Go get hugged jonoOriginally Posted by Bloodyaussie
FanTapstic!
Go get hugged jono
FanTapstic!
Hello from Under Down Under!
You cant rush perfection mate!
He doesn't know it but i'm going to get my gym junky brother whos 6'1 to give him a cuddle !! Lmao
BigRAWesty (9th May 2013)
Heres some pics.
Got a bolt off a mate that screwed into the nut but wouldn't go all the way through so the thread was slightly different. Went to bolt shop today and showed them the bolt they said it was 1.75 thread, gave me some with 1.5 thread and the damn things won't screw in as far as the 1.75 I had?
FanTapstic!
Hello from Under Down Under!
Go to the local hardware and get yourself some thread gauges. They are like feeler gauges but with thread pitches etc. get metric and imperial to be safe. Then all your problems will be solvedexcept for that rash. Lol
96 GQ coil/Cab
08 G6eT
Is he saying they are metric ???
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Wouldn't go all the way through the nut or only would get one turn into the thread?
If it goes pretty much all the way through then there won't be much wrong with the size. The nut might be slightly damaged.
yeah i just thought it would have been a lot easier than that. Its got to be such a common size. Annoyed that i had a bolt that was %99 percent right but now im further away!
Hello from Under Down Under!
the one i had that they told me was 1.75 thread would nearly go all the way through the nut. The ones they gave me which they said were 1.5 thread will only get one turn into the nut
Hello from Under Down Under!
most common would be 1/2" unc, thread looks nice and coarse
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Possibly try a 1/2" unc but if you can get it that far through that would be the one I use. If its an M12 we are talking about it would also feel a little sloppy in the thread if the nut was unc
Posting Permissions
Reply With Quote
