-
6th September 2018, 04:17 PM
#11
Originally Posted by
mudski
Ah yeah. Coupla stubbies mate and its done. Scamming you for sure if he's just blocking the EGR. Its simple. Remove the intercooler, on the RHS of the motor, a cast pipe come up from the EGR valve, and bolts direct onto the intake manifold with two bolts. Undo the two bolts, drop the gasket out and put in the blanking plate, bolt everything back up and its done.
Thats it!!!
Cheers! I'll just do it myself and then get the head checked somewhere just incase
-
-
6th September 2018 04:17 PM
# ADS
Circuit advertisement
-
6th September 2018, 05:03 PM
#12
The master farter
Originally Posted by
Ali36
Cheers! I'll just do it myself and then get the head checked somewhere just incase
Yeah its not hard to do at all. The CRD motors are a bit harder, more fidly than anything.
-