Dawes and Needle valve issues

[Dinger]

Makes sense will do some adjustments and go for a spin.

[threedogs]

1/2 a turn at a time by the sounds of it you are nearlly there, keep at it
you'll turn that frown upside down trust me,,,, he he he

[Dinger]

Cheers mate.
Just did a 25km run 300c at 110km only got 6 psi dont think that should be a problem though. Was a pretty flat road.
Egt never went above 400 even up steep incline about 12 degree. So fairly confident it is in a good place.
I cant thank all that gave me advice enough. You guys are great.

[Dinger]

This is the actuator I removed. Looks nothing like to one I put on looks like it is from a 2.8.

[mudski]

Cheers mate.
Just did a 25km run 300c at 110km only got 6 psi dont think that should be a problem though. Was a pretty flat road.
Egt never went above 400 even up steep incline about 12 degree. So fairly confident it is in a good place.
I cant thank all that gave me advice enough. You guys are great.

110kph boost is too low mate. Get it to around 10-12 and your egts will drop more.

[Dinger]

110kph boost is too low mate. Get it to around 10-12 and your egts will drop more.

Cheers mate. Made some small adjustments got it to 9 psi at 110km. Max is 17psi it is not bouncing to 17 very stable and only if I give it a boot full. EGTs went down to 225c at 110km.

[threedogs]

Cheers mate. Made some small adjustments got it to 9 psi at 110km. Max is 17psi it is not bouncing to 17 very stable and only if I give it a boot full. EGTs went down to 225c at 110km.

Wow mine must be way off, back to fiddling lol

[Dinger]

Wow mine must be way off, back to fiddling lol

What does yours sit at?

[threedogs]

Flat road sitting on 100 ,[mine is an auto]
temp is about 320c

[Dinger]

Flat road sitting on 100 ,[mine is an auto]
temp is about 320c

Mine too.
Did another run today after a minor tweak and it has moved to 290c I pretty happy though.