Central locking fault 1993 GQ

[Robo]

hand held gen bracket and gen solenoid in approx position.
This is a broken one I replaced with a aftermarket one.
Also in approx same location.
Cheers

[08IGK]

Thanks Robo, the actuators that I have look nothing like that and when mounted internally in the door they conflict with the window mechanism.

What brand did you end up getting? I may have to shop around by the looks of it as I now have central locking for the front 2 doors but still have to do the rear manually which isn't a problem until you have ballance a child in your arms.

Thanks for your help.

[Yendor]

Thanks Robo, the actuators that I have look nothing like that and when mounted internally in the door they conflict with the window mechanism.

What brand did you end up getting? I may have to shop around by the looks of it as I now have central locking for the front 2 doors but still have to do the rear manually which isn't a problem until you have ballance a child in your arms.

Thanks for your help.

It's a good idea to post an intro in the introduction section, just so we know who we are taking with.

It would also be a good idea to start a new thread, with pictures of your mounting problem.

[cookpa]

sorry no pics but if you look down the snipper hole i mounted it right down the bottom of the door facing up with the rod from the motor pushing and pulling on the snipper rod just above the lock

[Robo]

Post up an intro first, follow forum policy please bro.
cheers

[Robo]

4 door kit.
2 door kit.
Individual parts also available.
Jaycar and JB's
This type of actuator is what I replaced the broken gen nissan 1 with.
Pic is stand alone kit for a car that doesn't have c/lock in the first place.
Can also be hooked to work with alarm systems.