I just say "no worries, you're welcome" and smile when they lookOriginally Posted by filthyrich
I just say "no worries, you're welcome" and smile when they look
Hello from Under Down Under!
Reading the post today that Scotty / BigRig has left the forum .
The price of excellence is dicipline , the cost of mediocrity is dissapointment .
DX grunt (3rd September 2013), NissanGQ4.2 (4th September 2013), rusty_nail (3rd September 2013)
Yeah kinda sad huh! Bigrig if Ur lurking come back!!! We miss the smiles u bring to this forum!!!
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
boots (3rd September 2013), NissanGQ4.2 (4th September 2013)
My guess is it has something to do with the airbox/intake. I think it has to do with the pressure of the air inside the intake when you are gassing is quite high, then when you lift off you are taking all the fuel out and mucking up the air fuel ratios. I know on real cars that are on gas, patrols, you need to fit an equalizing pipe to the intake to stop it doing that.
1999 GU DUAL FUEL 4.5 - 2" OME - 33's KM2s - SNORKEL - CUSTOM DINTS.... Goes by the name Candy (the car not me)
NissanGQ4.2 (4th September 2013)
Not sure if this has already been said but you need to send this to 4x4 Victoria , they will let the right people know.
Did not make me angry but bloody hurt .
For those that use brushcutter and mower without protection take note, I have done many other things but yhis one was weird. .. it was just a small piece of weeds but went a full Centre meter into my shin.
1378278405433.jpg
Did not know it was there till I got home and god it hurt when I pulled it out.
BigRAWesty (4th September 2013)
Looks almost as bad as the paper cut I got at work today.
BigRAWesty (4th September 2013)
Oh funny. ..... so your risk of death at work is from a killer printer!!!
It doesn't backfire when lifting the foot but the other way around.........back off then put the foot down.......BANG!!!!!!!!!
But could be the same thing, will start with leads, plugs and cleaning the maff sensor.
Maff sensor I dare say needs a good clean as when I bought it the air box was blown and there was no air filter there!!! Have replaced the air box and put a filter in.
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
I do get to mine sites and building sites and climb the occasional tower but hurt myself more often in the office. (probably on purpose to stop the boredom)
Don't underestimate those killer printers, they know when your back is turned.
Posting Permissions
Reply With Quote