecking car Logistically no good though long way to freight have you tried Patrolapart??


hi guys or girls i need a reasonable radiator cowling for gq 4.2 litre diesel. Very Hard to come by any Ideas appreciated . Tiger

[MudRunnerTD]

The wreckers in Gravel Pits Road Geelong has quite a few GQs in his yard mate, give him a bell he may have one on a car there and could freight it to you. Or the Big 4x4 Wrecker in Ballarat would certainly be the go, cant imagine them not having a Cowling. Give them a ring

[ianmcewen]

Yes killametre is a tad far for a weekend drive . thaks anyway Tiger

[ianmcewen]

Thanks Muddy tried both those to no avail

[dattodanil]

hi guys,
im looking for a front diff center for my 1989 tb42 shorty maverick. any helpful pointers would be nice. thanks.
prefer in tassie

[Jonzgrl]

WTB:

I'm searching for a 1987+ GQ Nissan Patrol, manual with an RB30 engine.

The engine can be in any condition, but I'm chasing a body with absolutely minimal rust. Paintwork not a huge factor, but preferably in okay condition.

SWB a bonus, but I'll also take an LWB.


Hi Mate, you still looking for one? I've got one if so... :groupwave:
Cheers Drea

[maverick01]

I will have a look but im pretty sure i still have my diff centre that was replaced with a arb air locker. Mine came out of a 1988 Ford Maverick TB42

[dattodanil]

thanks maverick01 :)

[Thirsty]

I have 1 out of a 1998 gu tb45e if all else fails

[Thirsty]

As the title says, I,m chasing a RH Side Stub Axle for a GU. There so bloody exy for a new one.

Cheers
Troy

[41ook_patrol]

hey fellow patroler's
when i bought my patrol the guy had lost the auto transmission dip stick.
i have tryed to find one but havent had much luck.

was wondering if anyone knows where i can get one from r if there is anything else i can use in replacement.

im located in brisbane area.

thanks

[dattodanil]

do they fit thirsy? and do you know if the ratios are the same?

[Thirsty]

Not sure, but they take the same locker

[Morton]

Robbo, thanks mate, your a champion

[97_gq_lwb]

Hers an arb list

2000-2001 Nissan Xterra 6 cyl (Rear)
1998-2004 Nissan Frontier 6 cyl (Rear)
1998-2004 Nissan Navarra 6 cyl (Rear)
1986-2004 Nissan Pathfinder 6 cyl (Rear)
1986-1997 Nissan Hardbody D21 6 cyl (Rear)
1987-1998 Nissan Patrol GQ Y60 (Front)
1987-1998 Nissan Safari (Front)
1988-1994 Ford Maverick (Front)
1998-2009 Nissan Patrol GU Y61 (Front)
1997-2002 Nissan Terrano II (Rear)
1997-2002 Nissan Mistral (Rear)

[nissanluvr]

Hi all after a front diff with 4.6 ratio in good working order in victoria area profferbly. i also have a set off diff centres 4.1 ratios for sale in great condition low ks $500ono or will swap both for front diff centre.

[robbo0001]

No worries mate....better getting used, than sitting in my shed doing nothing.

[Bigrig]

Wreckers mate or try Patrolapart or Nizzbits in Victoria.

[Lieney]

My third
I have:
5 x 06 GU 17x8" alloys in good nick, odd scratch I guess. $200ea
4 x Maxxis 701 AT (I think they are 701) in near new condition 285 65R17 (travelled wodonga to here) road use. $700 all four
2 x BFG AT 265 65R17 - 50-60% road use. $100 ea

$1600 the lot. Or swap for a wheel and 2 x jerry carrier rear bar?+ beer for difference

[NissanGQ4.2]

Hi mate, have moved your thread 2 the Wanted section of the forum

2 save people time looking your posts up

What Patrol / Gearbox are you seeking a transmission dipstick for???

Cheers

Todd

[my third 256]

My third
I have:
5 x 06 GU 17x8" alloys in good nick, odd scratch I guess. $200ea
4 x Maxxis 701 AT (I think they are 701) in near new condition 285 65R17 (travelled wodonga to here) road use. $700 all four
2 x BFG AT 265 65R17 - 50-60% road use. $100 ea

$1600 the lot. Or swap for a wheel and 2 x jerry carrier rear bar?+ beer for difference

had to have them replaced saturday but thanks anyway
stephen

[ianmcewen]

I need a automatic brake adjuster for rear drum brake shoe on GQ 90 model ute please
ianmcewen aka Tiger

[MQ MAD]

Hey lads,
Im chasin MQ/MK L28 power steer belt adjuster/tensioner and the mounting brackets to fit from the power steer pump to engine,will consider a power steer pump with these brackets

[Finly Owner]

Will try to have look in shed weekend Corey.




Tim

[Hoggy]

Hi mate, I did see on another forum a quick guide on making a new dip stick. It had overall and hot/cold lengths listed. I will try and find it and post the link. What model and engine was it for?
Hoggy.

[MQ MAD]

Will try to have look in shed weekend Corey.




Tim

While ya there, see if ya can find the pics of the roll bar ......... lol

[41ook_patrol]

thanks guys its for a 4.2l gq lwb

[Rick111]

I have a GU series 2 Patrol wagon, if any one has done a big lift & still has all their old STD suspension stuff please give me a call. I'm really after the front radius arms & the rear upper & lower stabilizer arms 2 short & 2 long ones. I'm in Ipswich QLD so please only in my area & upto a 100klm radius.

Cheers guys,

PM me ( Rick ) if you can help out

[nissannewby]

I have some of this gear at home mate ill have a look tomorrow and pm you with what i have i need to get rid of it and make some space in shed.

[2LV8ETR]

Update:

I've sort of given up on this project now because just about every Patrol I've been to inspect has some form of major rust in it. One guy was even asking $8k for one with both roof rear corners and the passenger side rear slider window eaten away that badly you could see into the cabin. I could go the way of the GQ 2.8LTD but with the price of these still hanging around the $10-15k mark, it just isn't logical.

I've researched and decided instead to drop a V8 into the Surf which will set me back less (about $6K) than what it would take to purchase a Patrol. The only decision left now is whether to go with the 1UZ-FE or 350/LS1. All adaptors for the 350 will set me back around $2.5k and the engine around the $3-4k mark. The 1UZ-FE is about $1.2k for a half cut but there is a lot more work involved in setting it up. Compare that to buying a rust-free Patrol and dropping in a 400hp $4.5k RB30DET and you will understand that it just isn't a financially sound investment or practical.

Trying to find a good Patrol for under the cost of converting the Surf seems to be unlikely, and I've had enough of travelling to see these "excellent condition" Patrols only to be faced with another disappointing example.

Decisions, decisions.

Thanks for the interest and help guys.

[97_gq_lwb]

I have seen a few nice rd28 gq patrols about with blown up motors cheap enough actually i have bought two of them lol keep looking .
You just have to have the cash waiting and jump on them as soon as they pop up.

[growler2058]

Oh man keep lookin for a troll you have toothpick axles on your surf! i destroyed a lolux front diff with a tired commy v6

[Hoggy]

Hey guys, are these available at all? I'm sure I've seen a couple drive past...

[MudRunnerTD]

Yes they certainly are Mate. A couple of members are making them.

Search "stickers" in the search and you will find them. Sorry on the iPhone and it will be easy to find mate.

[oncedisturbed]

if you PM TasLucas, he has made a set up and a few other members but i can never remebers. I got mine of Tazzy

[NissanGQ4.2]

All the info on stickers can be found here:

http://www.nissanpatrol.com.au/forums/showthread.php?11585-Nissanpatrol.com.au-Stickers

Cheers

Todd

[Rick111]

I have some of this gear at home mate ill have a look tomorrow and pm you with what i have i need to get rid of it and make some space in shed.

Hey Newby I've sent you a PM!

[crog83]

Im chasing a complete unpainted front plastic bar to suit a series 1,2,3 gu.
I'm located in the brisbane area but can travel if needed
pm me of interested
Cheers Craig

[Ben-e-boy]

Gday

I'm chasing a cylinder head for a td42. I want one that is a throw away item ( cracked,warped etc) dosnt need valve train but I would like a valve or 2.

I only want it to screw around with port design, valve grind etc then turf it.

Cheers
Benny

[NissanGQ4.2]

Hi Craig first things first, Could you head over to the introduction thread which can be found in my signature line................always good 2 introduce yourself to the community.

Secondly, I have removed your mobile phone number, At the end of the day its really your choice if you display it or not ( so put it back up if u really want it displayed ), just remember anyone and everyone can see your post not just forum members.

Cheers

Todd

[97_gq_lwb]

I have one you can have

[Tango173]

G'day

Currently in the process of putting 3rd row seat in my DX GQ.
I have the bench seat but have been struggling to find the floor bracket that the seat locks down onto.

If anyone's got one they no longer require, i'm happy to take it off your hands with a small donation and obviusly transport costs to my home town in WA

Cheers

[NissanGQ4.2]

Rick, I have removed your mobile phone number, At the end of the day its really your choice if you display it or not ( so put it back up if u really want it displayed ), just remember anyone and everyone can see your post not just forum members.

Cheers

Todd

[Hoggy]

All the info on stickers can be found here:

http://www.nissanpatrol.com.au/forums/showthread.php?11585-Nissanpatrol.com.au-Stickers

Cheers

Todd

PERFECT mate, thankyou very much :)

[91 gq wagon]

Im in urgent need of a gu st ute (must be st ute with sunglasses holder next to rearview mirror).

The reason why I need this type of ute is cause I make roof consoles for these types of 4x4 and in this case I need to finish making the holes in the consoles for the rear light and make markings for where it needs to be bolted on.

If any one can help me from the caboolture area I am willing to make them a console for their gu st for free.

Please pm me or email me on Torana_1977@hotmail.com if you can help me.

Thank you

[Rick111]

Rick, I have removed your mobile phone number, At the end of the day its really your choice if you display it or not ( so put it back up if u really want it displayed ), just remember anyone and everyone can see your post not just forum members.

Cheers

Todd

Thanks for that Todd.

[AB]

Show us some pics and info about it when you get yourself sorted out too mate.

[robbo0001]

Mate I have a gold front bumper assembly Off a 99gu in my shed...
Think I still have the brackets and bolts if your interested.
Gunna be hard to get a "non coloured" secondhand bumper,
Just need a sand,some plastic adhesion primer and the colour code of your car.
Live in north brissie if your interested.
Cheers

[penGUin]

hi guys and girls,
I am after a(maybe 2, depending on price) factory GU 17" alloy rim for my 05 GU for a second spare.
i am in the NW of WA so if you are in WA let me know if you have one, or know someone that has one for sale?
thanks
willy:biggrin:

[penGUin]

oh i should mention, i would like to find one that is still in good condition too without gutter rash haha thanks
any pics would be handy too
cheers

[Clunk]

From what I've heard...... Rare as rocking horse poop and nit cheap when they do come up, sorry can't help but all the best with your search mate.

Saying that though, someone will probably come along and prove me wrong lol

[penGUin]

hey mate thanks for the reply.
I thought they would be abit hard to come by, kinda sucks abit. Which means il give up an arm and a leg for one I'd say.
But that I why I thought id post on ere just incase one pops up.
Fingers crossed. :)

[MudRunnerTD]

I am selling mine at $200 a rim and getting it on Ebay mate, I'd be happy to ship one to you at your cost if your interested. pm me if you want any. I have sold 2 and have another 4 to sell.

Rims are stripped of rubber and are in very good condition. Some slight marks in the clear coat but definitely NO Gutter rash

[Clunk]

I am selling mine at $200 a rim and getting it on Ebay mate, I'd be happy to ship one to you at your cost if your interested. pm me if you want any. I have sold 2 and have another 4 to sell.

Rims are stripped of rubber and are in very good condition. Some slight marks in the clear coat but definitely NO Gutter rash

See I said some one would prove me wrong!!!!!!! Thanks for that MR lol

[penGUin]

thanks MR, PM sent.

[ishie]

hello does anyone know where i can get a set of rear brake drum (http://www.autopartswarehouse.com/brake_drum~pop.html) new or used to suit my 92 y60 tray back
thanks mjmd57
hi i get my brake drum on ebay. try in there. they have a very low price for that. good luck mate!

[Finly Owner]

Hey All, Please try to mention both Snicko and TasLucas when recommending stickers. As both these members offer them. And if my memory serves me correctly, SNICKO made our first lot. Of which I have one and am happy with.

TasLucas seems to be pleasing the natives with his product also.

But I think we need to support both of these great members.


Tim

[Finly Owner]

ok, sure will

[Clunk]

not everyone knew or knows that Snicko did the stickers Tim, hence the reason Toddy started that stickers thread and points people to it

[Finly Owner]

I can supply an MK Wagon...........





Tim

[Finly Owner]

not everyone knew or knows that Snicko did the stickers Tim, hence the reason Toddy started that stickers thread and points people to it
I understand that, That;s why I suggested we offer both members services.




Tim

[MudRunnerTD]

Yeah poor old Snicko had just got a new batch done and paid for when ol' mate Tas did his first run and I think she kinda got left holding allot of stock. Buy from either as they are both quality stickers guys.

Wear them proudly

[Finly Owner]

Yeah poor old Snicko had just got a new batch done and paid for when ol' mate Tas did his first run and I think she kinda got left holding allot of stock. Buy from either as they are both quality stickers guys.

Wear them proudly Exactly.

Tim

[Clunk]

Yeah poor old Snicko had just got a new batch done and paid for when ol' mate Tas did his first run and I think she kinda got left holding allot of stock. Buy from either as they are both quality stickers guys.

Wear them proudly

It didn't help, that she went a little quiet on here at the same time too................. I've had stickers from both and couldn't be happier, also got a sticker from the original guy.

I'm up for supporting any one I can on here, as long I can afford it

[Finly Owner]

It didn't help, that she went a little quiet on here at the same time too................. I've had stickers from both and couldn't be happier, also got a sticker from the original guy.

I'm up for supporting any one I can on here, as long I can afford it
As I am sure we all are.

Is Snicko(DARTH) still around, as you know I don't get much to time to visit NS/GB threads.

Tim

[Clunk]

As I am sure we all are.

Is Snicko(DARTH) still around, as you know I don't get much to time to visit NS/GB threads.

Tim

not seen her on for a couple of weeks but no doubt she's lurking somewhere

[growler2058]

As I am sure we all are.

Is Snicko(DARTH) still around, as you know I don't get much to time to visit NS/GB threads.

Tim

She or he is most definitely around ;-) And can often be found lurking in thought of the day


Tapp tillya Crap

[hekarewe]

would a st wagon do???

[FLEAGQ]

Ive got it if you are interested... :)

[Brendan56]

After a set of 5 negative offset rims for a 93 Mav, preferably not black ones.
Offset of around 22. with or without rubber.

[97_gq_lwb]

I am looking for the same i found these http://www.ebay.com.au/itm/120935013793?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649

Shame they are black but then it doesn't bother me.

[97_gq_lwb]

They recommend a negative 26 offset here but $70 each in white.
http://www.mullins.com.au/stw-ranger-app-guideA.asp?DataBankId=58&DataBankCat1Id=1

http://www.mullins.com.au/co-ho.asp

[taslucas]

Go the black. Black rims look tough! (what colour is your mav Brendan?)

Tap, crackle, pop

[Brendan56]

Grey maverick, think I'd look like a tool with black haha
Also how far out would 26 sit?
Tappin trolls
Brendan

[Winnie]

Black rims are always tough!

[Brendan56]

So many townsville boganluxs with black rims. Otherwise I would haha.

Tappin trolls
Brendan

[taslucas]

Grey maverick, think I'd look like a tool with black haha
Also how far out would 26 sit?
Tappin trolls
Brendan

Not sure how far out they would sit, would depend on how wide the rim is and if you went the 10.5" or the 12.5" wide tyre.

Tap, crackle, pop

[taslucas]

So many townsville boganluxs with black rims. Otherwise I would haha.

Tappin trolls
Brendan

Don't matter what colour you put on a gutlux, it's still gonna look cr@p. Just remember your in the mighty patrol now!!
(and yes I do have black rims!! Haha)

Tap, crackle, pop

[Winnie]

If you have a look in my thread at the photos where I have my mud tyres on, they are -22 offset so -26 would sit out 4mm further than that. Would definitely stick out past the stock guards, if you've got flares you would be fine.

http://www.nissanpatrol.com.au/forums/showthread.php?7716-Chris-GQ-ST-Wagon-quot-The-Party-Bus-quot

[Brendan56]

Yeah I don't mind some flares, make it tougher ;-)

Tappin trolls
Brendan

[97_gq_lwb]

I made some bunnings garden edge flares up for mine lol

[Brendan56]

Ah I'm lazy like that, I'd rather pay :-P

Tappin trolls
Brendan

[taslucas]

Yeah I don't mind some flares, make it tougher ;-)

Tappin trolls
Brendan

I've seen soooo many gutluxs with them.........

LMAO!!

Tap, crackle, pop

[Brendan56]

Aha, no flares then!

Tappin trolls
Brendan

[91 gq wagon]

I make consoles to fit Gq and Gu wagons but now need a gu ute

[GUtsy ute]

Did you get my PM on the 22nd?

[nissannewby]

I pm'd the bloke to as i have an st ute but aint heard anything back yet.

[Gqtroll]

Hey guys

Looking for a TD 42 to swap into 90 gq ute while I take my time rebuilding currnt motor.

I have all bolt ons for engine.

[Gqtroll]

Sorry my phone cut me off and posted before I said thanks

Cheers
Darcy

[simdogs]

Hey not sure where you are or how much you want to spend but there's a rusted gq TD42 with only 220000km for $2500 negotiable if you don't have time for a rebuild

http://www.gumtree.com.au/s-ad/hermit-park/cars/1993-ford-maverick-wagon/1003709208

[Decthebeast]

Oh sh1t! Sorry guys. I have been really busy with grade 12 for the past couple of weeks and completely forgot I had posted this ad! I totally understand if none of these offers still stand.

[simdogs]

Cheers mate,

Is it the same as this one in the pic, 13cm between screw holes.

Any chance you could post to Hay NSW 2711 and how much you want for it.

PM if you like

Cheers
Simon

[Finly Owner]

Oh sh1t! Sorry guys. I have been really busy with grade 12 for the past couple of weeks and completely forgot I had posted this ad! I totally understand if none of these offers still stand.All good, forgot you were so young. Hubs still available for you.



Tim

[91 gq wagon]

Thank you to every one for offering their help I have now found a ute to finish my consoles

[sardzmcduff]

Hi, trying to find a set of, preferably, mud tyres in either 33 or 35 inch on rims with a decent offset for GQ. I'm located in southern suburbs of adelaide, let me know what you've got.....
Cheers

[maverick01]

Hey mate, I have a set of bfg km2s mounted on 15x8 white dynamic sunraysia rims with a neg 23mm offset and the tyre size is 33x12.5x15. These tyres have literally only driven roughly 650kms on bitumen and gravel.

The only downside is im in Brisbane but if you want to organise freight i will assist in getting them to the freight company.

[abbo_05]

Hi,
I have just brought a GU DX it's fairly stock so am after a few things, but first im chasing 33's all terains with rims and decent tread, as will be mainly on the sand fishing, and a 2 inch lift!!
I'm located in Perth,
Cheers!

[sardzmcduff]

Did you have a price in mind maverick01? is it a set of 4 or 5?

I've come to terms with the fact I may need to freight from interstate, or be VERY patient for the right set to come available in Adelaide.......= )

[maverick01]

That is a set of 4 in total and make me an offer thats reasonable and if it is reasonable then i will assist in delivering them to the transport company to help you out

[Boagie]

Hey guys,just chasing a set of spotties,just some decent hellas or something...nothin too flash ,just some run of the mill decent spots...will pay for postage aswell...anyone got a set layin around they might want to sell???? cheers Boagie:biggrin::biggrin:

[Brendan56]

Have you tried fleabay and gumtree? surely they'd spark some results. Also may help if you include your price range, no doubt some of the WA members will have some in their treasure chests.
Cheers, Brendan.

[Hoggy]

Has anybody got a Cargo Barrier (either full height or top half) up for sale? 98 GU.
Any condition is okay, within a couple hours of Melbourne preferably. Price not too critical, just cheaper than new!
Cheers, Hoggy

[Hoggy]

To suit GU, standard or slightly wider off-set okay. Pref black. Within a couple hours of Melbourne.... Price would depend on type and condition.
Thanks, Hoggy!

[Clunk]

I know these are no where near you but................. http://www.gumtree.com.au/s-ad/herdsman/other-parts-accessories/nissan-patrol-cargo-barrier/1004086748

[Hoggy]

I know these are no where near you but................. http://www.gumtree.com.au/s-ad/herdsman/other-parts-accessories/nissan-patrol-cargo-barrier/1004086748

Oh mate, that's just cruel! lol
Thanks though ;)