Installing an Electric pump to assist the Ip

[Sprock]

Mine is about where you’re is @First Pooy & I’ve never had a drama with mine mate

[First Pooy]

Thanks for the feed back Sprock it is good to hear from someone who has ready mounted it in a similar position and it works fine.

[mudski]

Found these pics of when I installed mine. Been there for 3 or so years without a hitch. I have the earth of the pump connected to the oil pressure switch so the pump will only turn on when theres oil pressure.
20151120_110125 (Small).jpgFL7CSn.jpg9rngoz.jpg

Now sitting behind this sheet of rubber.
IMG_2146.jpg

[First Pooy]

Are you referring to a safety cut off switch to turn the pump off when there is no oil pressure, I brought a separate one then the standard oil pressure switch which is useless they turn on when the damage is already done.

[mudski]

Are you referring to a safety cut off switch to turn the pump off when there is no oil pressure, I brought a separate one then the standard oil pressure switch which is useless they turn on when the damage is already done.

No. Just wired the earth of the pump to the factory oil Pressure switch itself. As that’s only an earth wire going to the switch. Works perfectly for me.


Sent from my iPhone using Tapatalk