The steering damper thread

[threedogs]

Seems EFS give 3 years /100,000k warranty.
mine is just out of that warranty period, damn
TJM want $100-$120 for their one cant see where
that price is warranted as most others are half that
price. Maybe paying for the name a bit as well.
TBH I would have hoped it would last a lot longer
than what it did. I;ll see whats available on Ebay, lol

http://www.ebay.com.au/itm/Foam-Cell...oAAOSwcOFWaUul

[threedogs]

Ok Ive let this slip for a few months . I cant seem to get the old one off
Stropp suggested to use the jack but the angle is all wrong. Im thinking
I need a tie rod fork to break the seal,, so to speak, Ive tried a big hammer
to no avail

http://www.ebay.com.au/itm/200mm-8-B...cAAOSwPYZU4tRu

[Clunk]

Use a bigger hammer

[LostBenji]

The factory suckers are in tighter than a nun's nasty. We used a lot of heat, bearing pullers and big hammers (use one a dolly to put mass behind bar, use other smaller hammer to smack the sucker) to eventually get it.

[threedogs]

Will re try with my tongue hanging out the left and see if that works. lol

[mudski]

The factory suckers are in tighter than a nun's nasty. We used a lot of heat, bearing pullers and big hammers (use one a dolly to put mass behind bar, use other smaller hammer to smack the sucker) to eventually get it.

All for a steering damper?

Sent from my SM-P600 using Tapatalk

[Sir Roofy]

Seems EFS give 3 years /100,000k warranty.
mine is just out of that warranty period, damn
TJM want $100-$120 for their one cant see where
that price is warranted as most others are half that
price. Maybe paying for the name a bit as well.
TBH I would have hoped it would last a lot longer
than what it did. I;ll see whats available on Ebay, lol

http://www.ebay.com.au/itm/Foam-Cell...oAAOSwcOFWaUul

Cant be warn out you don't go
any where except the Murray
and lying on the cement and
swinging a hammer well your
back must have improved a
fair bit

[Robo]

If the standard steering dampers gone to nissan heaven maybe time to replace the std steer link and ball joints also.

[jay see]

When I replaced my original one of some 18 years I don't recall having that much of an issue trying to get it off and I'm no Powerhouse.

Sent from my XT1033

[taslucas]

Pretty sure mine is the original one. It's sloppy as and has oil seeping around it. She'll be fine!

I'd say save your money up for the head problems.

>>>tappin from tassie