Put the compressor in today, still need to finish off a bit and put switch in place but all works. Attachment 59313
Printable View
Put the compressor in today, still need to finish off a bit and put switch in place but all works. Attachment 59313
Removed the wiring loom from the ecu and engine and packed it up to send off. Also removed all wiring/ birds nest from the aux battery going into the cab. There was so many wires i couldnt remeber what these wires were for. Now im left with a gaping hole in the firewall loom boot.
Once the conversion is done, i will re wire the enitre aux side and what ever was attached there and put the aux back in.
Sent from my SM-P600 using Tapatalk
new bonnet struts.. lazy 25 bucka eBay spesh... so much better then using vice grips before..
Re mounted my ECU-talk and fabricated three brackets so the awning will sit level with the gutter.
going to re-think the gauge side of things, happy as with the awning set up.
No metal on metal contact anywhere.
my icv% is still reasonably high
Hard ware will be changed to allen round head stainless bolts nuts etc.
Dismantled Runva winch for a clean and regrease. Was so clean inside I needn't have bothered, surprising considering she's been swimming a few times.
Stripped and cleaned it all, and a regrease anyway, since I had it all apart. Parts cleaner would come in handy, but ah well, easy job.