Member on hard times parts list
Quote:
Originally Posted by
MudRunnerTD
From the front page for interest
Took a minute to jerry what was going on but thanks for adding Daz!!
Member on hard times parts list
Quote:
Originally Posted by
Alitis007
Just making a list of the parts we will need and would like to have for our Member on hard times thread. Theres going to be a wish list or goodies list and a need list that i will be updating as we go along.
PLEASE ONLY POST HERE IF YOU HAVE PARTS THAT YOU WILL LIKE TO DONATE OR THAT YOU THINK WILL BE A GOOD IDEA FOR THE GOODIES LIST!!
The car is an 01 GU ZD30 ( Built date 6/2000)
WHAT IS NEEDED
GEARBOX / synchromesh kit (4th gear ) -
Clutch kit - ordered
Rear main seal OEM -
Rear diff - donated by Nissannewby
Recovery points - donated by Threedogs
Battery - donated by Mudski
Oils : Front diff 80w90 up to 5.4 liters -
Rear diff 140w ( or 85w140) up to 4.7 liters -
Transfer case TX12A ( 75w90) 1.9 liters -
Gear box TX12A (75w90 ) 3.5 liters -
2 X Swivel hub kits and bearings ( bearings felt good but need to look for pitting and metal filings ) -
Rear stabilizer bar link rods, long and short ( 2" lift) -
Rags, rags, RAGS!!!! And paper towel - Healy, BA
HTB / High Temp Bearing grease -
Brake fluid ( DOT 4) - 2 X 500ml -Plasnart
CV / Constant velocity grease -
SAFETY EQUIPMENT
Jack stands - MR 1 set
Trolley jacks - MR 2 x 2000kgs jacks
Wheel chock's -
Safety glasses - MR has Heaps
Gloves ?? Leather and silicon / rubber - MR will bring a box of Nitriles (100)
Hand cleaner ( Good stuff/ Jiff works too) - Alitis007 (i can get some for free but won't be to AB's till late)
WISH / GOODIES LIST
To be revealed - Westy's accessories
Rear work light with mounting stand -
Rock sliders (the ally side steps look fantastic ATM) -
Wheel arch flares and rear bar with moulded flares (sorry mate it looks anorexic lol) -
Spotlights ( who was showing them off the other day ????) -
Tools
Like i said i will add more to this list daily!
Thank you for all your help and support!!
And a big thank you to Bloodyaussie / Jonathan for organizing this special event!!
Here is where we are at for the moment!
Member on hard times parts list
Guys, how much/what electrical work is required?
Need to make sure I have enough corrugated conduit/cable ties/terminals etc.
Switches?
Cheers,
Drew
Tip tip tip......tap tap tap....
Member on hard times parts list
Quote:
Originally Posted by
Drewboyaus
Guys, how much/what electrical work is required?
Need to make sure I have enough corrugated conduit/cable ties/terminals etc.
Switches?
Cheers,
Drew
Tip tip tip......tap tap tap....
Not sure about switches but will need wire, electrical tape, heat shrink, soldiering iron and soldier plus what you got mate! Later on i'll add to the list
Re: Member on hard times parts list
I can get a pack of electrical tape and a few lengths of heat shrink in different colours. Consider that my contribution. Remember I work at an electrical wholesaler but we don't do 12V stuff, I will donate what I can.
If you're happy and you know it tap a post!
Member on hard times parts list
I've got a bag of 10,000 Heat stabilised cable ties, some split conduit, a few various terminals my soldering iron, solder and some wire but might need more depending on what we need to do.
George (or anyone), are you able to get your hands on some cheap 12V wire (4mm)?
Tip tip tip......tap tap tap....
Member on hard times parts list
Quote:
Originally Posted by
Winnie
I can get a pack of electrical tape and a few lengths of heat shrink in different colours. Consider that my contribution. Remember I work at an electrical wholesaler but we don't do 12V stuff, I will donate what I can.
If you're happy and you know it tap a post!
Chris wire is wire, cars use 10amp mainly and 15 amp wire generally but i'm not sure if 12v is different to 240v but i do know that the wire used in the house walls is rated 10 amp but is 15 amp wire if that makes sense?? Even tho most power points are 10 amp they under rate. When i go to work on monday i'll look at a spool and post a pic of its specs.
Heat shrink is a hard one but i do know Narva make a small pack with red and black with different gauge heat shrink like .9mm, 2mm, 3.4mm etc etc so sort of pack like that would be fantastic
Member on hard times parts list
Quote:
Originally Posted by
Drewboyaus
I've got a bag of 10,000 Heat stabilised cable ties, some split conduit, a few various terminals my soldering iron, solder and some wire but might need more depending on what we need to do.
George (or anyone), are you able to get your hands on some cheap 12V wire (4mm)?
Tip tip tip......tap tap tap....
Lets see what Chris has at his work and figure it out on monday night??
Re: Member on hard times parts list
Sorry George wire is not wire. Automotive cables will be required. Housing wire has much thicker stranding and will not be up to the punisment of corrugated roads and will break.
If you're happy and you know it tap a post!
