Printable View
Hi everyone, i have a question about when doing a oil and filters change. Does anyone have any tricks on reducing the mess when removing the oil filters??? I loosen and let as much oil drain as possible into tray, but always have oil run over starter motor, side of engine, front tailshaft and uni.
Just a big mess evertime. Any ideas please ?
High pressure hot water once you have finished..
Kallen Westbrook
Owner of
Westy's Accessories
There was someone who was making nifty little drain trays for them maybe try googling it as I cant remember who it was.
put a plastic shopping bag over it once you have loosened it and then unscrew every thing goes into bag no mess
I lay a big sheet of plastic down first, then into container, no mess no fuss
Or you could ask Growler, lmao
Tappn the App Beers on Tap
Yep I have a couple of the item the bloke made. Works a treat! Actually I might be interested in selling 1. I bought 2 but it does not fit the GUIV with the TD42Ti as some of the anti pollution stuff is in the way. But LOVE IT on the GQ
I took some pics as I fitted it up, I'll have to go see if I can find the pics.
Basically it's a custom made tray that bolts to the engine block using existing threaded holes and has a hose hanging off the bottom that drains to the bucket your using. Works a treat and Zero mess
Wrong thread.. Doh
Yeah I'm reeeeel good at itQuote:
Originally Posted by wild98
Here's a spot on my lawn that copped it bad! Maybe 8mths ago now
Attachment 22341
Sent via my tapping thumbs
Thankyou for your ideas, i would love to see pic of drain tray and buy one if possible. I have often wished i was clever enough to make something like that.
old thread but if u crack the filters till they're loose (but not dropping oil) and then pull the sump plug 99% of the time doin this will suck oil from the filters. so after u drain the sump and put the plug back in when u take the filters off they shouldnt drip any oil. give it a try and let me know how you go
Old thread. Was just speaking to mudski about it this morning ... Next time I do the filters, I'll throw a jack passenger side of car and jack it up, it'll help with retaining the oil in the filters.
Like to see the pics please.Quote:
Originally Posted by MudRunnerTD
Still have that spare tray ??.
No pollution gear ex factory, interested in this idea for sure.
The Trays are made by Chicken who is a vendor I think on P4x4. I tried to get him over here but oh well.
He has now made a tray to suit the TD42Ti motor too and Stropp and I were Beta testers for it.
I now have a Chicken Tray on both my TD42s and they are AWESOME! Bastard to fit but wicked at what they do.
http://www.nissanpatrol.com.au/forum...015/10/430.jpg
http://www.nissanpatrol.com.au/forum...015/10/431.jpg
http://www.nissanpatrol.com.au/forum...015/10/432.jpg
http://www.nissanpatrol.com.au/forum...015/10/433.jpg
http://www.nissanpatrol.com.au/forum...015/10/434.jpg
I will have to check if I still have the spare? I think I gave it to AB when I fitted his winch up?
Sent from my iPhone using Tapatalk cause AB turned it back on!!
Nop I don't know what you're talking about ;)Quote:
Originally Posted by MudRunnerTD
The mighty GU CRD comes with a factory tray and drain hose. I will never be in the shit for oiling the lawn again!! Now for a way not to poison the lawn with coolant
Sent from my iPhone using My thumbs
Like the look of it indeedeee.
How much?.
would be sweet to installwhile engines out but going back in this weekend,
touch wood
PM
I think they were around $105 from memory.
Correction $115. Here is his thread.
http://www.patrol4x4.com/forum/suppo...ll-tray-72396/
I made mine from a piece of Trimdek guttering before I put the engine in.
There's a lot less room with the big Ebay starter motor.
I had to braze in a copper elbow and then ran a copper downpipe around the starter.
Once the engine was in, I had to remove the 2 filters to fit the starter so it was a good test. Worked a treat..
...
Attachment 62383
Opp's,Quote:
Originally Posted by AB
Now ya owe the boss something, lol.
If you have the engine out then you should be able to make something pretty easy to be honest. This item is simple in design and works a treat because its bloody tight down there to figure things out. If you have the engine on a stand the Easy Peezy.Quote:
Originally Posted by Robo
Yeah i gotta get me one of those trays. Bit exy on the price but he's spent the time for r&d so its worth it i reckon.
Bloody good invention that...
Yeah, the mission is the installation haha. I mean it's hard enough getting to the filters let alone, fitting this thing with the engine fitted to the car.Quote:
Originally Posted by mudski
Also you have a larger starter motor ? not sure if you'll have room for one of these...
They are a Bastard to Fit!!! If you have Small hands you will do it easier. be patient though! its a biatch!
Yes agree, thought of that also.Quote:
Originally Posted by MudRunnerTD
Yeah m2cw price is a little high have plenty of scrap ally laying around.
cheers