Drivers sideQuote:
Originally Posted by Parksy
Attachment 34651
Passenger side
Attachment 34652
If you do find cracks remember to drill the end of the So you have a radius end, or it will keep cracking.
Small 3mm hole is enough
Printable View
Drivers sideQuote:
Originally Posted by Parksy
Attachment 34651
Passenger side
Attachment 34652
If you do find cracks remember to drill the end of the So you have a radius end, or it will keep cracking.
Small 3mm hole is enough
Picked up my front rotors. My RDA extreme gold pads for
Front and rear should arrive next Tuesday , can't wait to fit
them.
Installed a compi shift 2 stand alone tcm in my 01 patrol converted from 3.0 to td42t
Attachment 34660
Finally fitted a new power aerial mast.
Breather for main tank blocked. Got cleaned ready for another week if work. Rain coming soon so ordered new winch too.
Looking schmikoQuote:
Originally Posted by Coastalpatrol
Thanks mate! Spent sometime working on it! Almost ready for the road again!
Got wheel bearing done.. Guess it didn't seat properly because all nuts were tight.
So have reset and put back together. Getting more confident with it all now.. 15 mins to do side..
Then started on the roof rack.. Got the width right but it sits 3mm Off the roof so to low.. Half removed the old bulky mounts and will make some nice ones..
Yesterday I fitted a baby capsule now it's nice and cosy across the middle row of seats with three kids seats on there.
Glad I got the crab bar fitted
Attachment 34785
Sh!t is getting very real now, tomorrow we will have three kids.
Congrats and good luck to ya mate, 3 kids are fantastic ;)Quote:
Originally Posted by firm351