as i bought it
http://i372.photobucket.com/albums/o...0/P1040685.jpg
http://i372.photobucket.com/albums/o...0/P1040682.jpg
http://i372.photobucket.com/albums/o...0/interior.jpg
Printable View
looks good mate nice clean unit for now
Those photo's are not coming up ozzy, you need to select the photobucket image code that starts and finishes with "img".
Tony
to do list:
33's - done
snorkel
tint - done
winch bar
steps/ sliders
3 inch lift done
extractors done
stereo - done
roof basket done
false floor / drawers in back done
turbo
lights
reduction gears
locker
compressor
"insert random other stuff here"
Nice mate look good with some Mickey T's mate :-)
Yep that worked better mate
hi tony they came up clear on my lappyQuote:
Originally Posted by YNOT
after week 1 :)
tint - done
33's - done
http://i372.photobucket.com/albums/o...0/P1040724.jpg
http://i372.photobucket.com/albums/o...0/P1040731.jpg
felt like i was sitting in the back seat that time =======lol
It worked the second time (post #6).Quote:
Originally Posted by roofy
Nice clean Patrol, getting harder to find good ones now.
Tony
looking good there Ozzy, nice one mate
That's a nice GQ mate, love the colour and looks in good nick!
thnx mate. picked it up for a reasonable price i think ( compared to the countless others i looked at before grabbing this 1)
needed rwc, tyres.
got it checked over, few minors under bonnet and i think mechanically, she will be all good :)
hopefully have that sorted this week, and give her some dirt to play in this weekend :)
3 inch lift done :)
[IMG]http://i372.photobucket.com/albums/o...0/P1040734.jpg[/IMG]
http://i372.photobucket.com/albums/o...0/P1040736.jpg
Nice unit mate, and nice stance on it now also!!!
after 2 weeks, finally gets to see some dirt out at ormeau
http://i372.photobucket.com/albums/o...togetdirty.jpg
coming down other side was a lot easier
http://i372.photobucket.com/albums/o...ttingsteep.jpg
hopefully have a vid soon of the hill that stopped the heart a few beats :)
plenty to add, but been slack. Done the roof cage today, cut the bottom of the bullbar last week for more clearance.Harris hardcase diff protection, new windscreen sticker, Stereo etc etc. photos to come.
[IMG]http://i372.photobucket.com/albums/o...0/P1050111.jpg[/IMG]
http://i372.photobucket.com/albums/o...0/P1050105.jpg
http://i372.photobucket.com/albums/o...0/P1050112.jpg
Nice one ozz, I did hear that coronas have a high content of human urine though! Apparently all the Mexicans brewing pee
In as a eff u America hahahahhhahahaa probably an urban
Myth!? Although that could be the reason for the lemon in the top:-)
mexicans must have a lot of alcohol in their urine. That, or i think i need to see a doctor asap :P
I have hahahahhhahahaa and a blood content in me alcohol
Checking out your QG, and thinking Ive seen this tidy beast before... Im Logan bloke as well, in Dasiy Hill.. not far from you at all mate....
began the drawers. The idea is to do these with a budget of $100. ( i don't like my chances, but it's a plan)
so far, ply = $0
I will put together a cut list, maybe even a template and a cost list.
Keep in mind, i am definantly no cabinet maker :P
[IMG]http://i372.photobucket.com/albums/o...emplate1-1.jpg[/IMG]
[IMG]http://i372.photobucket.com/albums/o...2000/base1.jpg[/IMG]
[IMG]http://i372.photobucket.com/albums/o...000/rebate.jpg[/IMG]
[IMG]http://i372.photobucket.com/albums/o...000/walls1.jpg[/IMG]
[IMG]http://i372.photobucket.com/albums/o.../subcutout.jpg[/IMG]
it seems you have been a busy boy today mate... loving all the hard work you doing to it!
day 2
Finished all upright cuts.
Began fascia.
Figured i'd put the base back into the patrol, just to triple check before glue / screw. Lucky i did.
The base covered the child seat bolt by 170mm !!.
Re-cut base / uprights / recessesand we're off again :)
# $43.20 so far. Plywood (free), carpet, screws, carpet glue and wood glue all bought.
# $20.15 for stainless drawer handles
[IMG]http://i372.photobucket.com/albums/o...0/submount.jpg[/IMG]
[IMG]http://i372.photobucket.com/albums/o...0/ampmount.jpg[/IMG]
[IMG]http://i372.photobucket.com/albums/o...0/P1050203.jpg[/IMG]
ozz
couple pics from this morning.
[IMG]http://i372.photobucket.com/albums/o.../subandamp.jpg[/IMG]
[IMG]http://i372.photobucket.com/albums/o...0/ampinbox.jpg[/IMG]
nice looking rig...cant wait to get a winch bar on mine and rip that alloy poo off it
cheers mate.Quote:
Originally Posted by antiskeptic
Yah the bar needs to go, but it is a tad down the priority list at moment. In the mean time, i just cut the bottom bar of it for an extra couple inches clearance
only thing left to do for storage is complete the drawers.
[IMG]http://i372.photobucket.com/albums/o...0/P1050241.jpg[/IMG]
http://i372.photobucket.com/albums/o...0/P1050240.jpg
Great job there mate, looks brilliant
Nice Design mate! Haven't seen that done before.
I have 6x9's in my Troll atm but I just have them in speaker boxes screwed to a shelf. Pain in the butt!
Very very nice, can I book you in @ the QLD meetup :)
Does the drivers side speaker sit further forward than the passengers??? and why is the board cut shorter on the passenger side????
Yes and yes :PQuote:
Originally Posted by NissanGQ4.2
I played around / got it wrong at first. Having a toddler who loves coming for a drive with dad, i wanted to keep access to the child seat latch. Also the amp is on that face side, which throws of a fair bit of heat. so i um ... gave it room to breathe. ( thats my excuse and i'm stickin with it lol ) :P
I was thinking wether or not to even them up, but a longer drawer on drivers side beat what it looks like/ save dead space so i stuck with it.
cheers
small touch ups tomorrow and drawers complete.
Total cost for drawers = $63.80. plus spent some getting wiring done for stereo
[IMG]http://i372.photobucket.com/albums/o...0/P1050247.jpg[/IMG]
Thats a very nice looking setup mate. Very neat :)
Cracking job Oz!!! Come up an absolute treat!!Quote:
Originally Posted by ozzyboy
Looks great mate, love the draw set up.
Hey Ozzyboy. great looking drawers you have made. You have inspired me... one question? did you use drawer runners/slides or did you just make the drawer a tight fit??
Thanks Mate
cheers mate. No draw runners as i tried keeping a budget under 100 bux. the formply slides laminate on laminate.Quote:
Originally Posted by gavinsell
what i did was keep the drawers free from the side walls by approx a inch both sides, incase i changed mind and wanted to run slides / bearrings.
The face of the drawer ( where the handles are) i made tight to stop from sliding (mostly works :P )
ozz