Printable View
Agree mate, the termites are nuts. This is about half of the timber I collected today, all the heartwood was filled with termites, there were ALOT.http://www.nissanpatrol.com.au/forum...021/04/313.jpgQuote:
Originally Posted by AB
Sent from my SM-G965F using Tapatalk
No, it's the Philips All in One Multi Cooker
Scavenge a few chooks and fence them off around the pile of infested wood for a few days. Termites be gone, and you get a roast chook in the end. :thumbup:Quote:
Originally Posted by AB
Do it all the time with termited power sticks we cut up.
Yeah I used to have chooks and they loved doing that, especially any grubs that come out.Quote:
Originally Posted by Hodge
A full bowl of fruit loops for breakfast.
Then onto the forum. More fruit loops. Glutton!!Quote:
Originally Posted by nissannewby
Attended my first Elvis convention today! Not sure what they're doing here at this time of year though!
Attachment 83409
Where was this Plassy?Quote:
Originally Posted by Plasnart
I drive past the Essendon airport daily, where theyre usually parked. I guess fire seasons is over so theyre moving them on....
Port of Geelong Hodgey. Lots of large freight comes in and out of here. Often wind turbines, sometimes huge transformers or other mining stuff, have seen oil rigs come in for refit, and other massive stuff. Today the air cranes were in. Yeah maybe dismantling and readying for return to northern hemisphere. I was surprised they were still here to be honest.Quote:
Originally Posted by Hodge
Quote:
Originally Posted by katherine
Quote:
Originally Posted by mudnut
Yeah but can you write an essay for me so I can cheat my degree?Quote:
Originally Posted by katherine
Why isn't this skank already banned?Quote:
Originally Posted by katherine
Damn You Super Sleuth Plassy[emoji1998][emoji41]Quote:
Originally Posted by Plasnart
Hoodwinked I’ve Been [emoji26]
Kathrine I thought:
Patrols [emoji736]
Tucker Farker [emoji736]
You’re a Prick [emoji23][emoji736]
Sent from my iPhone using Tapatalk
Awwww, shucks, I was havin' fun with this slightly intelligent one.Quote:
Originally Posted by Plasnart
Finally back up to our little coupe today to run some post summer tests:
http://www.nissanpatrol.com.au/forum...021/04/327.jpg
Happy days, sapwood is running wet early and the Iron-bark is nearly popping off with a bit of encouragement [emoji106][emoji106]
http://www.nissanpatrol.com.au/forum...021/04/328.jpg
Time to get real busy this winter/spring ahead to regain some coin from the debacles of Covid 2020!
http://www.nissanpatrol.com.au/forum...021/04/329.jpg
Oh......and Irish-Pork sausages from our new hometown butcher out there were deliciously happy on the Coleman Hyperflamey [emoji23][emoji106][emoji106]
http://www.nissanpatrol.com.au/forum...021/04/330.jpg
Sent from my iPhone using Tapatalk
Bloody ripper mate! How's the old FJ going?Quote:
Originally Posted by MB
Sent from my SM-G965F using Tapatalk
AB’s Old ‘Mongrel’ is still going strong Mate [emoji23]....but full of Arachnids [emoji51] we’ll have to drop a bug bomb in cab before tomorrows haul out, especially after tonight’s special Straya Spooky Moon [emoji106][emoji106]
https://www.google.com.au/amp/s/amp....icle/100066644
http://www.nissanpatrol.com.au/forum...021/04/331.jpg
http://www.nissanpatrol.com.au/forum...021/04/332.jpg
Even the little trailers King’s Fluro Orange rope is spooked and has turned white [emoji23]
http://www.nissanpatrol.com.au/forum...021/04/333.jpg
Sent from my iPhone using Tapatalk
Finally have some action happening with our deck! Couldn't get somebody to do the work for us so we did it ourselves.
http://www.nissanpatrol.com.au/forum.../2021/05/1.jpg
http://www.nissanpatrol.com.au/forum.../2021/05/2.jpg
http://www.nissanpatrol.com.au/forum.../2021/05/3.jpg
Sent from my SM-G986B using Tapatalk
"Dad! Dale dug another hole and this one's filling with water!"Quote:
Originally Posted by Winnie
A big step. Good stuff, Winnie.
Good on you Winnie, the last big deck I built I did the holes by hand, but was younger and stronger then, not today, someone else can do it and all I have to do is lift the index finger and punch the phone to transfer the money. How did you go operating the digger - first time or used it before - might have a requirement on the new block for one.
Yeah these holes had to be 450mm wide and 600mm deep, there are 21 holes so for $300 I'm happy hiring the machine!Quote:
Originally Posted by PeeBee
It was my first time using something like that but it was so easy to use. They did not give me a run down on it and within 10 mins I was a pro.
Sent from my SM-G986B using Tapatalk
It doesn't flex very well though.. realistically no worse an ifs hiluxQuote:
Originally Posted by Winnie
BAHAHAHAHAHAHA Benny
Bought some replacement headlight globes as one of them was shot.
With a very evil grin I agreed for the Supercrap bloke to "fit" the globes for $10 after he offered...
For those who know the back of the GU headlights, know the pain and misery of getting those globes in and out.
10 minutes later and assistance from the other members in-store, they caved in. Wasn't happening.
Anyways back home. Grille off, 10mm socket, 10 minutes and job was done. 3 x 10mm bolts on each headlight. Undo, pull forward, full access to everything. How I've always been doing it!
Haha you're a cruel bastard, hilarious.
Sent from my SM-G965F using Tapatalk
get to work this morning. Patrol is covered in black goo, take a sniff, diesel oil. All up the inside of the guards, sprayed up the rear of the vehicle.
Heck, what's let go me thinks.
look further, more oil, not so much on the passenger side.
look further, it's sprayed up the front of the front wheel arch.
Me thinks, hmm, that really can't happen, it should all be blown backwards, not to the front of the front wheel arch.
Down on knees, dry as a desert underneath.
Then I thinks, remember that B double parked on the side of the road, no one around, middle of nowhere, I bet he's blown a hose.
MONTH OF FREEDOM!!!!!!
My youtube viewing is set.
Enjoy Ben Mate [emoji106][emoji106]
Plenty of Trophy Truck Wicked Highlights over in your Youtube Thread Pretty Please [emoji120][emoji120]
Sent from my iPhone using Tapatalk
Managed to get my greys online $50 welding bench purchase off my trailer solo. It fits in perfect, and the vice it came with is bloody awesome. It's a 150mm dawn Australian made vice. Hoomungus!!
Should give me a nice safe area to practice welding without burning my shed down.http://www.nissanpatrol.com.au/forum...2021/05/61.jpghttp://www.nissanpatrol.com.au/forum...2021/05/62.jpg
Sent from my SM-G965F using Tapatalk
That is a great pickup Nic. The vice alone is worth a hell of a lot more than what you paid for the whole package.
Sent from my SM-G986B using Tapatalk
Far out I knew it was worth the $50 I paid but didn't realise how much! Ripper thanks for the encouragement to look it up lolhttp://www.nissanpatrol.com.au/forum...2021/05/63.jpgQuote:
Originally Posted by Winnie
Sent from my SM-G965F using Tapatalk
Just don’t spill any of that crap you’re drinking on it. Too good to kill it[emoji15]
Sent from my iPhone using Tapatalk
It's a ripper mate. I looked for aged for a good Dawn vice but people want $500 for an old rooted one. A mate ended up giving me an old Record vice made in England. It originally belonged to Terry Brain who was a motor mechanic and top VFL player in the 1930s.
Sent from my SM-G986B using Tapatalk
That's awesome mate, I really know nothing about them but if they are Aussie they must be great! To be fair for all the surface rust etc the action is still smooth, im impressed compared to my Chinese ones. Still $500 is alotta money for a rooted one.Quote:
Originally Posted by Winnie
Sent from my SM-G965F using Tapatalk
Eh it's not that bad mate, leaves me with a smile when I'm shitty so that's a good thing [emoji16]Quote:
Originally Posted by Maxhead
Sent from my SM-G965F using Tapatalk
So would VB. Should have warning signs on them two. :)Quote:
Originally Posted by rusty_nail
Busy day tomorrow working on my own, will be well worth it though!
http://www.nissanpatrol.com.au/forum...2021/05/67.jpg
Sent from my SM-G986B using Tapatalk
Very nice, think you need to paint the trailer blue, plus that's one very fresh look'n Barrow. . .
Sent from my SM-G781B using Tapatalk
Yep it's a brand newy picked up yesterday, ye olde plasticcy tub was no longer up to the task so treated myself to a Kelso
Sent from my SM-G986B using Tapatalk
Can’t beat a good old slippery steel bucket for Conrete, if well looked after Chrisso Mate [emoji106][emoji106]
Slippery dip lightly H20 lubricate between runs and finish your day off like a real old Sicilian with a protective Olive Oil smear to park up [emoji106][emoji106]
Placcy buckets on wheels with light scratches stick conc like shit to a blanket, Very Hard Unnecessary Aussie Yakka [emoji2959][emoji123][emoji123]
Sent from my iPhone using Tapatalk
I read that and thought, H20 must be something like WD40. [emoji848]Quote:
Originally Posted by MB
Then I realised it was just plain old H²O. Water.
[emoji12] You MB'd me @MB [emoji23]