Wheel options

Printable View

Show 40 post(s) from this thread on one page

5th August 2016, 07:58 PM
besp

Wheels and tyres on today.
285/75 on a 16 rim with neg 13.
Thanks for all the help.
http://www.nissanpatrol.com.au/forum...2016/08/59.jpg
http://www.nissanpatrol.com.au/forum...2016/08/60.jpg
7th August 2016, 10:20 PM
jay see

Quote:

Originally Posted by besp

Wheels and tyres on today.
285/75 on a 16 rim with neg 13.
Thanks for all the help.
http://www.nissanpatrol.com.au/forum...2016/08/59.jpg
http://www.nissanpatrol.com.au/forum...2016/08/60.jpg

I hope a little lift is next on your list.

Sent from my XT1068 using Tapatalk
7th August 2016, 10:32 PM
besp

Quote:

Originally Posted by jay see

I hope a little lift is next on your list.

Sent from my XT1068 using Tapatalk

Yes it's sitting a bit tight.
I'm researching a 2" lift right now!
7th August 2016, 10:36 PM
jay see

Quote:

Originally Posted by besp

Yes it's sitting a bit tight.
I'm researching a 2" lift right now!

Good, it doesn't look right ATM.

Sent from my XT1068 using Tapatalk
31st October 2016, 07:23 PM
bsteveo

Quote:

Originally Posted by jay see

I recently fitted 305/70/16 on 16x8 neg 13 on a series 1 GU.

Drivers side.

http://www.nissanpatrol.com.au/forum...016/07/253.jpg

Passenger side.

http://www.nissanpatrol.com.au/forum...016/07/254.jpg

This is with a 2" lift.
Adjustable panhards will recenter the diff, but as you can see it's not a lot.

Sent from my XT1068 using Tapatalk

Is this common? I just changed from the stock 17" alloys to 16x8 steel rims , no idea offset as I bought them used a few years ago. But I've noticed the same thing, drivers side hangs out past guards , passenger side doesn't

Sent from my HTC_0PKV1 using Tapatalk
1st November 2016, 08:43 AM
MudRunnerTD

Quote:

Originally Posted by bsteveo

Is this common? I just changed from the stock 17" alloys to 16x8 steel rims , no idea offset as I bought them used a few years ago. But I've noticed the same thing, drivers side hangs out past guards , passenger side doesn't

Sent from my HTC_0PKV1 using Tapatalk

It's a Panard adjustment. This is the reason you need adjustable Panards when going taller than a 2" lift. The difference gets bigger the higher the lift.
1st November 2016, 08:52 AM
bsteveo

Quote:

Originally Posted by MudRunnerTD

It's a Panard adjustment. This is the reason you need adjustable Panards when going taller than a 2" lift. The difference gets bigger the higher the lift.

Ah fair enough, thanks for that I thought I was going insane

Sent from my HTC_0PKV1 using Tapatalk

Show 40 post(s) from this thread on one page