One of the two can be arrange, at a cost.Quote:
Originally Posted by mudski
Printable View
One of the two can be arrange, at a cost.Quote:
Originally Posted by mudski
And yes it does. Made to fit with OEM mounting. I even have the OEM rubber that's under the bonnet on there...Quote:
Originally Posted by MEGOMONSTER
Website says $588.Quote:
Originally Posted by Hodge
Now I found this in the fine print.
$538 for louvre and scoop.
Do you know if that's painted? If not I wonder how much it costs to get them painted at the local panel beater?
I paid just over $600 unpainted But that was delivered, came wrapped in bubble wrap and inside a wooden box.
I went to the local auto paint shop and they mixed up some paint in the factory colour and put it in a spray can, and I painted it my self, not difficult and came out very good.
Mine came painted white from Guests. As my car is white...Quote:
Originally Posted by Rocket55
They come white but I would clear coat that for a better finish, to fit all you need in a minimax socket set and un-do 4 or 6 x 10mm nuts,
there is a steel retaining plate plus the rubber cushion.
After cleaning the bonnet of dirt etc with an alcohol wipe pull off the backing tape and place scoop in position,
then place rubber cushion and steel retaining plate in position and re tighten the 4 or 6 nuts DO NOT OVER TIGHTEN
Could you just use a 3M vinyl wrap for the scoop?
I think that's what I'd do plus the whole bonnet also.
As I get lots of glare from my roof rack lights but I guess my eyes just adjust anyway.
Just ordered the scoop, $588 + $42 postage + $10 packaging & admin. Will be here late next week.