Merged - Deleted "Wanted"

[nowoolies]

Shhhh .... you're ruining the surprise!!! lmfao

oooopppppssssss sorry i thought he knew you ....roflmfao

[scottyshams]

hey guys blew my cvs lookin for new/secondhand ones need asap im in sydney so if anyone can help would be awsome even if u no a wrecker or shop that has them. help would be greatly apreicated
msg me on 0404846785

cheers Scotty

[4x4fun]

Hey guys im jake i live in brissy and love 4wding used to do it alot when i was younger but then we got ride of our 4wd but no ive got my licence im keen to get back into it.

Ive been saving so ill have a bit im really wonting a 4.2td gu wagon or ute prefferbly wagon price range 12,000 to 18,000 i no it probly isnt possible but im determind to get one all my mates have landcruisers n i dont wont to own a toyota hahahha im a nissan man prove them all wrong hhahaha anyway if anyone nos of anything or is selling let me no would greatly appreiciate it.

cheers jake.

[growler2058]

Gday Jake welcome aboard theyre a good mob here full of useful info and advice. I hope you find your perfect troll mate

[nowoolies]

g`day Jake
welcome on board mate
heaps of laughs and bucket loads of info here enjoy
nowoolies
Paul
p:s piccies we luv piccies

[macca86]

welcome aboard GQ's with aftermarket work will be in that price range with all the bells and whistles GU on the otherhand may be at a bit of a stretch but good luck in your search. Or go a 3ltr I have one and for 20G got heaps of aftermarket gear

[Bob]

Welcome Mate. Best of luck in your search for the perfect Gu. Join in and enjoy

[YNOT]

hey guys blew my cvs lookin for new/secondhand ones need asap im in sydney so if anyone can help would be awsome even if u no a wrecker or shop that has them. help would be greatly apreicated
msg me on 0404846785

cheers Scotty

To suit a 1997 GQ.

[NissanGQ4.2]

how did you go sourcing one???

[katwoman]

Welcome, mate.. If you can find a 4.2 TD GU for $12k, jump on it !!!!! Dont like your chances, but good luck in your hunt..

[4x4fun]

Thanks guys n dw ill post pics when I get the beast haha ill find one I hope:s haha cheers guys

[Woof]

Hey mate, how about posting up an introduction just to get everyone on side from the start, we like everyone to post up an intro so we can welcome you here.

[fixer982]

Welcome Jake. Goo dto see a man searching for a GU. Enjoy your time with us here. Lots of friendly people here. Oh, and we love pictures here.

[4x4fun]

hey guys after a 4.2ltr TD gu patrol wagon maybe ute depends lookin around $12k to $18,500 i no its an ask that is pritty much not gunna happen but you never no anyway let me no if ya no of anything.

cheers jake

[scottyshams]

yeh mate 2.8td

[Woof]

Just moved your post to here Jake, so hopefully you may get some assistance in finding your new toy mate

[patrol_maverick]

WANTED: GQ/GU standard radius arms.

WILLING TO PAY: Cash, price depends on condition

WHERE: NSW Mid-North coast

CONTACT: PM or patrol_maverick@optusnet.com.au

[NissanGQ4.2]

HI mate, post up an intro when you get a chance, you will find more members will try and help out if you have an intro up

cheers

Todd

[Woof]

Hey Jake, if you go onto FaceAche and join this group http://www.facebook.com/home.php#!/groups/6206406015/ you will find this mate
Nissan Patrol 7 seater GQ
4.2L Turbo Diesel 1989
5-speed manual
Asking $5,500
extras:
...bullbar, sidesteps, snorkle, towbar/ball, Rancho suspension, alloy rims, lift kit, cooper tyres (near new over 90percent tread), Diff lockers, overhead uhf console, darkest legal window tint. Extra dash gauges for oil temp and turbo, plus rancho gauges. Stereo (CD, AM/FM radio). 3rd row seat included. 5 mths qld rego. standard fuel tank. small amount of surface rust inside doors and along roof gutters.

[4x4fun]

thanks for that mate ill look into it i no its not a gu but you neva no hey

cheers for that the dogman

[growler2058]

Nuthin wrong upgrading to a Q hahahahhahaha

[Woof]

thanks for that mate ill look into it i no its not a gu but you neva no hey

cheers for that the dogman

No worries mate and it is up in North QLD as well

[4x4fun]

haha yea i dont mind a GQ but ill only get one if its a wagon n its got a tray cut into it with a lift n tyres n stuff otherwise nar would profer the GU beast hahaha.

[zeimi]

Evening, am in the market for a used leaf sprung rear diff with drum brakes complete for a 89' GQ Patrol 4.2L SWB ute. Would prefer a seller in Tasmania but would consider interstate if I could organize it. If anyone has above mentioned and is keen to sell please let me know and can see what we can arrange :)

[DX grunt]

G'day Jake

Welcome to the forum. Great to have yo here.

Take care out there.

Rossco

[4x4fun]

man its hard to find a good buy hahaha im intresterd in a 4.2TD GQ dual cab aswell if i cant find a GU so would be great if yas could keep an ear out for me thanks fellas

[wkndwarrior]

hi all.. I'm chasing a pair of drop out cones for my 89 gq patrol if anyone can help? I know a few places sell them but seein if I can get some cheaper.. I have 7" lift kings with procomp 9000 and the spring pops out on full flex.. any help appreciated..
cheers, Ryan

[Silver]

I thought drop out cones were something smoked in a drop out bong :-)

Wkndwarrior, there are people on here who play at your end of the fit out spectrum, and I'm sure you'll get an informed and helpful response (unlike mine) soon :-)

[wkndwarrior]

hahaha!! cheers silver.

[robbo71]

Well the old drivers seat has finally sagged and become very uncomfortable so it's time to rejuvinate the old girl.
I want to replace both front seats to keep the matching pair look in the GU so wondering if anyone out there knows if there are there any seats from other vehicles that can bolt straight in with all the same adjustment points.

I'm based in Sydney.

[MQ MAD]

Chasin as above ,
A 5 speed bellhousing from an MK patrol with an L28 motor

Will also consider a complete 5 speed box, but must be from an L28
(Starter on the drivers side of bellhousing)

Will also consider a dead MK L28 5 speed SWB

[Bakes]

G'day everyone, I'm after the assembly that sits in front of the t-case and gear lever that houses 2 power sockets and about 4 switches. I need it in K trim. Unfortunately, the utes didn't come out with them, so anyone with a dead wagon, please help :-)

Thanks

[Scabad]

Burden

If your still looking I have an ARB steel full length GU Roof rack ( Less mounting kit needed it when I swapped to an alloy.) Its in Sydney, probably doesn't help, but let me know if your interested. The ARB mounting kits are approx $350

Cheers

Scabad

[big_fletch]

Check out this thread mate
http://www.nissanpatrol.com.au/forums/showthread.php?5030-Cheap-roof-racks&highlight=roof+rack

Fletcha

[Bakes]

If you want to detour to Townsville on the way to the springs, I've also got an arb one doing nothing. It has mounts etc and is 3/4

Steve

[Aquarian51]

This one is on Gumtree for $50 in Southern River WA. http://perth.gumtree.com.au/c-Cars-Vehicles-Motorbikes-Parts-parts-accessories-other-parts-accessories-Ally-bull-bar-W0QQAdIdZ294900991

[Giggidy]

Hi guys - after a switch as indicated above after I buried that side of the car in mud last weekend. Photo of the switch in question below.
Thanks if you can help.

[Clunk]

try Nizzbits or patrolapart................. bothe vendors are on here, or try a breakers

[Giggidy]

Thanks heaps Clunk.

[Bagheera]

I have the financial controller's blessing, so I can finally start shopping for a new (to me) vehicle.

Looking for a 2003+ Patrol near Sydney. Ideally with the 4.2 TD, but if not, then the 3L TD.

Nice to haves:
Tow bar
Decent tyres
Cargo barrier
Front bar (winch not required, so factory alloy is fine)
Side steps/rails
Roof basket

Budget is something near $20k, depending on rego and what else I'll need to buy for it.

If you have something to offer, let me know.

[ghostrider_oz]

Lovely little old lady drove a shopping trolly into the side of the Patrol today so as the title says looking for a Driver Side Front Quarter Panel Indicator to suit 1998 GU Patrol

Cheers,

Scott

[Bigrig]

Lovely little old lady drove a shopping trolly into the side of the Patrol today so as the title says looking for a Driver Side Front Quarter Panel Indicator to suit 1998 GU Patrol

Cheers,

Scott

Try Patrolapart or Nizzbits in Melbourne mate. They'll have em no doubt and far cheaper than Mr Nissan.

[Bagheera]

Disregard - 2003 ST-L purchased last night. Members Ride thread coming as soon as the rain stops.

[Clunk]

good work, look forward to seeing it mate

[Boagie]

hey guys ,am chasing a centre console for my ute---a gu one ---greeny/grey in colour-cheers:D

[TurnerGQ]

hi im after a 4.2 petrol engine for my GQ because the head on mine is stuffed. if you have one or know of one give me a call on 0457020491 . thanks

[Dhuck]

Welcome to the forum mate. But if your looking for a bit of help, it's always a good idea to visit the introductions first and say gidday. But there are many friendly and helpful people here.

[growler2058]

Gday mate welcome aboard theyre a good mob here full of great info and advice

[AB]

I know of a TB42 which will be available soon but it is in East side of Melbourne.

Let us know if your interested and I will send you in the right direction...

Welcome to the forum too!

[Bigrig]

G'day mate - Welcome aboard. Great people, information and laughs to be found on the forum, so don't be shy and join to make the most of it. Enjoy!

[taslucas]

Hi guys,
Im in desperate need of a carby for a GQ TB42 AUTO.
Just purchased the vehicle, and it has a fully reconditioned and tuned carby with receipts. Only problem is that its for a manual instead of an auto so it has no throttle position sensor. I found out the hard way when it fried the torqe converter!
So i need a carby or just base plate and throttle position sensor to suit a GQ TB42 AUTO.

[Bigrig]

Sorry to hear mate - hopefully you'll find what you need ASAP!!

[dirty_dog]

need the two back windows for me gq shorty

[Bigrig]

OZAUTO on here mate just advertised GU ones (think they do GQ as well), and they look pretty good - complete rubber framing etc.

[trollman]

Tent floor is 2.3. Meters square. Height is about 2.0m

Is black wolf brand. But needs a new fly. Dog shredded the original.

[turboeddy]

Hey all Im after a GQ PATROL rear diff asap to suit rb30 pretty sure there 4,3 if any one had one plz let me know 0478040802

[YNOT]

Welcome to the forum Ed, where are you?

Tony

[growler2058]

G'day mate welcome aboard they're a good mob here full of great info and advice

[turboeddy]

Hey guys Im from woodend vic hopefully I can get one need asap

[taslucas]

Welcome mate. Ive been seeing a diff for sale on gumtree.com for a while. From a 96 diesel. $100. Its in tassie though (ulverstone) so might not be of much use.

[Patrol Tico]

Hello there!
I would like to know what ute stands for? thanks

[Bigrig]

Hello there!
I would like to know what ute stands for? thanks

'Utility' - traybacks and stylesides - traybacks as name suggest have the tray on the back, and stylesides are when it's normal panel work

[taslucas]

Found one from a wreckers. complete carby. Its out of the state so i havent seen it. But they say "very good working condition", $245. Does that sound like a fair price?

[benno]

Howdy Guys & Girls, does anybody Know of any high lift winches for sale at a good price, I have a bull bar thats made for one, so I either have to cut and shut the one I've got or fit a high mount,any ideas are also welcome.

Cheers Tony.:)

[growler2058]

EDIT: ooops stuffed up

[growler2058]

Let me try that again.

G'day all im looking for a GQ steering wheel in good nick, canna find on the ol ebay so if someone wants to part with one for some coin yell out cheeeeers

[Bigrig]

Why a nissan wheel? Those autotechnica ones (380mm outback that I put in mine) look better and are easy to fit ...

they're obviously a few more dollars than a second hand Nissan one though ...

[YNOT]

Finding a good Nissan wheel is getting harder and when you do find one they charge a heap for it knowing how rare it is. Makes the aftermarket wheels look like better value.

Tony

[Bigrig]

This one boss ....

7743

[growler2058]

Finding a good Nissan wheel is getting harder and when you do find one they charge a heap for it knowing how rare it is. Makes the aftermarket wheels look like better value.

Tony


Why a nissan wheel? Those autotechnica ones (380mm outback that I put in mine) look better and are easy to fit ...

they're obviously a few more dollars than a second hand Nissan one though ...

MMMM can ya convince my beloved i need ta spend a bit more on Agatha

[HippoNZ]

could always go for a pulsar or skyline one, there more compact and will have a nissan logo! lmao

[growler2058]

Ahhhh thinkin mans man well done i'll look into it, would i need to change te boss

[Clunk]

from memory (which isn't very good at times) I think there's a thread on here somewhere saying the the Pulsar N13 or was it N14 steering wheels boldts straight on with no fuss

[Bigrig]

Ahhhh thinkin mans man well done i'll look into it, would i need to change te boss

Yep - you'll need a boss kit

[Bigrig]

Howdy Guys & Girls, does anybody Know of any high lift winches for sale at a good price, I have a bull bar thats made for one, so I either have to cut and shut the one I've got or fit a high mount,any ideas are also welcome.

Cheers Tony.:)

Check out the specs for the warn high and low mounts mate - read a thread in another forum that pans the highmount for everything except good line speed (more maintenance, more expensive, not as powerful, etc). Not sure how to help on this one boss! Decisions, decisions ...

[Silver]

If the problem is that the cover rolls on the frame, it can be glued back on

[Bigrig]

If the problem is that the cover rolls on the frame, it can be glued back on

Absolutely correct - syringe with super glue is apparently a trick, but haven't done it myself.

[growler2058]

Thanks silver n biggus the outer is loose but dint reckon glues gunna help me ay hahahahahaha7745

[katwoman]

Let me try that again.

G'day all im looking for a GQ steering wheel in good nick, canna find on the ol ebay so if someone wants to part with one for some coin yell out cheeeeers

Correct me if I'm wrong, but isn't it the round thing in front of you, when you sit in the drivers seat ???? haha


(payback for bagging N/S)

[growler2058]

Correct me if I'm wrong, but isn't it the round thing in front of you, when you sit in the drivers seat ???? haha


(payback for bagging N/S)

No need to be .......hang on gotta check the dictionary .....nup cant find it! Facecious hahahahahahhahahahahaha

[warey]

yep chasing some doors for a 02 dx i really need passenger rear right door and will buy other three doors if price is good i have all doors now which are complete but are very rusty so i can get by if donor doors are missing windows etc colour not important

[benno]

Howdy Bigrig,

I hear what you're saying, it would be better to cut and shut than to stay with the idea of a really expensive winch.

[MudRunnerTD]

They are the same bolt pattern as a low mount mate, any lowmount will bolt straight in to the bar you have... what brand is it?

[benno]

Howdy MudRunnerTD, not sure what brand it is or weather it's a home made job, but it sticks out a bit at the front so would need to be cut back or spaced which wouldn't be that good. A normal winch is too wide to mount in.

Cheers Tony.

[510sss68]

wanted GQ rear diff complete or just housing and axels?
email petespaint@y7mail.com
or ph 0418568510
cheers pete
ps in SA PLEASE

[510sss68]

hi there
i need another GQ
looking for a cheap GQ shorty complete or roller?
in SA only please
or swap for my 1990 toyota dual cab 2wd ute lpg,mags

call pete on 0418568510
or email petespaint@y7mail.com

[6666slayer]

As stated above, I'm looking for a GQ Patrol RB30 Distributor and Manifold with carbie to suit. If you've got one of these for sale or know someone who does, please PM me or email me on: jdl6666@live.com

[Bigrig]

Howdy

thought I had my hands on one earlier in the week, but that fell through - could I ask that if anyone hears of one, or spots one on a website somewhere to let me know. Been looking at the Long Ranger ones and may have to bite the bullet and get one, but you never know ... stranger things have happened.

Many thanks in advance one and all ... greatly appreciated as always!!

[benno]

Howdy

Try All Four x Four parts at Minden (half way between Brissy & Toowoomba) Ph 07 5426 8365 or www.allfourxfourparts.com, they have allot of stuff.

Cheers Tony.

[Bigrig]

Thanks mate - have just submitted a request through their 'parts finder' section ... greatly appreciated!!

[benno]

No worries good luck

[nemo]

Just putting feelers out for a open hemisphere to fit my rear diff.

long story short, I brought a lokka to suit my MQ and thought I had a open diff, but it was a totally stuff LSD.
Cant exchange it as lokka dont do a MQ LSD set up.

Just need a open hemisphere with side and sun gears.

hoping to find one local but had no luck so far.

[Finly Owner]

where are you? And when do you want one?


Tim

[nemo]

North East Tasmania. About 6 hours ago.

You have a MQ one ?

[Finly Owner]

I have a spare diff and have to check if open or not.

Tim

[nemo]

Ok thanks, hoping to find some thing local over the week end so no hurry

[nemo]

Open diff center found $95 for complete center and only 20 min drive away.

[Bagheera]

Trying to get the new tourer set up before the school holidays.

Confirmed my Koni shocks are good for a 2" lift, so I'm after the springs to suit. Steel bar on the front, and drawer setup coming for the rear, so the heavy duty or constant load units would be preferred. Happy to pay freight on them if they are coming from outside the Sydney metro area.

After a full or half height cargo barrier to suit a GU 03. This would need to be local as freight would be expensive.

Also after some roof racks or a roof basket. 3/4 or full length is fine, and happy to clean up an old basket if it's a bit rusty, etc. Again, Sydney metro +/- 75KMs for this.

If you have any of the above and you want it out of your shed/garage, give me an idea of price and location, and I'll bring the cash.

[Silver]

I painted an old roof rack with hammertone, admittedly spray gun not brush. Looking at the prices discussed on here for a new roof rack from flea bay, or better, check one of the forum vendors, maybe I'd have been better off buying new one.

[Ben-e-boy]

Hi all

as some of you may know I've done myself a mischief and broken the ute.
What I am chasing is the short side axle/cv (drivers side)
Cheers
Benny

[benno]

Did you end up finding one ?? just interested thats all.

[Bigrig]

Did you end up finding one ?? just interested thats all.

Nah mate - tried that online spares thing also, but have had not much response as yet (and no's from those that have replied).

[dirty_dog]

i posted that wrong, got the windows, need the rubbers. how much

[dirty_dog]

looking for a cheap secondhand mechanical fuel pump for sale in wa. don't wanna muck around with australia post

[Bigrig]

i posted that wrong, got the windows, need the rubbers. how much

They quoted me $340 for the wagon rear window rubbers ($170 per side) which I'm going to get this week now I'm not starting the engine build - are the Shorty's the same window frame?

[Benno7]

Hey mate it Might help putting what engine its for.

[benno]

I thought they may have had one, could be worth giving tem a ring.

[Bigrig]

I thought they may have had one, could be worth giving tem a ring.

Righto boss - will do!

[BillsGU]

I'll give this a bump again as we have HEAPS more forum members. Still looking for a second hand set or single rims.

[Bigrig]

No help here at my joint old mate - but will keep eyes peeled now reminded! Good luck with it - must be getting annoying for you now ...

[NissanGQ4.2]

Hi all

as some of you may know I've done myself a mischief and broken the ute.
What I am chasing is the short side axle/cv (drivers side)
Cheers
Benny

http://www.ebay.com.au/itm/ws/eBayISAPI.dll?ViewItem&item=130573951443&clk_rvr_id=265102576009

[dirty_dog]

tb42 carbie

[nowoolies]

try Perth 4WD centre
9-470-1755
if they aint got it ...someone dont make it hahahahahaha
second hand parts wreckers

make sure you tell him you found the link on here mate

[Clunk]

sorry mate, I've seen similar but not the same........... will still keep an eye out though

[Finly Owner]

If I find one you'll be first to know!



Tim

[patch697]

G/day all...

I'm on the look out for 1 or even a pair of Polly air bags that go inside the existing coil springs on the rear.

I have a split in mine & to date I have found nothing that will hold a repair & frankly, I've given up on trying.

So if anyone's got a 1 of or even a pair there looking to offload PM or email me at the links below.

Cheers
Paul

[Maxhead]

Funny you just posted that, I was just on eBay looking at some for me Troll for when I start towing the Expanda..LOL

[patch697]

Funny you just posted that, I was just on eBay looking at some for me Troll for when I start towing the Expanda..LOL

What did you find????

I may have to bight the bullet myself yet & go new.

[Maxhead]

What did you find????

I may have to bight the bullet myself yet & go new.

Around the $300 mark for the polyair ones and for coilrite firestone ones.

[patch697]

Around the $300 mark for the polyair ones and for coilrite firestone ones.

Yeah...... Thought as much. I can get them direct for that.

[Maxhead]

Yeah...... Thought as much. I can get them direct for that.


They're about $150 from USA for the Coil-Rite but I just can't find the right partnumber

[patch697]

They're about $150 from USA for the Coil-Rite but I just can't find the right partnumber

Well crack onto it lad as times a ticking........hahahahahah

[smrt4u]

I heard there is a tow hitch available to bolt on to the rear bumper instead of the recovery loop. Anyone know about it? Or where I can get one?

[patch697]

We use a haymon reece unit here mate.

Whats your location?

[beansathome]

looking again guys moved to morayfield now so closer to brissy

[Finly Owner]

Hi all,
I have a fella down tha road wanting a SD33T for a MQ Wagon I got him over 6 months ago. He is able to drive a reasonable distance to pick up. He is not sure how much he is willing to spend. Obviously after a reasonably good one to drop in and drive. I reckon something that may need rear/front seal or tappet/sump cover gaskets would be acceptable as these could be done before install.

PM me if you know of any or see anything.


Thanks Tim

[macca]

Is that the engine in that Datsun ute my wifes family are selling? 3.3 6 cylinder diesel 162000klm.
Want to trailer it to Qld, its a long way to home from Vic ouch
Macca

[Finly Owner]

Sorry Macca yours doesn't have a turbo though, does it? If I could get it for him I would. But, he wants a turbo diesel



Tim

[macca]

Had a feeling T stood for turbo

Thanks anyway Tim

Macca

[lukey]

hi, i have a GQ Patrol RB30 Distributor and Manifold with carbie in working order im getting rid of if you want it get back to me with acceptable offer..
luke

[NissanGQ4.2]

If anyone has an Oil pump housing sitting around 2 suit a 1992 TI GQ Patrol, RE4R03A Automatic gearbox.

Or if you now of anyone place that does them new

Can you let me know

Thanks in advance

Todd

[NissanGQ4.2]

Disregard original post, looks like I have found a second hand one.

Anyone needing a new Oil pump housing, for the RE403A be aware there are three different types for the GQ depending on year model.

Garry at Nizzbits (http://www.nissanpatrol.com.au/forums/member.php?132-NIZZBITS) also sells brand new housings if your after a brand new one.

Thanks again Garry for all your help, much appreciated

[Woof]

One of our club members is looking for 3 leafy GQ diesel utes in avg/good condition for a avg/good price. ASAP.
If you are located in WA and can assist PM AB for my mobile number (oh Andy PMing you my number in a minute mate..lol)

[AB]

Who did what now...lol

What does he want 3 utes for Doggy?

[Woof]

There is a comp coming up and he has only got 4 at the moment....lolol

[69darocket]

yeah mate i have both windows if your interested. i move over to perth and should be there around the 17th of dec if you'd like me to bring them over ? or i can post them if you need them asap

[suvrd28]

Hi i am after a auto box model number RE4R03A thats in useable condition in the sydney area will travel a few hours from sydney if required.

[NissanGQ4.2]

Hi i am after a auto box model number RE4R03A thats in useable condition in the sydney area will travel a few hours from sydney if required.

Good luck finding one mate, I'd sell you mine buts its in a trillion bits at the moment!

[Warnie]

Hey guys,

My passengers seat belt packed it in yesterday and I am in need of another one. Has anyone got one for me in Brisbane???

PM me on here if you can help out.

Cheers guys, Adam

[Timmo]

im after any type of packing boxes as im moving to a new house............

[molongmick]

I've got plenty, but you'll need to come and get them. I live in NSW, it might be cheaper to buy some though.

Check with places like office works or McDonalds as they often throw away many good boxes suitable for packing.

[paul990]

QLD

Hi all, i need to replace my 88 lwb diesel body as it has a heap of little brown fellas holding hands across certain parts.

I'm located just outside toowoomba but can travel for the right body / roller/ complete Patrol / Maverick with issues eg; blown head , gearbox probs etc.

any info please send me a PM

Thanks

Paul

[Cameronero]

Guys, recently bought an old MK patrol thats a bit rough on the inside including the cowling covering the steering column / ignition missing.

Interior is Blue.

If anyone has an old MQ/MK sitting around that they are looking to wreck or part-out that has a Blue interior and an intact steering column/ignition cowling that they are willing to let go of, please reply in thread or PM me.

Thanks,

Lyle

[m1n1s1n]

RB30s with good k's!

Im in victoria!

[Finly Owner]

Guys, recently bought an old MK patrol thats a bit rough on the inside including the cowling covering the steering column / ignition missing.

Interior is Blue.

If anyone has an old MQ/MK sitting around that they are looking to wreck or part-out that has a Blue interior and an intact steering column/ignition cowling that they are willing to let go of, please reply in thread or PM me.

Thanks,

Lyle
Would help if we knew where you were. But, anyway, I have all that you need.

Tim

[Cameronero]

I'm located in Canberra.

[Finly Owner]

I'm located in Canberra.have answered ur pm


Tim

[fuzznut06]

hi all i am arfter steel side steps to fit gq lwb 90 model

[Finly Owner]

I have a pair, but I can't get them to you through Aussie Post as they are too long.



Tim

[fuzznut06]

hi tim i mite b abell to get them down to melbourne are thay steel mate and if so haw much do you want for them
regards fuzznut

[Finly Owner]

hi tim i mite b abell to get them down to melbourne are thay steel mate and if so haw much do you want for them
regards fuzznut
I reckon a hundred would be good.

check out this too.
http://www.nissanpatrol.com.au/forums/showthread.php?6296-nissan-patrol-gu-side-steps


Tim

[chrissey]

Hey guys long time no speak. I am still on the road and now stuck in Perth with a dead alternator.
Problem: its a 24 volt Safari, i had a quote over 350$ for a second hand one of a wrecker but think that is quite deer?!?
Does anyone have a 24v alternator for a TD42 sitting around, 89 Nissan Safari or you guys think 350 is a good deal?


I know this doesnt belong in this section but about how much should I sell my GQ Safari for, its only got 180.000 k on the clock runs smooth and got the beautiful 4.2 ltr Diesel engine. We think about buying a smaller 4wd as we have never taken it into serious 4wdriving!

Thanks
Chris

[chrissey]

Hey guys long time no speak. I am still on the road and now stuck in Perth with a dead alternator.
Problem: its a 24 volt Safari, i had a quote over 350$ for a second hand one of a wrecker but think that is quite deer?!?
Does anyone have a 24v alternator for a TD42 sitting around, 89 Nissan Safari or you guys think 350 is a good deal?


I know this doesnt belong in this section but about how much should I sell my GQ Safari for, its only got 180.000 k on the clock runs smooth and got the beautiful 4.2 ltr Diesel engine. We think about buying a smaller 4wd as we have never taken it into serious 4wdriving!

Thanks
Chris

Problem solved, wasnt the alternator glad I went to another garage i had a feeling the first guy was a bit dodgy puuuuh.
Cheers Chris

[patch697]

Good to here....... You have to use your better judgement at times when dealing with some ppl.

[kennc87]

Gday,

Just chasing a winch bar for my SWB Mav. Any reasonable condition is fine. Send me a message if you can help.

Kenn.

[Dhuck]

So what did the issue end up being?

[GreaseMonkee]

Need a rear vision mirror base, the one that is screwed to the roof and then the mirror screws to it, if anyone can help that would be much appreciated.....

cheers :cheers:

GM

[Bigrig]

Need a rear vision mirror base, the one that is screwed to the roof and then the mirror screws to it, if anyone can help that would be much appreciated.....

cheers :cheers:

GM

I got mine from Patrolapart in Melbourne mate (www.patrolapart.com.au) - from memory about $20 or thereabouts ...

[NissanGQ4.2]

fleabay has them for 26 bucks

http://www.ebay.com.au/itm/ws/eBayISAPI.dll?ViewItem&item=160641872240&clk_rvr_id=272731624624

Hope that helps

Cheers

Todd

[GreaseMonkee]

Awesome, thanks guys......!

[Nordic]

Hi guys,

i´m after a 2" inch lift kit (Shocker and Spring´s), so if someone want´s to get rid of a used or new kit, let it me know.

Also i thinking to get an alloy Radiator with double trans cooler for my GQ...

It´s a 91 GQ LWB 4.2 Auto

Cheers
Nordic

(Melbourne area)

[GreaseMonkee]

Thanks for that BigRig, nice quick sale for www.patrolapart.com.au....

[69darocket]

Yeah mate I have some and im down in melb at the start of dec. Happy for a hundred. Let us know and ill send you some pics if your interested.

[MudRunnerTD]

Or just try Nissan mate, i think i paid $15 or $20 direct for them a few years ago.

[GreaseMonkee]

Was going to do that MR, but is a 130klm round trip and time off work as their spares not open on weekends lol online is best option as by the time I pay for diesel it will be more than online with post.... ;)

[albi]

i need a clutch fork and throw out bearing carrier for an
gq patrol,none in newy new or second hand????????????

[the ferret]

i need a clutch fork and throw out bearing carrier for an
gq patrol,none in newy new or second hand????????????
Try some of the WA 4x4 wreckers mate, If ya find one I could probably pick it up for ya and post it.There are a few south of the river, mandurah is best for me lol
Cheers the ferret

[Warnie]

Found thanks guys

[AB]

Found thanks guys

Damn, that was quick...lol

[Warnie]

Yeah it was only took 2 weeks lol. Oh well, its in the car now

[Maxhead]

I'm after a 12 foot tinny cartopper with a 15 hp motor.
If it's on the trailer , that no problems . I'll pick it up if it's close
Anyone interested with one let me know.\
I need one to put on top of my truck for a trip up north next year.

Just to add , if any one has roof racks with a roller at the back..........let me know


Anyone????

[Maxhead]

Holly shit any one???

EDIT: hello everone with a tinny

[Clunk]

Holly shit any one???

EDIT: hello everone with a tinny

whatttttttt a whole 15 minutes was tooo long for a reply!!!!?????? hahahahahaha

Sorry mate can't help ya....... as always!!!!lmao

[the evil twin]

Good News is... I have a 12 foot tinny, 15 Johnno, Folding trailer, Sounder, Beach wheels and roof rollers for sale

$1,500

Bad News is... I live in Rockingham W.A.

[Clunk]

Good News is... I have a 12 foot tinny, 15 Johnno, Folding trailer, Sounder, Beach wheels and roof rollers for sale

$1,500

Bad News is... I live in Rockingham W.A.

oooh you're such a tease ET!!!!! lol

[gec]

I also have one for sale and I'm in Geraldton

[Clunk]

ooooh I say, this is just like waiting for a bus................................ hahahahaha

[Maxhead]

Good News is... I have a 12 foot tinny, 15 Johnno, Folding trailer, Sounder, Beach wheels and roof rollers for sale

$1,500

Bad News is... I live in Rockingham W.A.


I also have one for sale and I'm in Geraldton

Ok, I think you guys need a holiday on the eastern side of OZ...much better here...LOL

[Maxhead]

whatttttttt a whole 15 minutes was tooo long for a reply!!!!?????? hahahahahaha



Hahhahahha, Just noticed that...lololololo
Twas a good night...lol

BUMP!

[Raydar PC]

Hi wanting to buy a starter motor for 1987 MQ nissan patrol diesel urgent contact me via PM if you can help.

[Woof]

It is always a good idea to post up an introduction before asking for anything mate, gets everyone on side.

[GQRD28T]

Hi wanting to buy a starter motor for 1987 MQ nissan patrol diesel urgent

where are you located? 12V? I have entire SD33 engine 24V setup, was reconditioned a few years back, did just over 30,000km, and is now sitting on a pallet in the shed. came out of 1981 MQ 4speed.

[Raydar PC]

firstly sorry i forget the introduction I am just a newby to this .... any just bought my first patrol need to fix a few things before rwc and rego
cheers and once again sorry to everyone on here

[Raydar PC]

where are you located? 12V? I have entire SD33 engine 24V setup, was reconditioned a few years back, did just over 30,000km, and is now sitting on a pallet in the shed. came out of 1981 MQ 4speed.

I am in queensland and it is a 12v and how much for your sd33

[Woof]

firstly sorry i forget the introduction I am just a newby to this .... any just bought my first patrol need to fix a few things before rwc and rego
cheers and once again sorry to everyone on here

Not a problem mate, it's all good

[MudRunnerTD]

Hey Plas i'm good for a bit of a spit mate but not sure that will do the job. I have been known to lay a reasonable weld that has stood the test of time but i aint no Boiler Maker mate. If i can help just yell out bud.

[MudRunnerTD]

I have been wanting to buy one hehehehe

I would likely be able to borrow my father inlaws for a day mate he has a 200amp Mig that i did my rear bar and roof lights with. Sure he would not mind?? I think? lol

[MudRunnerTD]

I agree, see if you cant find a Pro, if not then between the two of us we must be able to get it done. We aint no Dills.

****No smart comments from the rest a ya. :p

[bazz61]

any one got contacts to supply and fit turbo in SA, Adelaide, thanx Barry

[AB]

Hi mate, I haven't got any contacts over there but if you are considering doing this yourself then have a read of this below...

http://www.nissanpatrol.com.au/forums/showthread.php?4973-Fitting-a-genuine-Nissan-turbo-to-a-N-A-TD42

[Finly Owner]

I am in queensland and it is a 12v and how much for your sd33
Where in Qld? I may be able to help



Tim

[macca]

Been changing things around and have ended up with switches moved to allow for more mods and the blanks have holes in the wrong places.
Need 3 if I can get them.
Also after an armrest for a DX, previous owner must of stood on mine as its that bad.
Hoping I get lucky.
Thanks,
Macca

[nowoolies]

Been changing things around and have ended up with switches moved to allow for more mods and the blanks have holes in the wrong places.
Need 3 if I can get them.
Also after an armrest for a DX, previous owner must of stood on mine as its that bad.
Hoping I get lucky.
Thanks,
Macca

g`day mate
are they the oblong ones your after?????
if so i have a few after putting switches in my dash

[macca]

PM sent
Thanks
Macca

[macca]

Paul my phone might accept photos but I think it's barred, the insert / blank with the 2 push buttons needs replacing it will have a larger push button / pot in the centre so should be sweet to recycle what you have. Its that size I am after,

http://i254.photobucket.com/albums/hh94/maccas01/Nissan%20builds/IMG_3220.jpg

Thanks Macca

[nowoolies]

Paul my phone might accept photos but I think it's barred, the insert / blank with the 2 push buttons needs replacing it will have a larger push button / pot in the centre so should be sweet to recycle what you have. Its that size I am after,

http://i254.photobucket.com/albums/hh94/maccas01/Nissan%20builds/IMG_3220.jpg

Thanks Macca

thats the ones i have
pm me your address and ill post them to you mate

[Ben-e-boy]

hi all

As stated in the title i'm after an intake manifold for a td42

Cheers
Benny

[AB]

I have the top pipe and flange you can have for nothing but not the actual manifold unfortunately.

[NissanGQ4.2]

i assume u are after a second hand one and not a brand new one?

[shaunh]

hey fellas im in need on a few parts for my car for rego
im chasing a coolant overflow bottle,
front blinkers both sides,
a in dash vent surround for the lhs vent
a lhs lower trailing arm
a drivers seat,
few odds and bobs
the screw for the jack cover plate, a lever for the middle row seats and a window winder
located in lismore nsw 2480
all parts for a 1989 mav 4.2 carb

[Rellbell]

I got one brand new for $280.
Cheers to all.
Tim

Do tell where you got the bargain. Cheers rellbell

[Ben-e-boy]

Cheers AB I just after manifold I'm going to cut the top of it out and make a custom plenum

Todd, How much is a brand new one??

[YNOT]

Intake manifold Todd.

Tony

[NissanGQ4.2]

Intake manifold Todd.

Tony

hahaha Thanks Tony Didn't read it properly............sorry Benny

[AB]

Ive got this non turbo TD42 manifold if anyone wants it too...No charge, just postage.

[YNOT]

Ive got this non turbo TD42 manifold if anyone wants it too...No charge, just postage.

Inlet or exhaust?

Tony

[AB]

Just the exhaust.

[katwoman]

Am after a bonnet with the scoop in any condition, for a little experimenting.
I'll call wreckers next week, but no-one has one laying around, by any chance ?
PM me here...
cheers

[nowoolies]

posted today mate
hope they are right

[AB]

Nicely done mate, good to have a sound network on here!!!

[macca]

Nicely done mate, good to have a sound network on here!!!

Paul was onto this so quick, you are right about a sound network there Andy

Thanks Paul really appreciate your generosity, one day I hope to do the same for you or another member here

Macca

[nowoolies]

nowoolies mate
ill have a look during the week im sure i got at least 2 more if you want them ....if i can find them that is hahahaha

[macca]

Mate what you have sent me will be fine thanks, you have been more than helpfull.
Macca

[nowoolies]

Mate what you have sent me will be fine thanks, you have been more than helpfull.
Macca

nowoolies mate
glad i was able to help

[macca]

Got a little package in the mail box today, thank you kind sir.
You are No 1 :first:

[Arwon]

If anyone has a set of 2008 wagon side steps in good condition for sale, pls let me know. Thanks


Sent from my iPhone. Please excuse the spelling.

[Clunk]

G'day Arwon, sorry I can't help but maybe one of the other members can. Usually helps to say where abouts you are too mate............... when you get the chance drop in and introduce yourself in the Intros section, just gets everyone onside mate. Hope you find what you're looking for.

[Ben-e-boy]

Hi everyone
I am chasing a set of 33 inch tyres. dosnt have to be on rims, any brand, must have road legal tread.
Cheers
Ben

[Mugsy]

hey guys

im after a winch bar & roof cage

if anyone is selling one or knows where i can get either dirt cheap would be great

:)

[Maxhead]

For which model mate?

[cliff]

Where abouts are you champ!?

[YNOT]

Where abouts are you champ!?

He's Brisbane northside somewhere from memory, so not far from you Cliff.

Tony

[cliff]

You have a PM, ben-e-boy!!!

[boggy2006]

hi,

I'm after the above with no tears (for roadworthy), please pm me. Preferably around Melbourne/west, but can travel.

Thanks

[Mugsy]

sorry mate GQ

[twinotter600]

Looking for a few GQ cup holders that are a affordable.

[gec]

I have done this to my GQ, It is very affordable and very efficient as you can have you can in a stubby cooler as well, will also take 600ml bottles without the cooler.

http://i327.photobucket.com/albums/k452/BeniMan_08/031-1.jpg

[twinotter600]

Thanks but I am looking for the originals.

[twinotter600]

I'll take your rear stab disconnect sticker in English! Mine are in Japanese.

[Clunk]

You can find them on eBay but not very cheap

[frenzy]

I have done this to my GQ, It is very affordable and very efficient as you can have you can in a stubby cooler as well, will also take 600ml bottles without the cooler.

http://i327.photobucket.com/albums/k452/BeniMan_08/031-1.jpg

Top idea there mate!

[DX grunt]

Looking for a few GQ cup holders that are a affordable.



http://i1015.photobucket.com/albums/af279/DXgrunt/redneck_engineering_10.jpg

Warning: Do not put hot drinks in this cup holder.

Sorry, I couldn't help myself with this picture. It was a joke I played on someone.

Take care out there, and hope you find an original.

Rossco

[growler2058]

Rossco it was for a GQ mate hahahahhaha

sorry hijack

[twinotter600]

You can find them on eBay but not very cheap

Iknow and Nissan has them as well but $$$$

[portal pat]

As above-going to buckets in a DX coilcab. Please PM if you can help.

[NissanGQ4.2]

Hi all,

Chasing rear Drivers side and Passenger side electric window motors,

If anyone has any lying around and wants to sell them, please let me know.

Cheers

Todd

[Ade]

Mmmm..I got 2 of them in my garage. But I reckon it would be better if you could get it from within the Australia hey..

[NissanGQ4.2]

Mmmm..I got 2 of them in my garage. But I reckon it would be better if you could get it from within the Australia hey..

Thanks anyway mate, I try and source them here. I missed 2 that went on ebay a couple of nights ago :(

[maque]

hi mate ive been bought some parts through internet. try to find on ebay or at stylintrucks. they have a cheap parts.


_________________
sale Nissan Truck Parts (http://www.stylintrucks.com/vehicles/nissan.aspx)

[Skull]

trading in my truck and need some hubs to swap out my avm ones. Don't need to be any good. Just gotta hold in the bearing grease.

[Bigrig]

Wreckers mate - make them half decent though as I'd be p!ssed off if I just bought the rig from you and on my first venture out the hubs let go ...

Good luck with finding a set.

[YNOT]

You can buy brand new aftermarket hubs on EBay for $135, so watch what wreckers charge for second hand.

http://www.ebay.com.au/itm/PAIR-GQ-MAVERICK-GU-NISSAN-PATROL-FREE-WHEELING-LOCKING-HUBS-WHEEL-HUB-ARB-4X4-/130593594680?pt=AU_Car_Parts_Accessories&hash=item1e67fc1d38

Tony

[Dozer]

ya might be able to fix em? just repaired mine and did a basic write up with pics here: patrol4x4.com/forum/members-nissan-patrols-19/td42-turbo-gq-lwb-74900

Could be the bushes arent in the right place ect.

NOTE: DIRECT LINKS HAVE BEEN REMOVED DUE TO PATROL4X4's VIRUS PROBLEMS, ENTERING THE ABOVE LINK INTO YOUR BROWSER YOU DO AT YOUR OWN RISK

KIND REGARDS

FORUM MANAGEMENT

[Skull]

I spotted those on ebay. was hopin to get some local but i will buy them if needed to get mine off before trade. my new truck is here end of the month so still have a lil time.

[NissanGQ4.2]

ya might be able to fix em? just repaired mine and did a basic write up with pics here

Thanks for the link mate, nice write up :)

I think I just need new brushes in mine, but have not been able to source any new ones. And really don't know who would do them if anybody. The motors are built very well, was surprised they could be stripped down completely.

I know its not an electrical problem as I have already tested all that......

[Finly Owner]

Where is Rockingham?


Tim

[Skull]

Below Perth, WA. Don't feel bad. I had no idea till I got here.

[anwarg]

Hi,

Does anyone know where I could purchase a roof bin for my GU. I am in Brisbane.

Regards

AG

[DX grunt]

More info please. How big, method of securing it to the roof, ect.

You can get ones that fit over your spare wheel, too.

Rossco

[Sir Roofy]

one for the spare wheel would be much easier
most 4x4 outlets carry them