So now I have to wait until ARB get my bits in. I hate waiting....
So I’ve pulled the dash apart and will start on the in cab wiring of the isolator and winch in/out switch.
Looking at the back on the in/out switch there’s too many pins, 7 of them. Lol. Anyone have a wiring diagram for this part?
Adjustments.jpg
IMG_2975.jpg
Sent from my iPhone using Tapatalk
I’m going to move my light bar and spotties switch to down on the gear shift console too so the winch switches will be in the best spot.
Adjustments.jpg
Sent from my iPhone using Tapatalk
Rossco (26th May 2020)
https://www.facebook.com/groups/1444...8026831490128/
Sent from my CPH1979 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
mudski (26th May 2020)
Yeah think I just sketched it all before I did it to get my head around it all. Trailer wire should be fine, don't need any relays big solenoid does everything. Worth thinking about when you do it is putting buttons up front on the bar very very handy and also some strip lighting above the winch which picks up power fron the isolator, very handy in the dark obviusly. . .
Sent from my SM-G930F using Tapatalk
Yep buttons on the bar are a must! I left them out and really regret it, running out the winch rope solo is a mission now. Need to find some motivation to add them in.
A light above the winch that illuminates when you activate the in cab isolation switch is also a bloody good idea too, I didn't do that either damn it.
Sent from my SM-G960F using Tapatalk
Rossco (27th May 2020)