With the exhaust are you doing turbo back or just from the Cat back??
With the exhaust are you doing turbo back or just from the Cat back??
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
I have just fitted EGR and Dawes set up and gauges to my 08 CRD. Previously fitted catch can and second filter/water trap. Scan gauge will arrive next week to clear the check lightThe Trol is going well. topping out at 18 psi boost and now will pull up my hill in to gear only dropping 5 kmph and apposed to 10 to 15. Cheaper than chipping and better for the engine. Was a bit fiddly until I got my head around what did what and yes I got a bit lost on the way. This forum has a wealth of information at your disposal so read up and ask questions.
Footnote: Very happy with the Trol now after a run to Canberra tonight.
Last edited by Snow Patrol; 15th November 2014 at 10:41 PM.
2008 Patrol 3.0L 2" Raw Nitro Lift, Polyair airbags, Airflow snorkel, Drawers, UHF, Dual battery system and cage scavenged from my Prado Alloy roof basket from the chookyard. Boost and EGT gauges and NADS
1980 MQ Ute (nearly forgot the indestructible farm Ute)
07 crd,,bridgestone 697lt, 2.75 buedesert ex,SOLD theres a lot of my blood, sweat and money in that troll.
92 gq ti tb42efi my brothers gq extractors dual batteries brake controller uhf alloy bullbarSOLD with a heavy heart but gone to a nice young fella
13 y62 the beast that burbles
hybrid (16th November 2014)
I originally had a 3" exhaust cat back, you could feel the difference big time,
then I had a DP chip ,straight through Cat and bigger scoop fitted all at once.
Not a good idea as I couldn't say if there were any huge improvements
You may want to think about getting your ECU re mapped "2trollfam" just had it done
and you cant wipe the smile off Sharen's face
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Well, things are progressing nicely at the mechanic, he pulled off my intercooler and it was full of oil, I'm sooooooo glad I am getting the Catch Can fitted and my car has only 80,000km on it....glad I have taken all the advice you all have provided since joining the forum.![]()
Hodge (20th November 2014)
Just thought I would update you on how everything went . The car seems to have a much more smoother and immediate response in regards to exceleration, the dawes valve has been currently set to 17 psi which seems to be good. The Scan Guage 2 is a great piece of kit with the various readings it give you and being able to clear the fault code from the egr block. The boost and egt guage also has been a great insight to how the car is going. As for the oil catch can, that really is an essential mod for these vehicles. should of done this stuff sooner.
Hodge (27th November 2014)
Good to hear things are going well with the Patrol mate. Dawes and needle need a sweet spot, and once you find it, set it and forget it.
2005 TD42TI
hybrid (27th November 2014)