Put in the new MAF And reset the ECU. Hopefully it will fix the limp mode problem.
Printable View
Put in the new MAF And reset the ECU. Hopefully it will fix the limp mode problem.
I actually had a day off today so I went and picked up my long range aux tank from the cleaners, removed my dash cluster to fix the fuel and temp gauge needles and fitted a bent adjustable upper control arm. Now to get another day or three off to do the tank install.
This showed up today. Diesel Smart. Can't really tell much difference when driving. Pyro goes on at the end of the week.Attachment 55775Attachment 55776Attachment 55777
Well I got back last night from Newcastle where the Patrol got all new bushes (the originals were still in there and in terrible condition), 2" suspension lift, a rebuilt rear diff, new front wheel bearings and rebuilt hubs. The rear wheel bearings didn't get replaced as the ones in there were almost new, clearly the last owner replaced them not that long ago.
She drives so much better now and has a lot more grunt. The 3 and 1/2 hour trip back home only took 3 hours, quite a difference. :D
Just finished pulling the diff out of the ute, and the diff out of the shorty.
Probably put them back in on Friday.
Cheers
Fitted the new rear drawers. By my self. :)
wheres the picsQuote:
Originally Posted by katwoman
You will have to wait and see em in real life !! If u can see past the shine of the bullbar.Quote:
Originally Posted by roofy
Ba ha ha ....Quote:
Originally Posted by the evil twin
so we will not see it at the next meet then you wont want to scratch the new paint ?Quote:
Originally Posted by katwoman