What did you do to your Patrol today!

[mudski]

Finally got the front air locker installed, took a week to get a locker, I can't believe arb doing a locker special and having no stock of either the locker or compressor!

Please add this in your mile long sig of mods you have please. Lol Or you run out of text?

[Stropp]

Please add this in your mile long sig of mods you have please. Lol Or you run out of text?

just to keep you happy mate

[Bacho86]

Booked the Patrol in at ATOC to get the rear main seal fixed...

[threedogs]

Please add this in your mile long sig of mods you have please. Lol Or you run out of text?

Hard to say who's longer Cuppa's or stropp's signature.

All my brass 1/8th fittings arrived , now to re do all the dawes plumbing
using that boost adaptor plate that fits under the OE number.

[Stropp]

Hard to say who's longer Cuppa's or stropp's signature.

All my brass 1/8th fittings arrived , now to re do all the dawes plumbing
using that boost adaptor plate that fits under the OE number.

oh mine could be longer but cant be bothered.

[Hodge]

oh mine could be longer but cant be bothered.

The first 20 characters is all that counts .

[Rocket55]

Installed my 4" snorkel today, not sure I'd be in a big hurray to do it again though.

[Bacho86]

Installed my 4" snorkel today, not sure I'd be in a big hurray ro do it again though.

Nice job rocket, looks sweet! Were there issues with the snorkel or just a PITA to install? How the other mods coming along now...very envious of your shopping list! Lol

Edit: just read the detailed post on your build thread!


Sent from my iPhone using Tapatalk

[Hodge]

Installed my 4" snorkel today, not sure I'd be in a big hurray ro do it again though.

That looks awesome mate. I'm guessing you utilized the existing brackets on the A pillar from previous plastic snorkel? Definite on the to do list.

EDIT: Scratch that question just saw your post in the build thread.

[Rocket55]

Nice job rocket, looks sweet! Were there issues with the snorkel or just a PITA to install? How the other mods coming along now...very envious of your shopping list! Lol

Edit: just read the detailed post on your build thread!


Sent from my iPhone using Tapatalk

Thanks Bacho. It's just the install. The snorkel is a high quality bit of gear, very happy with it and the kit has everything you need to do it. I'd probably make the following comments;

- There's no instructions. Although if you're prepared chop your own guard up with an air hacksaw, then you'll proably be abe to work it out.
- The template doesn't quite line up properly, but I just cut it a tad small then adjusted from there.
- There's 3 x 6mm bolts that go through the A pillar, and there's 3 x 5mm bolts that go into the snorkel and in the kit they gave me 6 x 6mm bolts, so I need to source 3 x 5mm SS bolts (not a big deal)
- The ram head is pretty light and doesn't feel overly strong, see how it goes.

The pipework is good, bends and welds are excellent. The power coat finish is top class. Even the supplied hose clamps are good quality and the A pilar bracket is also great quality.

All in all very happy with it, but unless you've installed them before probably best to allow a bit extra time.