Yummo......Quote:
Originally Posted by 10G
Printable View
Yummo......Quote:
Originally Posted by 10G
Yep, I've always liked them, don't know why, just have.
Attachment 70924
Yep.. have never been able to put a finger on it....Quote:
Originally Posted by 10G
Hope the drive home was good and I didn't confuse you too much lol..
When I saw your new Avatar I thought RLI was back, that is what he used for a while.Quote:
Originally Posted by bigguwesty
Maybe he is..??Quote:
Originally Posted by TPC
So this is you Paul, you have hacked Westy's account???Quote:
Originally Posted by bigguwesty
Tell us a bit about your time in the Rhodesian Light Infantry.
more a spring roll type of guy, havent had a Chiko rollQuote:
Originally Posted by 10G
in ages
Well fark me trendsetters..Quote:
Originally Posted by TPC
Nothing worse than a Chiko Roll being pulled out of a freezer at the fish and chip shop, placed straight in to the deep fryer with out you knowing it and you bite in to an under cooked Chiko.Quote:
Originally Posted by threedogs
I changed to having spring rolls when it happened to me one to many times.
Back to the subject, I bought Platypus 15 Lb mono fishing line for the new reel.
Along those lines [no pum intended] I brought some
rainbow 60lb braid, just waiting for my mate to mend
till we hit the Murray again
Bought a Ford AU cargo barrier for the GQ for $70 , the fit I thought would be a bit of mucking around but because it was cheap and I can weld thought what the hey .
The fit is better than I thought perfect at the top , same profile roof , only need to make up top brackets as bottom can fix onto rear of drawers , will take some pics of before and after just in case anyone else is interested .
http://www.nissanpatrol.com.au/forum...017/02/124.jpg
And the leafblower! @rustynail @MudRunnerTD @Rossco hahaha
Quote:
Originally Posted by Winnie
Nice one mate. Good kit. Is it the Brushless kit?
I picked up the blower last weekend! Winner
Nah it's not brush less and it's the smaller drill too. $400 for the kit though it was cheap as!Quote:
Originally Posted by MudRunnerTD
Good price mate and a good kit. I have that drill and driver and both have some plenty of work.Quote:
Originally Posted by Winnie
It have the same setup.Quote:
Originally Posted by GQtdauto
Fits perfectly and total cost was $9.50 bloody bargain
Yeah it's amazing how good the fit is , I used the top brackets in the seatbelt mounts marked them and cut them , tack welded them and put the barrier back in adjusted the fit , removed welded the brackets on and only paint I had was black so touched up the welds with black .
Retried for fit and now I can't get the barstard back out , might have made it a bit too snug a fit .
Scored these lil beauties from a customer today. Even comes with a blue tooth mic thingymajiggyhttp://www.nissanpatrol.com.au/forum...017/02/131.jpghttp://www.nissanpatrol.com.au/forum...017/02/132.jpg
Sent from my iPhone using Tapatalk
@Yetisbeast having blue tooth does that mean the sound "could" now come out of your Double Din radio head set.
I was thinking of this blue tooth UHF years ago and now its finally here, might have to look into it a bit more
HowdyQuote:
Originally Posted by threedogs
From what I read it can work with a Uniden hands free phone car kit
The mic I was given comes with a blue tooth controller that clips to your shirt and you plug a head phone with built in mic so you can be away from the car and still use the UHF.
It also says there is an optional Bluetooth earpiece like we use on our phones
The instructions are very basic so I will have to have a play and see if it could be paired to my cars radio
Sent from my iPhone using Tapatalk
either way it has huge potential IMO
keep us updated please
Thought I might give this a crack for when we're travelling .
Attachment 70980
Scored the light bar for nix , now to rid the two spotties from in front the radiator and remove the "Nissan" badge which hopefully will help with cooling .
If I can fit the spotties on either side of roof rack will move them up there .Attachment 70981
And Inline air filter for the ARB twin under the pax seat. I have noticed a crap load of moisture comes through the hose so this should help. Although the stupid heads sent me one with the wrong thread. All the way from China. There goes my hard earned $4.50....
Attachment 71031
Brought some 90/100 H4 halogen headlight globes KISS
Also brought a panel RJ45 patch lead so I can move my UHF hand piece
more to the passenger side but still in reach of the driver
http://www.ebay.com.au/itm/122295190...%3AMEBIDX%3AIT
Nice shiny new viscous hub. Thanks Mudski .
http://www.nissanpatrol.com.au/forum...017/02/188.jpg
Sent from my SM-G900I using Tapatalk
You put it in yet?Quote:
Originally Posted by Hodge
I bought another 4 pack of Gentleman Jack on cokes. Bought 4 last night and drank them all and I got the taste for them now. I don't usually buy pre mixers.....
Fuel filter and front inner axle seals
Got the shroud and intercooler bracket off and then we copped guests. Fml. Will have to wait till Monday now, ran out of time.Quote:
Originally Posted by mudski
Went to the camping show to look at a tent and potentially buy one.
Bought this instead
Attachment 71047
Comfort plus for you guys and the new bubbs, well done mate!!Quote:
Originally Posted by lucus30
Hopefully we have it in time to make an appearance at yours. I think we get it the week after EasterQuote:
Originally Posted by MB
Will we get a camper trailer in at yours?
Too easy mate, the main driveway furthest away from the highway has had 40' container trucks up there so she'll be right:-) Let us know if you don't get delivery in time and we'll sort out a local little Jayco for you guys!
Ha ha thanks for the offer but we will probably just swag it if we don't get it in timeQuote:
Originally Posted by MB
I rewound an Alvey reel yesterday with 25 Lb (14.4 Kg) yesterday. Inherited four Alvey reels and five rods, one ten foot rod I`m getting new runners / guides put on.Quote:
Originally Posted by threedogs
Nooooooo.Quote:
Originally Posted by mudski
You drink it straight. I stick it in the freezer for a few minutes to chill it down.
Couldn't you get some of the oyta oil and fix yours.Quote:
Originally Posted by Hodge
I suspect the bimetallic spring on my hub is stuffed or playing up. Oil function only kicks in at the top end of temperature range.Quote:
Originally Posted by jay see
Instead of mucking around with it, I just got a new one. Just to be sure.
Personalised plates for the new Patrol. Used our initials and wedding date on QLD outback theme.
Sid
They are very addictive for sure - last time I checked the gentleman's were only a couple extra bux compared to normal as well!Quote:
Originally Posted by mudski
Sent from my iPhone using Tapatalk