Search:

Hi Folks,

There's been some attacks on various forums lately who run the same software as we do here so I'm doing some updates to avoid any hackers hitting the forum so you may see some...

A bit old.......I bought this

http://www.ebay.com.au/itm/330806733072?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

Sorry again for the delay.
http://www.thelockguy.com.au/

Yes 4by it is Complete mechanical centre in hooppers and theres also INDY AUTOMOTIVE REPAIRS 2/124 KEYS ROAD MOORABIN PH# 9555 8133.

And this is the link to the vehicle modifications guidelines...

It might b a good idea to call the epa testers in hoppers crossing, wen i got epa'd in my rx7 i had to go there to show my car met emmisions the first test cost me about $84 and the second was $40...

I have just built some bolt-on sliders for my GU wagon.

My sliders sit just off the bodywork and are similar in height to the chassis rails. This allows a little flex and protection.
They are...

I found that the slot where the seatbelt went through the top fixture was tight. Cut a strip of sandpaper and inserted between the belt and fixture. Sandpapered and bingo Seatbelt retracted easily....

Yeah good idea for gas.
You can also add a little direct to the petrol tank next time you fill up.
Morreys have cleaner product built in as well as lube qualities.
Problems accure with leaving...

An injector service kit like the link below should have the filter...

Yes, inside dizzy there is a sandwich-plate set up that allows the timing to move.
I have not pulled your dizzy apart , but if you remove cap, rotor and cover plate if it has a plate also, you...