Has anyone installed a cabin air filter?
The chap at Supacheap sold me one when I was doing my last service, but there is actually no provision for a filter. I have heard that they can be retro fitted. Any help would be great.
Printable View
Has anyone installed a cabin air filter?
The chap at Supacheap sold me one when I was doing my last service, but there is actually no provision for a filter. I have heard that they can be retro fitted. Any help would be great.
Yes you can remove the glove box and there is a slot for it. In the Aussie model the slot is still moulded into the heater box. It is obvious though. Cut it out with a stanly knife and install the filter. How much was it and do you have a part number. It's a pollen filter
Here is my filter. ..ha ha ha. How the hell would I clean that.
Attachment 48252Attachment 48253
Crazy Jonathan!! Yes the GUIV has an option to fit a secondary filter. I have cut the spot but never fitted the filter, I should do that.
Thanks Fellas. I knew I'd get the right info in here. Love the forums!
I'll dig it out tomorrow and find the part number but I'm pretty sure it was around $16. After seeing the pics I reckon it's now going on my priority list before the pollen season for sure.
That pic is of a sh1tty ol GQ though mate.
Your GUIV will have a bigger box and take a flat panel filter that will slot in.
You can buy the kit for around $40, which has the two filters and the clips. Did it to my GUII, took a whole 5minutes. Filters get pretty dirty too...
It is easy fix, you do need to ask for the clip separately and Nissan parts monkey will tell you it doesn't fit Patrol only for Y61s, Pulsars, Maximas and X-trails. :icon_bonk: I didn't like the clip method as much so I secured it additionally with gaffa tape across each unit.
See pics.
Cheers
How in the heck do ya clean that still in the car??Quote:
Originally Posted by Bloodyaussie
Like this :-PQuote:
Originally Posted by Robo
Attachment 48312
would this filter kit fit all gu,s .mines a gu7 . do you need to remove the glove box whenever it needs cleaning / replacing or just for first time fitting . i've been in cars with cabin air filters in pollen season . it really helps with the hayfeaver .
It should fit as it is for Y61 and there is the provision for it. I don't see Nissan to change anything in a hurry. In any case Nissan should have fitted these from the start, the cheap bastards they're are! Have a look on yours if you've got that raised section in the plastic casing, you have than get the filters and cut away.....Quote:
Originally Posted by nipagu7
Glove box does need to be removed every time you wanna get intimate with the filters but it takes less than a minute to remove so what is the problem?
Cheers
To tell the truth I've cleaned a truck one with a garden hose.Quote:
Originally Posted by Crate
But no electrical's or carpet to worry about.
I purchased an aftermarket filter only to find no slot. I will attack it with a knife in due course. The aftermarket filter I have is just a single one and it seems to big for the slot though. Has anyone had any joy using an aftermarket one instead of the nissan ones?
What year is your GU? Mine had no slot but do have an obvious place to cut the slot formed into the plastic.Quote:
Originally Posted by strider
If the aftermarket part number corresponds with the OEM number you should be fine.Quote:
Originally Posted by strider
I don't have the part number in front of me but I will cut the slot and try again. I will post the part number when I get over to where I have the car stored. The slot and rails inside just look to narrow to fit it in. The other dimensions look about right. I'm happy to go and buy nissan if required (although slightly less keen since I discovered the parts girl isn't single ;)
Mine is a 2011 GU DX
Put a tarp down on the floor, use a wet & dry vacuum cleaner & a garden sprayer to clean the evaporator.Quote:
Originally Posted by Bloodyaussie
Clean the fan with a dry paint brush while vacuuming.
Graham
They want over $100 for the filters at nissan
I'm a bit new to this pollen filter thing. How would Nissan replace it if you wanted them to do it? Would they have to cut bits out of the car? Seems a pretty poor design. Any info gratefully received.
http://www.nissanpatrol.com.au/forum...017/06/200.jpg
Did the mod the other day... very easy, 20mins max to cut slot and install. Have a 2012 GU.
Bought my filter kit from Supercheap Auto for $50, but notice there are cheaper ones on eBay. Will order one of those next time... just wanted option to return if it didn't fit.
Air is so very fresh now! [emoji12]
Sent from my iPhone using Tapatalk
nice. i bought the filter from SCA but was the wrong part number!!! Have you got the Ryco number mate??Quote:
Originally Posted by 00marshall
http://www.nissanpatrol.com.au/forum...017/06/201.jpgQuote:
Originally Posted by MudRunnerTD
Sent from my iPhone using Tapatalk
Sweet. I need to put some new ones in mine.
Looking to do this on the weekend. From what perspective is this photo taken and what part is the filter kit? Lmao excuse the ignorance.
The rectangle section below yellow plug. Looks like it has two hole in it. Sorta. You cut this bit out and then slot the two panel filters in. The genuine kits come with a small metal clip to hold the two filters together. Not sure if the Ryco kit come with this clip though.Quote:
Originally Posted by bsteveo
http://www.nissanpatrol.com.au/forum...017/06/200.jpg
Thanks mate, that's sheds some light on it. And this view is obviously with the glove box dismantled ?Quote:
Originally Posted by mudski
Sent from my LG-H870DS using Tapatalk
Yeah mate.Quote:
Originally Posted by bsteveo
Too easy, thanks [emoji106]Quote:
Originally Posted by mudski
Sent from my LG-H870DS using Tapatalk
Is it only for gu4 & onwards or do all gu patrols have a slot for the filters.
Sent from my SM-G950F using Tapatalk
Soni have finally sorted this out today. I had a go a couple of years ago and cut the slot but bought the wrong filter.
I pulled the glove box out to change rear cameras and while its out i got this sorted.
So using this thread i went into Repco and got a price for the right Ryco Cabin filter. $96! WTF!! So while still in Repco i called Nissan and got a price for OEM. $60.... spoke to old mate at Repco and he was gobsmacked. I told him to have another go.... how does $40 sound? Be in tomorrow! Sold.
So a couple of important things i learned.
The filter is actually a 2 piece split filter.
http://www.nissanpatrol.com.au/forum...018/12/353.jpg
The filters sit on top of each other.
Here is the slot you have to cut out with a sharp knife.
http://www.nissanpatrol.com.au/forum...018/12/354.jpg
2 Filters
http://www.nissanpatrol.com.au/forum...018/12/355.jpg
Now one side of the filters has a little raised face, kind of castlated. You need to fit the top filter first and it goes in then up into position. Then the bottom slides in. Castles to the top ans bottom ans they lock in.
Check how the labels look.
http://www.nissanpatrol.com.au/forum...018/12/356.jpg
Then 3 layers of gaffa tape holds them in.
http://www.nissanpatrol.com.au/forum...018/12/357.jpg
Easy as. 5 minutes or less to fit. The entire glove box is held in by 7 Phillips head screws and it drops out in a couple of minutes.
No metal clip to secure the two filters in?
Sent from my iPhone using Tapatalk
you can also get a single pannel filter . i think i got mine from nissan from memory ( about 5 years ago now , probably time for a change ). no clips or anything to hold it in place , i just srewed a ss screw into the plastic to hold it in place .
It is for all GUs, one just have to cut a slot in the aircon/heater assembly housing where filters go. Easy done as it has a rise in it so can be traced with sharp knife aka box cutters.Quote:
Originally Posted by LuRkIn
The clips are available separately from Ni$$an $tealers.....Quote:
Originally Posted by mudski
Genuine Nissan part is also 2 piece p/n B727C-79925.Quote:
Originally Posted by nipagu7
I got mine 5 years ago but at that time they listed 2 part numbers and the parts monkey couldn't figure out the difference between them in the end it was 1x kit with 2 sets and 1x kit with 1 set. The securing clip is extra.
The funny thing was when I asked the monkey for the filters he said they're not available for Nissan Patrol and insisted on it all the while there was a sign listing the models for these climate filters and Y61 was proudly mentioned among others like Pulsar, Maxima etc....so I just turned the sign towards him and asked what is Y61?
Anyway, here the install instruction from aftermarket Mann filters, cause in clean Europe they need cabin filters but in dusty Australia we don't, LOL.
Gaffa tape works a treat. They're not going anywhereQuote:
Originally Posted by mudski
I Called Nissan and once they gave me the price i asked it it was a single or a twin filter. Twin filter it was. Happy days.Quote:
Originally Posted by nipagu7
Nice link.Quote:
Originally Posted by Rumcajs
Yes the first one o bought was for a Pulsar maxima and clearly is not the right one. It is about 35mm wide and will never go in.
Hi.
Is there a way to drop the bottom part of the evaporator box? I have undone the two visible phillips screws in the front and took off the pressure clip. The box can be forced down a bit to take a look inside (its dirty) but I could not understand from looking at it what had to be undone to fully drop it. I want to take the chance my dash is out to fully clean the evaporator.
Attachment 86328
I have also found the idea of adding a cabin filter wonderful, but that MANN code is for a Y61 specific filter, not available here. I would first have to find anything with close enough dimensions before committing on cutting the box.
This link has the OEM part number.Quote:
Originally Posted by BrazilianY60
https://patrolapart.com.au/product/g...ilter-retrofit
Not possible to get OEM locally?
Or try here.
https://partsouq.com/
https://www.amayama.com/en