G'day All

[Crankshaft]

Crankshaft here.. Owner of a G60 for about 20 years and the old beast still goes well and everywhere but is no longer registered.
BUT
Recently purchase TWO Mq shorties to play with one is registerd and with only 140,000 2.8 Petrol and gas. but no extra bits the other is unreg but has all the good stuff- springs, lockers, heavy clutch, new slide windows, extractors, new dizzy, leads, plugs, alternator, SAAS seats, and new BFG's. All the good stuff on a vehicle thats otherwise pretty sad.

So a bit of work and I should end up with a pretty cool toy.

I have the winch and am going to make it portable into Hayman reece hitches.. Front, back and each side.

First job is the clutch but while it is underway and the motor is out probably the extractors

Alan

[AB]

Welcome to the forum mate, keep us informed with how you go and feel free to ask any questions.

[Tweakedoffroad]

G'day mate welcome aboard great bunch with some good info and advice here so feel free to jump in and contribute were you can
Dont forget we love photos here try and take some along the way
Cheers Russ

[45/70]

Welcome Cranky.
Sounds like you will be flat out in the shed for a while, hope it all goes well , dont forget pics.

[growler2058]

G'day Alan welcome aboard mate hits friendly mob here fills great info and advice


Tappin N Crappin

[taslucas]

Gday mate, welcome aboard. Sounds like youve got a nice little project there. You can start a members rides thread if you want, that way we can all watch the progress

[Maxhead]

G'Day and welcome to the forum mate

[Dhuck]

Welcome to the forum mate.