OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 6 of 6

Thread: Engine light

  1. #1
    Beginner
    Join Date
    Dec 2015
    Location
    Hillston
    Posts
    5
    Thanks
    0
    Thanked 2 Times in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Engine light

    Ok guys I know there are engine light problems here already but I'm not hugely mechanical so I need to go from the start.. My engine is a ZD30, the engine light came on the other day so going by the owners manual I checked for water in the fuel filter and replaced filter to be sure but light is still on and has serious lag until around 1500-2000rpm. Any ideas what I can try before it goes to the shop. Thanks guys

  2. #2
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,635
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    As much as Id hate to say it but disconnect the battery for a while to re set the ECU
    and clean the MAF sensor.
    Do you know what boost you are acheiving??

    EDIT the MAF sensor is just next to the air cleaner box
    you'll need a torx size 20 tool to remove it.
    Spray over a white rags to see any dirt.
    Sounds like you need to NADS your ZD30
    Last edited by threedogs; 27th December 2015 at 09:23 AM.
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  3. #3
    Banned
    Join Date
    Apr 2011
    Location
    Greenbank QLD
    Posts
    3,387
    Thanks
    561
    Thanked 1,547 Times in 1,116 Posts
    Mentioned
    25 Post(s)
    Tagged
    1 Thread(s)
    If there's no water or air in the fuel system. The next step is to check for fault codes (DTCs). This can either be done by flashing the codes or getting someone like Super Cheap to read them for you.

  4. #4
    Expert
    Join Date
    Dec 2015
    Location
    WA
    Posts
    317
    Thanks
    5
    Thanked 186 Times in 136 Posts
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Bhaf87 View Post
    Ok guys I know there are engine light problems here already but I'm not hugely mechanical so I need to go from the start.. My engine is a ZD30, the engine light came on the other day so going by the owners manual I checked for water in the fuel filter and replaced filter to be sure but light is still on and has serious lag until around 1500-2000rpm. Any ideas what I can try before it goes to the shop. Thanks guys
    Does it shudder when you shut down?

  5. #5
    Expert
    Join Date
    Dec 2011
    Location
    Dwellingup, WA
    Posts
    260
    Thanks
    104
    Thanked 76 Times in 47 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    When you remove the sensor don't touch the surface with your fingers, body oil will make it tell lies to the computer, AND you can buy MAF Sensor cleaner in a spray can from most Auto shops, instructions are on the can.

    Quote Originally Posted by threedogs View Post
    As much as Id hate to say it but disconnect the battery for a while to re set the ECU
    and clean the MAF sensor.
    Do you know what boost you are acheiving??

    EDIT the MAF sensor is just next to the air cleaner box
    you'll need a torx size 20 tool to remove it.
    Spray over a white rags to see any dirt.
    Sounds like you need to NADS your ZD30
    Are you ready for Christmas?

  6. #6
    Beginner
    Join Date
    Dec 2015
    Location
    Hillston
    Posts
    5
    Thanks
    0
    Thanked 2 Times in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    So just to let you know what the problem was.. MAF sensor was faulty

  7. The Following 2 Users Say Thank You to Bhaf87 For This Useful Post:

    Jimbo-AU (25th July 2016), Sprock (15th January 2016)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •