My replacement remote cost me $130 from memory at Nissan,
the spares guy coded it to my car on the spot, free
some charge for this service,
My replacement remote cost me $130 from memory at Nissan,
the spares guy coded it to my car on the spot, free
some charge for this service,
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
toad_au (24th September 2014)
Really nice to cheers mate
The price varies heaps so ring around
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
For 2006, standard tyres were 275x65 R17, with a factory option for 265x75 R16 (except the DX)
If you have the current (working ) key, most Mr Minit etc will replace the shell, but I suspect they cannot recode the remotes one at a time--according to the Gregorys service and repair manual, you must program ALL door remotes at the same time. If you want the process, I could post it-laborious but doable.
The door remote is not part of the ignition security system--key has two systems.
GU IV 2006; 3.0 DDi ST-S; Nissan Snorkel, Bull Bar and Tow Bar; Warn 8,000# Winch with Dyneema rope; Auber EGT, Boost and dual Battery gauges; Provent 200; Dual Batteries; Three Dogs recovery points; Rear Springs +20% load; Outback drawers and Cargo Barrier; UHF; [GPS, Radio, CD, Bluetooth, SD, USB] floor extension; Alloy roof rack
"Smart people know what they don't know"
toad_au (26th September 2014)
Don't want to hijack thread, but my 1998 GU has central locking, but came with no remotes.
Would it have had remotes from factory when brand new?
Evo
Cheers,
Evo
Evo (27th September 2014)
Evo (27th September 2014)
Evo (27th September 2014)