Attachment 44145Attachment 44144
Added some LEDs to my rear door table
Printable View
Attachment 44145Attachment 44144
Added some LEDs to my rear door table
I got a loom from the rear of a falcon sedan and put led globes in them. Used a hole saw to make the hole then used a semi round file to just make it fit.. Was pretty easy then wired it in from the lights in the bar..Quote:
Originally Posted by Patrol-Guy
Yep on order from brightlight auto. I only use them. Even though they are a little on the dear side, their lights are very good as the Chinese ones aren't very bright.. When it's dark I'll take a few snap shots.Quote:
Originally Posted by threedogs
Thanks, is there a need for resistors?Quote:
Originally Posted by chrisc2306
Hit limp mode for the first time ever! 19psi in third gear..
Nope no need for resistors just replace the standard ones with led style ones and away you go. This is the ones I got obviously they are 24v because I have a safari but you can get 12v ones tooQuote:
Originally Posted by Patrol-Guy
http://www.ebay.com.au/itm/221423169...84.m1423.l2649
While I had the ceiling down I decided to relocate the Redarc BMS head unit to the overhead console. Routed the head unit cable up the B Pillar and across the roof.
http://i935.photobucket.com/albums/a...psybjr4q6x.jpg
http://i935.photobucket.com/albums/a...psngsejhav.jpg
http://i935.photobucket.com/albums/a...ps1so03mma.jpg
Tracing the feared 24v to 12v converter wires! :O they are all cut....
Replaced the front 31-10.5x15 tyres
How did you go removing the roof lining from the front window rubber??Quote:
Originally Posted by BenK