did the mod on my GQ. A 3K resistor was a bit too much, gear change from 1-2 was too harsh so settled with a 1.2k resistor. 1-2 ans 3-4 noticeably faster, 2-3 quicker too, but still a bit sluggish. A standard 1/4W resistor worked fine, hardly gets warm.
Not sure if the original position of my 12ohm resistor is standard, but here are some photos showing its location. It was easy just to unplug the harness, fold the legs over on the new resistor and insert it into the harness end connector. A bit of tape over the end wil keep it in place, although you might want to do something more permanent.
Reply With Quote