Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Created the mould by covering ipad in alfoil layering it in painters tape then smearing mould release over the top. Waited a couple of hours and released the ipad from the mould.
Test fitted on dash where i wanted it then trimmed the dash down to suit, used epoxy glue to hold it in place and trimmed off the excess fibreglass.
Used car filler to create the shape and sanded for a week added primer then sanded some more and repeated.
The Following 7 Users Say Thank You to Wilkie_4x4 For This Useful Post:
AB (24th November 2018), Clunk (5th December 2018), Cremulator (27th November 2018), GQtdauto (24th November 2018), jack (23rd November 2018), NissanGQ4.2 (24th November 2018), Plasnart (27th November 2018)
Reply With Quote