Attachment 60612
Attachment 60613
This is what happened when I tightened up the screws for the auto hub.
How soon should a be changed.
Funny thing was it didn't seem that it was all that tight
Printable View
Attachment 60612
Attachment 60613
This is what happened when I tightened up the screws for the auto hub.
How soon should a be changed.
Funny thing was it didn't seem that it was all that tight
Should be changed asap mate. I seen you. Your name should be Arnold.
Whoah! That is unreal. Can't believe it broke like that!
I would definitely change it before you put it into 4wd next!
Forty foot pounds.
Not: "Do it up until
it snaps then back it
off half a turn!!!"
What about just 2wd on the road, shouldn't be a problem, right?
How common is this to happen.
It will be ok in 2wd ....
I fitted these to mine, not sure how much difference they make, but I imagine they spread the load a bit more than none at all.
http://www.ebay.com.au/itm/Nissan-GQ...item1ea27ce122
I thought they would have at least some sort of a washer. You will probably find the alloy was already fatigued, and that was the final straw.
I'd just upgrade to manual hubs to be honest.
If the Hub is still sitting flush on its seat, I don't see a problem driving in 2wd, just make sure you're not leaking any grease.
Cheers!
Must of had your wheties for breakfast.
They may of already been weakened/damaged. Should be fine in 2wd for now. Change before you need 4wd drive though.
Thanks for the replies.
Don't what to get a second hand pair, so what you you people recommend as a aftermarket type.
They're fine second hand mate.
Sent from my SM-P600 using Tapatalk
Most seem to go avm, but a second hand set of genuine hubs is just as good if not netter.Quote:
Originally Posted by jay see
Cheers
Only concern with s/h is what if the same thing happens.
Anyone got a set that they want to get rid of.
Nisshead has got one. I know the housing on his is good, the auto mech onone of his was shot i think. So he replaced it was a second hand one.
Sent from my SM-P600 using Tapatalk
Bugger mate. I just sold a pair of them on eBay this week.
Just seen these on ebay mate.
http://pages.ebay.com/link/?nav=item...623430&alt=web
Sent from my SM-G925I using Tapatalk
Thanks mate, I've seen those. Will see what they are closer to the end of bidding.Quote:
Originally Posted by sooty_10
Same thing happened to me and I went 4wding with and it was fine, keep a close eye on them and they didn't get any worse. Since I have replaced them with new manual hubs with a set of the washers cuppa mentioned. Fiddly job but not hard. http://www.ebay.com.au/itm/Auto-to-M...item3cff03fc99
4WD bits in NZ do an unbreakable FWH, but it comes at a price $$$$$
http://www.4wdbits.co.nz/ProductDeta...productID=4305
Too much spinach popeye
Too me a while to get this.. I guess you mean arnold schwarzenegger. Though arnie has probably never picked up a spanner in his lifeQuote:
Originally Posted by mudski