Installing WRX front mount intercooler with 3" pipe to GQ

[AB]

Pics or it didn't happen. ..

...........

[Bloodyaussie]

1407493703952.jpg
Right back at ya!!!

[Clunk]

1407493703952.jpg
Right back at ya!!!

Jeez you guys have got stubby fingers

[AB]

Jeez you guys have got stubby fingers

Looking at our photos I look like ET phone home and ba is the missing link... Lol

[Clunk]

All the better for picking your nose with

[AB]

So getting back on track there must be a very fine line in holding that arm back enough to hold more boost without too much where it can't release causing spikes and potential damage yeah?

Considering I pushed an extra mm or two in the recommendation I was told.

[krbrooking]

Good to hear Andy bet you are happy it is done.

Sent from me using Forum Runner

[Rossco]

Good work, took a fair bit of perseverance but sounds like it came up well in the end.

Thinking I might start farting round with my high mount this weekend if you want to compare it to your set up with the'"IC".

[AB]

Good work, took a fair bit of perseverance but sounds like it came up well in the end.

Thinking I might start farting round with my high mount this weekend if you want to compare it to your set up with the'"IC".

Sounds good mate, ill give you a buzz...

[Winnie]

Just put up a photo already!