Printable View
Hi Guys, Notice that there was a oil leak on driveway , had a look couldn't see where it was coming from , So I clean area where I think it was leaking . Started the car and as you can see in photo's , maybe above the oil filter or the oil filter seal is nicked and under pressure oil sparying out maybe . Any idea's guys regards Alex
p.s. car was running only 15 mins for that amount of oil on driveway
How long ago was the oil filter changed? Is it tight?
looks like it might be coming from behind the pump gasket
about 6 weeks ago , this is a new thing from a couple of days ago , just city drivingQuote:
Originally Posted by MudRunnerTD
are there easy to change over and whats with the pipes on top could they have a crack rubber at the cramp endQuote:
Originally Posted by menace 2
the only way to tell is to rely on our sight..completely clean the whole area...over it , under it , around it...if the car is high enough , chock the back wheels then just start it , get under it and see where it is coming from...take a rag under with you and keep wiping it off until you are sure you have where it is coming from...if it isleaking that much in 15 minutes then it wont be hard to see it mateQuote:
Originally Posted by altech
Yes done all that, just can't get my big head in closer --lol to see where !!! one of those moveable stick cams would be great and the top air intake doesn't help either as blocks view ..Quote:
Originally Posted by menace 2
Just change the oil filter again (leave engine oil in car)and clean the area up and re check for leaks. Its possible the filter has a small hair line crack or split in it. That would be what I'd do first. If you do change the oil filter make sure the rubber seal on the filter has some oil on it so the seal doesn't grab when you tighten it up.
It looks like its leaking from that oil cooler that the oil filter bolts onto. My 45 is starting to sweat from around there so i haven't taken it off to see exactly where its leaking from. But be aware there are 2 x heater hoses that attach to it coz the coolant is what cools the oil.
If you can get another car to drive i would pull it off and give it a closer inspection to see what can be separated to be resealed.
OK changed the oil filter ,but leak seems to above the filter case , so I have take off the oil filter unit offQuote:
Originally Posted by mudski
Hi 007, are they coolant or are they oil pipes that go to a radiator in front of main radiator regards AlexQuote:
Originally Posted by Alitis007
if you cant get your head in there use a mirror.
Those 2 hoses are water hoses mate, the oil comes from the block.Quote:
Originally Posted by altech
You might be able to have a better look if you took off the rubber splash guards from the wheel well. That should give a direct look at that cooler/ oil filter housing but you might need to remove the wheel to get your head in closer.
thanks for that info , I thinking leaking oil hose , trick that of list :thumbup:Quote:
Originally Posted by Alitis007
Hi Guys ,I think I have on top of the oil filter unit there the water cooler unit on top , in the middle of pipes there a 16mm bolt which I could tighten up a mm which it slowed it down abit , but if there a seal they I think whole thing has to come out . Guys you think im on the right track or not regards Alex
Hmmmm should check the Manual next time lol cheers Guys for help :cheers:
Your better off changing that "o" ring coz if its gone hard it will still leak even if you tighten the retaining bolt further
All clean and sealed . I wait 24 hours to dry and it was a good thing anyway one of the water hoses cracked up as I was taken it off , So I replaced both regards Alex
Hi Guys , oil cooler/filter unit back on block and No leaks . thanks for input over the days Cheers Alex :trink13:
Great outcome mate!! And thanks for letting us know you rectified the problem. Cheers!