MB (26th April 2021)
Plasnart (27th April 2021)
Finally back up to our little coupe today to run some post summer tests:
Happy days, sapwood is running wet early and the Iron-bark is nearly popping off with a bit of encouragement
Time to get real busy this winter/spring ahead to regain some coin from the debacles of Covid 2020!
Oh......and Irish-Pork sausages from our new hometown butcher out there were deliciously happy on the Coleman Hyperflamey
Sent from my iPhone using Tapatalk
AB (27th April 2021), BrazilianY60 (5th May 2021), Cremulator (27th April 2021), Plasnart (27th April 2021), Rossco (27th April 2021), rusty_nail (27th April 2021)
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
MB (27th April 2021)
AB’s Old ‘Mongrel’ is still going strong Mate....but full of Arachnids
we’ll have to drop a bug bomb in cab before tomorrows haul out, especially after tonight’s special Straya Spooky Moon
https://www.google.com.au/amp/s/amp....icle/100066644
Even the little trailers King’s Fluro Orange rope is spooked and has turned white
Sent from my iPhone using Tapatalk
AB (27th April 2021), Plasnart (27th April 2021), Rossco (27th April 2021), rusty_nail (27th April 2021)
Finally have some action happening with our deck! Couldn't get somebody to do the work for us so we did it ourselves.
Sent from my SM-G986B using Tapatalk
Cremulator (2nd May 2021), jay see (2nd May 2021), Maxhead (3rd May 2021), MB (4th May 2021), mudnut (1st May 2021), nissannewby (1st May 2021), PeeBee (1st May 2021), Plasnart (1st May 2021), Rossco (2nd May 2021), rusty_nail (1st May 2021), Touses (4th May 2021)
Cremulator (2nd May 2021), MB (4th May 2021), pearcey (2nd May 2021), PeeBee (2nd May 2021), rusty_nail (1st May 2021), Winnie (1st May 2021)
Good on you Winnie, the last big deck I built I did the holes by hand, but was younger and stronger then, not today, someone else can do it and all I have to do is lift the index finger and punch the phone to transfer the money. How did you go operating the digger - first time or used it before - might have a requirement on the new block for one.
Yeah these holes had to be 450mm wide and 600mm deep, there are 21 holes so for $300 I'm happy hiring the machine!
It was my first time using something like that but it was so easy to use. They did not give me a run down on it and within 10 mins I was a pro.
Sent from my SM-G986B using Tapatalk
Cremulator (2nd May 2021), PeeBee (2nd May 2021)