So I started stuffing around with adding an external switch. Piss farting around trying to find a good discreet spot for the switch. Rummaging through my box of lecky bits and I found this.
Attachment 81690
Kinda forgot all about it.
So I ditched the switch idea and turned my thoughts to this.
It’s made for VRS winches, having all the correct plugs to fit. Got the side cutters out and lopped them off and grafted it in to the Patrol.
All works as it should.
But now I’ve decided to remake an entire new engine bay loom from the relay box.
As I had modded the OEM relay box to house all the extra relays I was running.
This pic is what it was like. Tons of spare spaces.
Attachment 81692
Fast foward to the final mod.
Attachment 81691
Attachment 81693
But, this mod was done what I had projected HID light with LED angel eyes and blue Devils eyes. These are now gone so I still have the relays connected. So I will remove the relay box and rewire it again so I can use these relays for something else.
A big can of worms I think I have opened up. Rewiring this relay box was a BIG job...
Sent from my iPhone using Tapatalk